ACOLETTY B08JGT29VF 4K 60fps 48 Megapixels Vlogging Camera User Manual

ACOLETTY B08JGT29VF 4K 60fps 48 Megapixels Vlogging Camera

Preface

Thank you for purchasing this digital video camera. Before use, please read this manual carefully. Keep this manual in a safe place for future reference.The latest information at the time of compiling this manual is used for reference for the content of this manual.
The screen displays, illustrations and other information adopted in this manual are to visually elaborate the operation of the video camera. Depending on different technology development and production batches, it may be slightly different from the digital cameras you actually use.
Disclaimer notice: Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, there is no guarantee that there will be no errors or omissions in this manual.

Safety Precautions

1. Do not disassemble or modify the product.
2. Please stop operating the camera immediately if there are smoke or unpleasant smell on any parts of the camera, otherwise, it may cause fire or electric shock. Turn off the camera immediately and remove camera’s battery or unplug power cord from an electrical outlet. Make sure the camera has stopped emitting smoke or unpleasant smell.
3.  Do not expose or immerse the camera to water or other liquids. This camera is not waterproof. Please dry with a soft cloth if the case is exposed to liquid or saltwater. Turn off camera immediately and remove camera’s battery or unplug the power cord from the electrical outlet if water or other materials immerse into the camera.
4. Do not trigger the flash in close to human or animal eyes. Your eyesight may be damaged when facing a strong light source if the distance is too close. Please pay special attention to keep more than 1 meter (39 inches) away from the baby.
5. Keep the camera and battery out of the reach of children.
6. Do not heat the battery or expose it to sources of ignition, otherwise, it may explode.

Appearance Description

Buttons and Indicators

Buttons Indicators| ****

Functions

---|---

POWER

| ****

1. Power on and off

2. It functions as confirmation in menus

3. When power is on, press it will turn on the infrared light/fill light, and then press it again will turn off

MODE| Switch the mode interfaces
MENU| Enter or exit the menus
UP| a.Upward

b.Long press it to open WIFI (shortcut key),and then press again to shut it off.

DOWN| ****

Downward

W/T| T : Zoom in (When selecting the mode, press it to move to the right) W : Zoom out (When selecting the mode, press it to move to the left)
PHOTO| Take photo
Video START/STOP| ****

Start or stop recording video

Indicator light (BUSY/ CHG)| BUSY: Working indicator light.

CHG: Charging indicator light(the indicator light will be on when connected with a charger.It will turn off when the power is full. )

Hot shoe| For the installation of the connector of external microphone or fill light
MIC| External microphone interface
HD| TV interface
USB| Data cable interface

Getting started
Battery installation/Charging batteries
This camera uses high capacity rechargeable external lithium battery. Please put the battery into the battery slot correctly according to the battery and battery compartment slot.
The following symbols indicate the current remaining battery power

When the battery logo is red, it means the battery needs to be charged. Please charge it in time, otherwise it may shut down automatically due to low battery.

1.  Charge with the camera, connect the power adapter and camera with the USB cable, and plug in the power to charge. When charging, the red light is always on, and when it is fully charged, the red light is off. (Tips: charging in the off state, the battery will fill faster)
2. Charge the battery with a standard external charger and put the battery directly into the charger.
3. Battery charging time (estimated) In the normal environment, it takes 3 hours to be fully charged.
4. Continuous working hours (estimated)

When [system] is set to 4K and all other settings are factory default settings, it can work for 1.5 hours.
When [system] is set to 1080p and other resolutions, and all other settings are factory default settings, it can work for 1.5 hours.

Note:
The battery is recommended to start charging in a temperature range of 10 °C to 30 °C. At a lower temperature, the battery may not be able to or need more time to be fully charged. When charging at a high temperature, it may shorten battery life.
The fully charged battery will naturally consume electricity. In order to ensure sufficient power, charging in advance is recommended. When the camera is not used for a long time, please charge the battery every 3 months. Then let the battery discharge to maintain the battery life.

Memory Card
This camera can use: SD card (SDHC card and SDXC card). It supports up to 256G.
As indicated aside from the card slot, insert the SD card into the card slot with the metal pins towards inside. Remove the card by pressing down.

