Palram – Canopia 83677 Mythos 6′ x 10′ Greenhouse Instruction Manual
- June 17, 2024
- Palram-Canopia
Table of Contents
Palram – Canopia 83677 Mythos 6′ x 10′ Greenhouse
Specifications :
- Model: HarmonyTM | HybridTM | MythosTM
- Size: 6×10 / 2×3
- Recyclable
- Product Code: 83677_23.07_MV-5.5
How to Assemble
- Read the instructions carefully before starting assembly.
- Keep the instructions in a safe place for future reference.
- Refer to the How to Assemble video guide by scanning the QR Code provided or visiting canopy.shop/Assemble-GH6.
- If you need further assistance, visit canopy. shop/support.
Frequently Asked Questions (FAQ)
- Q: What should I do if I encounter issues during assembly?
A: If you encounter any difficulties during assembly, refer to the How to Assemble video guide or contact our customer support at canopia.com/contact-us for assistance.
HOW TO ASSEMBLE
IMPORTANT!
Please read these instructions carefully before starting assembly. Keep these
instructions in a safe place for future reference.
www.canopia.com
HAVE A CONCERN?
WE CAN HELP.
Before returning your purchase:
Please take a look at our
“How to Assemble” video guide. Scan the QR Code below or go to canopia.shop
/Assemble-GH6
You didn’t find what you were looking for?
We can help at canopia.shop/support
Still can’t find what you are looking for?Please see next page for local
customer care.
BASE DIMENSIONS
TOOLS & EQUIPMENT
SITE PREPARATION & FOUNDATION
A – PREPARE THE SITE
The product must be positioned and fixed on a flat level surface.
CHOOSE YOUR FOUNDATION TYPE
As a foundation, we recommend using three material types: Concrete/ Pressure
treated wood / wood deck/ Paver blocks
- The size of the product displayed is for illustration purposes only and may not reflect the size of your product.
ANCHOR TO FOUNDATION
Please consult with an expert regarding which fasteners are suitable for other surface types.
SAFETY ADVICE
- It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps
- Always wear work gloves during panel sliding .
- Always wear shoes and safety goggles when working with extruded aluminium .
- If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice .
- Do not touch overhead power cables with the aluminium profiles
- Do not attempt to assemble the product in windy or wet conditions.
- Do not climb or stand on the roof
- Dispose of all plastic bags. Keep them out of reach of small children .
- Keep children away from the assembly area .
- Do not lean against or push the products during construction .
- Do not position your product in an area exposed to excessive winds.
- Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells
- Hot items such as recently used grills, blowtorches etc. must not be stored in the product
- Make sure there are no hidden pipes or cables in the ground before anchoring to foundation
- This product is designed to be used mainly as a greenhouse.
- LL Make sure to anchor the product directly to a solid foundation to increase the product’s stability and wind resistance in areas with severe weather conditi ons. Make sure that there are no obstructions between the assembly area and the final position of the product. The Canopia Anchoring kit is available for purchase separately.
CARE & MAINTENANCE
- When your product needs to be cleaned, use a soft cloth and rinse with cold clean water .
- DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels
- Clean the product once assembly is complete
BEFORE ASSEMBLY
- Selecting a site
- Choose your site carefully before beginning assembly
- Choose a sunny position away from overhanging trees.
- The product must be positioned and fixed on a flat level surface
- The product must be secured directly to a solid foundation
- This is a multi-part assembly best achieved by two people Allow at least half a day for the assembly process.
- Take all components & parts out of the packages. Sort the parts and check against the content parts list
- Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost
- Please note multi-sided profiles are used in this product As a result some holes in the profiles are not used during assembly
- Please review entire instructions before starting. Carry out the assembly steps in exact order.
- Please consult your local authorities if any permits are required prior to constructing the product
- Please ensure you have sufficient side space for inserting the roof panels during the assembly process.
IMPORTANT
- Firmly connect the product to a level surface immediately after completion of the assembly.
- Anchoring this product to the ground is essential to its stability and rigidity. It is required to complete this stage in order for your warranty to be valid.
- During assembly use a soft surface below the parts to avoid scratches and damages .
- We recommend checking for restrictions or covenants for building this product in your area.
- In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.
DURING ASSEMBLY
During assembly, you will encounter different icons for different products. Please see below for more information on:
References
- Contact Us Archive - Canopia
- Inspection Systems for the Electronics Industry – Viscom – Viscom
- Αρχική Σελίδα - Alpaco Domica
- Canopia United Kingdom - Celebrate Outdoor Living
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>