PALRAM Dallas Gazebo 12×16, 3.6×5 Instruction Manual
- June 12, 2024
- PALRAM
Table of Contents
PALRAM Dallas Gazebo 12×16, 3.6×5
Product Information
The product is the DALLASTM 12×16 / 3.6×5 gazebo manufactured by Canopia, a member of Palram Industries Ltd. The gazebo is designed for outdoor use and comes with assembly instructions.
Product Usage Instructions
Step 1: Before starting assembly, please read the instructions carefully. Keep the instructions in a safe place for future reference.
Step 2: To watch the assembly video, there are four ways:
- Scan the QR code provided in the manual.
- Search “Palram – Canopia Dallas Assembly” on YouTube.
- Visit https://bit.ly/35AFShg.
- Visit https://canopia.com/product/dallas-gazebo/.
After Sales Service
If you have any issues or need assistance with missing parts or assembling the
product, you can use the self-service form on the canopy.
shop/part_request.
Alternatively, you can contact customer support through the provided phone
numbers and email addresses.
Customer Support
If you have general questions or need further assistance, you can visit canopia.com/contact-us. The customer support contact information for different regions is as follows:
-
CANADA: 905-5646007,
sales@footprintproducts.com -
GERMANY: 0180-522-8778,
customer.serviceDE@palram.com -
FRANCE: +33-169-791-094,
customer.serviceFR@palram.com -
UNITED KINGDOM: 01302-380775,
customer.serviceUK@palram.com -
ISRAEL: 04-848-6816,
customer.service@palram.com -
AUSTRALIA: 03-9219-4444,
salesvic@palram.com
For specific regions or products, additional contact information is provided in the manual.
IMPORTANT:
Please read these instructions carefully before starting assembly. Keep these
instructions in a safe place for future reference.
www.canopia.com A member of Palram Industries Ltd.
HOW TO ASSEMBLE VIDEO
4 WAYS TO WATCH OUR VIDEO
-
Scan QR Code
-
Search on YouTube
-
Go to
https://bit.ly/35AFShg
WE´VE GOT YOU COVERED
Our self-service form makes it convenient and fast. Go to the URL below or scan the QR code with your phone to submit your request.
SCAN ME
SITE PREPARATION & FOUNDATION
PREPARE THE SITE
The product must be positioned and fixed on a flat-level surface.
- Clear the site
- Level the ground
IMPORTANT
We recommend checking for restrictions or covenants for building this product in your area. In addition, we advise to check if you need to submit any forms or if any permit is required prior to building the product.
CHOOSE YOUR FOUNDATION TYPE
Option 1: Concrete/ Wooden surface
- The screws and masonry anchors supplied with the kit are suitable for concrete fixing only.
- Please consult with an expert regarding which fasteners are suitable for other surface types (not supplied).
Option 2: Paving stones
- a-10cm/4″ I b+c-40cm/1’4″
- Dig holes into the ground and fill with concrete.
- For frozen areas, please check the required depth needed for these holes.
Option 3: Solid ground/ Asphalt
- a-40cm/1’4″ I b+c-40cm/1’4″
DIMENSIONS
The Illustration describes the center-to-center distance between poles.
SAFETY ADVICE
- It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps.
- Always wear work gloves during panel sliding .
- Always wear shoes and safety goggles when working with extruded aluminium.
- If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
- Do not touch overhead power cables with the aluminium profiles.
- Do not attempt to assemble the product in windy or wet conditions.
- Do not climb or stand on the roof.
- Dispose of all plastic bags. Keep them out of reach of small children.
- Keep children away from the assembly area.
- Do not lean against or push the products during construction.
- Do not position your product in an area exposed to excessive winds.
- Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
- Hot items such as recently used grills, blowtorches etc. must not be stored in the product.
- Make sure there are no hidden pipes or cables in the ground before anchoring to foundation.
- This product is designed to be used mainly as a garden gazebo.
- Make sure to anchor the product directly to a solid foundation to increase the product’s stability and wind resistance in areas with severe weather conditions. Make sure that there are no obstructions between the assembly area and the final position of the product.
CARE & MAINTENANCE
- When your product needs to be cleaned, use a mild detergent solution and rinse with cold clean water.
- DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels.
- Clean the product once assembly is complete.
TOOLS & EQUIPMENT
- 4x people needed
- Ladder
- Wrench 13 mm I 1/2″
- Wrench 10 mm I 3/8″
- Electric Drill With Drill Bit 10 mm I 3/8″
- Cordless Drill -Philips Head
- Spirit Level
- Philips Head Screwdriver
- Torx Head Screwdriver
- 2x Trest e/Sawhorse
BEFORE ASSEMBLY
-
Selecting a site:
Choose your site carefully before beginning assembly.
Choose a sunny position away from overhanging trees.
The product must be positioned and fixed on a flat level surface. -
The product must be secured directly to a solid foundation.
-
This is a multi-part assembly best achieved by two people. Allow at least half a day for the assembly process.
-
Take all components & parts out of the packages. Sort the parts and check against the content parts list.
-
Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost.
-
Please note that multi-sided profiles are used in this product. As a result some holes in the profiles are not used during assembly.
-
Please review entire instructions before starting. Carry out the assembly steps in exact order.
-
Please consult your local authorities if any permits are required prior to constructing the product.
-
Please ensure you have sufficient side space for inserting the roof panels during the assembly process.
IMPORTANT:
- Firmly connect the product to a level surface immediately after completion of the assembly .
- Anchoring this product to the ground is essential to its stability and rigidity. It is required to complete this stage in order for your warranty to be valid.
- During assembly use a soft surface below the parts to avoid scratches and damages.
DURING ASSEMBLY
- During assembly, you will encounter different icons for different products. Please see below for more information:
- During assembly you will encounter the information icon, please refer to the relevant assembly step for additional comments and assistance.
DURING ASSEMBLY
IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly, please refer to the relevant assembly step for important additional comments.
- Step 2 (c): Connect the profiles #9516 by pushing while closing screws #9487.
- Step 3 (c): Connect the profiles #9324 by pushing while closing screws #9487.
- Step 8 (a): As shown in the illustration, using a pencil/pen mark around the bottom of the leg.
- Step 5: Make sure that the frame is perfectly rectilinear by measuring the diagonals and verifying that they are the same.
- Step 11 (a): Level the profile legs by releasing the screws partially, adjust the profiles and re-tighten the screws.
- Step 17: Hold the top vent cover until completing assembly.
References
- Contact Us Archive - Canopia
- tex.com
- Inspection Systems for the Electronics Industry – Viscom – Viscom
- Αρχική Σελίδα - Alpaco Domica
- Canopia United Kingdom - Celebrate Outdoor Living
- YouTube