1. SD card of Class 10 or higher is required.
2. Memory cards of SanDisk, Samsung, Panasonic are suggested to be used. Other memory cards may cause recording failure or data loss.

Recording Time of the Memory Card (Estimated)

The estimated recording time is just for reference and the specific time may be different depending on the memory card and battery condition.

Note: If there are documents not recorded by this camera or saved by PC in the memory card, the recording time may be reduced or data may be unable to record properly.
Format Memory Card
A memory card first used in this camera is recommended to be formatted, or failure, such as, inability to record may occur. When first using a memory card in this camera, the format window will pop up automatically. As shown in the figure:

You can also enter the system menu of this camera—sub-menu: Format, press OK button, enter the format window in the above figure to carry out formatting. You can also format the memory card on your computer.
Notes

• Turn off the power before replacing card.
• Insert card in the right direction.Do not insert the card too hard to damage the card or camera components.If the card is not inserted,please check whether the direction is right or not.
• Format the card when the card is first used or used in other video cameras.

Open Monitor

1. The camera will be turned on by opening the LCD monitor.
2. When the power is off, press the “POWER” button for 1 second and the camera will turn on.
3. Boot screen display(Notes：Boot screen mode defaults to the last set mode)

System Menu

1. Set date/time
   Press the MENU button, then press the MODE button to enter the system menu , then press the UP button or the DOWN button to move the cursor, select the time setting/date setting sub-menu, and press the OK button to enter the setting. After setting, press MODE to exit.

2. Language setting
   Press MENU (Menu button), then press MODE (Mode button) to enter the system menu, then press UP or DOWN button to move the cursor, select the language sub-menu, press OK button to enter the setting.

System menu setting directory

High/Middle/Low/Turn Off
Wi-Fi| Turn On/Turn Off (Press OK to switch)| Startup Music| Open/Close

Wi-Fi Information

| ****

Press OK to view Wi-Fi ID and password

| ****

Language

| Simplified Chinese/traditional Chinese/English/Japanese/Korean/Rus sian/German/French/Italian/Spanish/Po

rtuguese/Thai

Reset Wi-Fi

| ****

Confirm / Cancel

| ****

Date Set

| YYYY/MM/DD       MM/DD/YYYY

DD/MM/YYYY

Light Source

Frequency

| ****

Auto/50Hz/60Hz

| ****

Time Format

| ****

hour minute second

LED Indicator| Turn On/Turn Off (Press OK to switch)| Auto Power Off| Turn Off/3min/5min/10min
Auto Screen

Saver

| ****

Turn Off/30s/1min/2min

| ****

Format

| ****

(SD Card)Format/Cancel

Device Info| Product model and version number| Factory Reset| Confirm/Cancel

Record video/Take photo

Record video/take photo must select the mode.

Record video mode: Video, Slowly, Loop, Lapse Playback
Take photo mode: Photo, Auto, Burst, Timer

Mode selection: You can press the MODE button to enter the mode menu, press the UP/DOWN button (or W/T button), move the cursor left or right to select the mode, press the OK button to confirm the mode, then press the recording button to start recording, or press Photo button to start taking pictures.
After turn on, you can directly press the recording button to start recording, or take a photo with Photo button (Note: The recording/photo mode defaults to the last selected mode)

Video Mode

1. Current is the video mode
2. Current system date
3. Current system time
4. The memory card is installed in place
5. Current microphone is turned on
6. The current WIFI mode is turned on
7. Current remaining battery power
8. Zoom in/Zoom out
9. Mode menu button
10. Main menu button
11. Current memory card remaining recording time
12. Current recorded time
13. Current video resolution
14. Playback button
15. Exposure value
    Menu setting contents in video mode (In this mode, press MENU directly to set the corresponding menu)

60FPS/720P 30FPS
White Balance| Auto/Sunny/Cloudy/Incandescent/Fluorescence
Exposure Setting| -3/-2/-1/0/1/2/3
Metering Mode| Average Metering/Center Metering/Spot Metering/Matrix Metering
Sharpness| High/Middle/Low
Video Quality| High/Middle/Low
ISO| Auto/100/200/400/800/1600/3200/6400
Time Watermark| Turn On/Turn Off (Press OK to switch)
Record Audio| Turn On/Turn Off (Press OK to switch)

