InCarTec 39-IVE-02 Iveco Daily CANbus Steering Wheel Control Interface User Manual
- June 12, 2024
- InCarTec
Table of Contents
InCarTec 39-IVE-02 Iveco Daily CANbus Steering Wheel Control Interface
Iveco Daily CANbus steering wheel control interface
Compatible vehicles
- Iveco Daily VI (2014 >)
- Iveco Daily 7 (2019 >)
ONLY MODELS WITH DELPHI DAB RADIO Fiat Ducato (2021 >) ONLY VEHICLES WITH CAN STEERING WHEEL CONTROLS AND ISO CONNECTORS
Set the switches
The switches on the interface need to be set according to the brand of radio and vehicle model. Open the black box and set the switches. See the tables below and right for the switch settings. Switches 1-4 relate to the brand of head unit and switches 5-8 are vehicle options. Try setting option 1 first, check that if the steering control are operating correctly and that the odometer is not flashing, if this is the case, try other settings.
Some cars may have a flashing odometer after installation, in this instance, try the other switch options for that type of car group.
Switch | 1 | 2 | 3 | 4 |
---|---|---|---|---|
Alpine | Off | On | Off | Off |
Kenwood | On | On | Off | Off |
JVC | Off | Off | On | Off |
Clarion | Off | On | On | Off |
Zenec | Off | Off | Off | On |
Sony | On | Off | On | On |
Pioneer | Off | On | On | On |
Chinese/learning | On | Off | Off | On |
5 | 6 | 7 | 8 | Car model |
--- | --- | --- | --- | --- |
On | Off | Off | Off | Iveco Daily VI & Fiat Ducato |
Delphi DAB Radio
Set up the patch lead
- Pioneer and Sony
- Pin 1 black (base)
- Pin 2 red (middle)
- Pin 3 not connected
- Pin 4 white (tip)
Alpine, Clarion and JVC
- Pin 1 black (base)
- Pin 2 white (tip)
- Pin 3 not connected
- Pin 4 red (middle)
JVC, Kenwood and Zenec
- Pin 1 not connected
- Pin 2 blue (single wire)
- Pin 3 not connected
- Pin 4 not connected
Chinese/Learning
- Pin 1 blue (single wire)
- Pin 2 not connected
- Pin 3 not connected
- Pin 4 blue (single wire)
The 4 pin patch lead connector diagrams above are viewed from the wire entry side of the connector.
Green- CAN active Yellow- Ignition output active
When connected the green light will indicate that the interface is recognising the vehicles CANbus, and the yellow light will indicate the interface is giving out an ignition power supply. If the green light is not on check the CANbus connections and switch settings.
Steering Wheel Control Functions
Setting time and date (If required)
Press mute and track+ at the same time. The radio will turn off to show time setting mode is active. Use volume + and – to set time and date, use track + and – to move through
OPTIONAL FLY LEAD CONNECTIONS
- Pink— Speed Pulse Output
- Purple/ White— Reverse Output
- Green— Handbrake Output
- NOTE: The loose purple lead with a terminal can be insulated and ignored in this application.
- NOTE: Not all vehicles require the red mini-ISO plug to be connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>