VAN RYSEL D500 Interactive Turbo Trainer Instruction Manual

June 9, 2024
VAN RYSEL

VAN-RYSEL-logo

VAN RYSEL D500 Interactive Turbo Trainer

VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-1

Failure to observe the following warnings may lead to an accident that could result in death or serious injury.

WARNING

  • Read all instructions carefully before using the home trainer.
  • Do not use the home trainer if it isn’t working properly
  • Before getting on the bike, make sure it’s properly installed (as horizontal as possible and not askew) and correctly attached to the home trainer.
  • Please consult your doctor before beginning or modifying any exercise programme.
  • Do not put your hands or objects near the moving parts of the home trainer
  • The home trainer may become warm to the touch when used for an extended period.
  • Do not attempt to disassemble the bike while the flywheel is in motion.
  • Keep children and pets away from the home trainer while in use.
  • Only use the home trainer on a stable, level surface with properly adjusted levelling feet
  • Prevent the home trainer from coming into contact with water.
  • Use only the power supply supplied with the home trainer
  • Make sure the cassette and bike are securely attached to the home trainer before each ride.Unplug the home trainer when not in use

SAFETY INSTRUCTION

  • MAX user weight 115 kg
  • The home trainer can only be used with bikes with a minimum wheel diameter of 26 inches (but exclude certain types of bikes such as children’s/teenagers’ bikes)
  • In hot weather, use the home trainer in a ventilated, cool place (avoid heatstroke)
  • Make sure your computer, tablet or smartphone is fixed or placed on a stable item and is not likely to fall during use of the home trainerIf in doubt, should you refer to this manual, the FAQs on the support site or the workshop?

AFTERCARE

  • Switch off then unplug the home trainer before cleaning it or carrying out any other maintenance procedure >> if it’s hot, maybe it’s advisable to let it cool down?
  • To avoid any imbalance or vibration when using the home trainer, do not drop it during assembly
  • Store the home trainer in a dry place at room temperature
  • Wipe down the trainer after each use. The home trainer should only be cleaned with a dry cloth and should not be exposed to cleaning solvents or abrasives
  • Keep the home trainer clean and free of debris
  • Regularly check if the nuts and bolts of the home trainer are tight.

BOX CONTENT

VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-3

ASSEMBLY

VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-4
VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-5
VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-6
VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-7
VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-8
VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-9
VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-10

LED INDICATION

VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-11

STORAGE & USE

VAN-RYSEL-D500-Interactive-Turbo-Trainer-fig-12

Main material : Plastic

FCC

  • This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
    1. This device may not cause interference.
    2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  USA : This device complies with part 15 of the FCC Rules.

  • Operation is subject to the following two conditions:
    1. This device may not cause harmful interference
    2. this device must accept any interference received, including interference that may cause undesired operation. – USA : This device complies with part 15 of the FCC Rules.
  • Operation is subject to the following two conditions:
    1. This device may not cause harmful interference
    2. this device must accept any interference received, including interference that may cause undesired operation.”

CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VAN RYSEL User Manuals

Related Manuals