Video Pause
This camera supports video pause. During the recording, press the Photo button, the recording is stopped and press the Photo button again, the recording is continued. If pressing the Record button again, the recording will end.
Tips: The recorded long video will be saved in the memory card in sections, and the document name is 0000X—0000X.
Photo Mode

1. Current is the photo mode
2. Current system date
3. Current system time
4. The memory card is installed in place
5. Current remaining battery power
6. Zoom in/Zoom out
7. Mode menu button
8. Main menu button
9. Current memory remaining storage
10. Current stored quantity
11. Current video resolution
12. Playback button
13. Exposure value

Menu setting contents in photo mode

Sub-menu                                                      Menu content

Pixellnset| 48M/30M/24M/20M/12M/8M/5M/3M
White Balance| Auto/Sunny/Cloudy/Incandescent/Fluorescence
Exposure Setting| -3/-2/-1/0/1/2/3
Metering Mode| Average Metering/Center Metering/Spot Metering/Matrix Metering
Sharpness| High/Middle/Low
Long Exposure| Auto/2S/5S/10S/15S/20S/30S
ISO| Auto/100/200/400/800/1600/3200/6400
Time Watermark| Turn On/Turn Off (Press OK to switch)

Playback Mode

In this mode, you can view the videos and photos taken.

1. Mode when shooting
2. Current video / photo sequence location
3. Total number of videos and photos stored
4. Battery remaining capacity
5. Downward
6. delete
7. Current video or photo resolution
8. Back
9. Upward

If there is no memory card, or no file, a null value will be displayed when entering playback mode.

Delete Videos / Photos

Enter playback mode, find the video or photo you want to delete by scrolling up or down, and then click the screen delete button.

Power OFF
Long press the POWER button to turn off the video camera.
If you set the auto turn off-menu when the video camera is free ,it will turn off automatically without operation in more than 3 min/5min/10min, so to save power.

WIFI Function
Need to use WIFI function, first use the smartphone to scan the following QR code to download the app, or directly search XDV PRO in Google Play Store or Apple Store.

1. First turn on the camera, long press the UP button to quickly open the WIFI. After the WIFI is turned on, the camera will display the WIFI ID or password as shown below (you can also enter the system settings menu to open the wireless hotspot).
2. Open the settings on your phone or tablet. —— WLAN finds the camera WIFI ID, enters the WIFI password, and connects the phone to the camera.
3. Turn off the WIFI function: In the WIFI connection state, long press the UP button to cut off the WIFI signal source of the camera, and the camera returns to the normal state (you can also enter the system setting menu to turn off the wireless hotspot).

Remote Control

The remote control uses 2 AAA batteries and the remote control distance is 49 feet.

1. 1:Power key
2. Up key
3. Right key
4. Enter key
5. Camera
6. Playback key
7. Mode key
8. Infrared night vision light
9. Left key
10. Down key
11. Camera key
12. Menu key

Infrared light night vision function
When the ambient light brightness is insufficient, press the power (OK) button to turn on the night vision function when the camera is turned on. After turning on the infrared night vision function, the camera can use the recording videos and take photos normally. Press the Power (OK) button again to switch off the night vision light.
Note : the effect of turning on the infrared lamp is black and white. In addition, this function will increase the battery power consumption.

MIC INPUT
When an external microphone is needed, plug the external microphone into the MIC interface of video camera to record video or audio for better audio effects. The microphone interface is 1/4 inch.

HD OUTPUT
When the video and sound of the video camera are needed to output to the HD TV, insert the public port of the HD cable into the HD interface of the video camera, and connect the HD input port to the HD input interface of the HDTV. Please stop recording/playing videos before accessing/unplugging the HD cable. (switch TV signal into HD mode)

Connect to Computer
Connect the video camera to the USB port on the computer with the USB cable, insert the USB and the camera will automatically turn on, press UP and DOWN to select the Charging Mode or Mass Storage Mode or PC camera, then press OK to confirm entry.

