Nyeekoy TH17H0216 Convertible Toddler High Chair Table Baby Booster Seat User Manual

Nyeekoy TH17H0216 Convertible Toddler High Chair Table Baby Booster Seat

PRODUCT INFORMATION

Model Number:

• TH17H0216
• TH17K0217
• TH17L0218

Instruction for Highchair

Important-Retain for future reference, read carefully Suitable from 6 months to 6 years; less than 18kgs when the child could sit by himself. it could be used as table after 3 years old.

Maior parts name

Installation instruction for Highchair

Assemble the backrest and booster

1. Button up the backrest and booster, and put the bolt into the axle holes(fig. 1)
   Assemble the booster & backrest and the armrest
   

2. Put two screwed pillars on the base into the correlative hole on the left of the chair armrest (fig.3)

3. The pillar on the backrest is put into the correlative revolving holes( fig.4)

4. Using the screwdriver, insert the plastic screws into holes until locked (fig.5)

5. Insert two chair joint parts into the correlative holes.(fig.6) Then using the screw, fix up the joint parts, which is the same as step 3 (fig. 7)
   Assemble the table
   

6. Insert tabletop, table joint part B into the correlative left or right holes(fig. 9&10) And tighten the screws and lock
   Assemble the chair and table
   

7. Assemble the front chairs to match the table (fig.11) then press the button finished as(fig.12)
   Install and adjust the adjustable tray

8. Inset notches on both sides into the correlative place (fig.13): Press the adjustable button and meantime pull the tray out until heard the click (fig.14&15) The tray could be adjusted 3-positioned.
   Adiust the backrest

9. The backrest could be adjusted 3-positioned: Pull up the adjustable button and then to the desired position. (fig. 16′
   Remove and discharge the cover

10. Press the oval button on the middle of the buckle, and open the buckle. (fig. 17)

11. Press the button on the insert buckle side, and pull the belt out(fig. 18)

12. Pull out the belt from the buttonhole, then discharge the cover. (fig. 19-22)

Install table leg cover

1. Please make sure there are four different covers D1, D2, D3, and D4. Install each cover into the correlative position(fiq.23)
   • Status when using as table and chair
   • Highchair operating instructions
   • Fitting your child into the chair
   1. Sit your child into the chair after fixing it.
   2. Fasten the buckle.
   3. Adjust the belt system to the desired length.
   4. Install the adjustable tray.

Warning

1. Do not use it until your child can sit by himself.
2. Do not use if any spare parts are broken, attrited or missed.
3. Do not use until all spare parts are rightly assembled and adjusted.
4. It is extremely dangerous to place the high chair near the fire, or heating appliances, such as electric welding and gas heater. Do not do it.
5. Prevent serious injury or death from falls or sliding out. Always secure the child in the restraint. Never leave a child unattended.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>