1. Select to enter the charging mode, all functions of the camera can be used normally, this camera supports the function of recording while charging.

2. Select to enter the storage mode, a removable storage device will be added in the “My Computer” window, and the corresponding storage file in the memory card can be found in this mobile device.
   Note: Do not disconnect the USB connection while downloading files. Do not plug memory card when USB is connected so to avoid data loss.

3. Select the PC camera mode, the camera can be used as a webcam. After turning on the webcam, you can press the W/T button to adjust the digital focal length to bring the distance to an appropriate distance.

Troubleshooting

Camera cannot start after battery is installed

| The battery is low, please replace it with a new one.
Battery pack not removed.
The battery is not installed in place; please confirm that the battery is installed correctly.

Unable to charge

| If the charging indicator light is flashing, the battery is not installed in place or in poor contact. Please reinstall the battery until the indicator light is on for a long time (the indicator light will go out when the battery is full).
If the charging indicator is not on, the charger is not plugged in. Please check whether the charger is connected normally.

Remote control does not work

| Check whether the remote control battery is dead.
The remote control can’t start the camera remotely. This is not a fault

HD cable connected TV cannot be connected

| Check whether the TV source is set to HD mode.
Check if the HD wire is connected correctly.

Unable to connect to PC

| Please check whether the USB data cable is connected correctly.
Please check whether the USB interface of computer is working properly.
Please check the compatibility of the computer system.

Blurred shooting effect

| The best distance for shooting is more than 2m.
Check whether the camera shake when shooting.

Camera Cleaning and Maintenance

1. If you do not use the camera for a long time, take out the camera battery and place it in a dust-free, dry environment with a temperature no higher than 30 ℃.
2. In order to extend the service life of the battery, please discharge it completely before storage.
3. Please fully discharge the battery at least once every 3 months after it has been fully charged.
4. If there is dust or dirt on the lens or screen, gently wipe it with a clean, soft lens cleaning cloth.
5. As this machine is a precision instrument, please do not drop it or suffer from strong impact or vibration.

Additional Notes

1. Do not insert any object into the slot except the memory card.
2. After the power is turned on, the camera may show an unstable image about for a few seconds, but this is not a fault.
3. Due to the optical properties of the lens, there may be color dispersion (magnification of chromatic aberration) at the edges of the image. This is not a camera fault.
4. It is normal for the memory card to get hot after a long period of use.
5. It is normal for the camera’s screen to heat up after a long period of use.
6. The camera has no autofocus function, and the best distance for shooting is more than 2 meters.
7. when the camera is recording or taking pictures, please do not press multiple buttons of the camera quickly and repeatedly. Under normal circumstances, the camera will display the waiting icon

Specification

Image sensor| cmos13 million megapixel sensor, 48 million megapixel

maximum

| HDMI interface| Support
---|---|---|---
Memory Card| SD Card（4GB–256GB）| External

microphone

| Support
Video Format| MP4| WIFI| Support
Video

Resolution

| 4K 30FPS/2.7K 30FPS/1080P 60FPS/1080P 30FPS/720P

120FPS/720P 60FPS/720P 30FPS

| Fill light| IR night vision
Image Format| JPEG| ISO| Auto/100/200/400/800/1600/3200/6400
Picture

Resolution

| 48M/30M/24M/20M/12M/8M/5M/3M| White Balance| Auto/Sunny/Cloudy/Incandescent/Fluorescence
Digital zoom| 18X| Exposure

Setting

| -3.0 ~ +3.0
Lens| f=7.36mm| Power supply| Lithium rechargeable battery
Aperture| F/3.2| Operating

system requirements

| Windows 98 / 98SE / ME / 2000/ XP / Vista / win7 / win10 / Mac

Language

| Simplified Chinese/traditional

Chinese/English/Japanese/Korean/Russian/German/Frenc h/Italian/Spanish/Portuguese/Thai

| Dimension| 126mm ×58mm × 57 mm
USB interface| 2.0| Net weight| 300g

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>