AO Smith AO-MF-ADV Advanced Direct Connect Water Filter Owner’s Manual

June 12, 2024
AO Smith

AO Smith logo ADVANCED DIRECT CONNECT WATER FILTER

AO Smith AO-MF ADV Advanced Direct Connect Water
Filter AO-MF-ADV
Owner’s Manual

AO-MF-ADV Advanced Direct Connect Water Filter

IF YOU NEED HELP OR HAVE A QUESTION, WE’VE GOT YOU COVERED. GIVE US A CALL AT 877.333.7108 PLEASE DO NOT RETURN TO THE STORE.
Congratulations on your new purchase. This water filter has been engineered to provide you with optimally clean water. The Advanced Direct Connect Water Filter features Claryum® filtration technology that reduces harmful contaminants and bad taste  and odor while retaining beneficial minerals. Whatever your water needs — from hydration to cooking and more — A. O. Smith has you covered.
Keep this owner’s manual to reference installation, troubleshooting, and filter replacement information.
If  you need help or have a question, give us a call at 877.333.7108.

AO Smith AO-MF ADV Advanced Direct Connect Water Filter - Icon
1| The recommended replacement
frequency for the AO-MF-ADV is every
6 months or every 784 gallons of use.
---|---
| Use only certified, genuine A. O. Smith replacement filters for continued contaminant  removal and system performance.
Visit AOSmithAtLowes.com to find replacements or visit your local Lowe’s store.

Scan to view the AO-MF-ADV installation video.AO Smith AO-MF ADV Advanced
Direct Connect Water Filter - Qr Code 2https://qr1.be/L52A

BOX CONTENTS

AO Smith AO-MF ADV Advanced Direct Connect Water Filter - BOX
CONTENTS

Please read entire manual and ensure all parts listed are present before installation.

If any part is missing or damaged let us know by calling 877.333.7108.
Do not attempt to install the filter.

Tools recommended for installation:

  • Variable speed drill w/ 7/32″ bit
  • Adjustable wrench
  • Measuring tape
  • Level
  • Phillips head screwdriver
  • Pencil

Note: We recommend using a professional if pipe cutting is required.

INSTALLATION GUIDE

Installation Options
1. Vertical
2. Horizontal wall mount
3. Horizontal floor mount (mount the system to the  floor of your cabinet)|
---|---

STEP 1 Prepare for Installation

  1. Lightly place advanced system head onto filter cartridge (do not fully attach) and determine a suitable area under the sink to mount the system.

  2. Locate a suitable area under the sink to mount the system. Three (3) inches of clearance from the base of the filter cartridgeis needed for easy replacement. The advancedsystem head must be installed less than three(3) feet from the COLD-water  inlet valve.

Note: Remove advanced system head before proceeding to step 3.

STEP 2 Mount System Head (cont. on page 3)

  1. Place system head in desired mounting location and use a pencil to mark the top left mounting hole. Referencing the mounting hole chart, use a level and measuring tape to mark the remaining holes for the system head and mounting brackets.
    ** STEP 3 Mount System Head (cont. from page 2)**

  2. After penciling in the mounting placement, use a 7/32″ drill bit to drill holes for plastic anchors. Carefully tap anchors into the drilled hole with a hammer.

  3. Using a Phillips head screwdriver, mount the system head and mounting brackets using the provided screws. Ensure that the bracket marked P/N-2 is closest to the system head.
    AO Smith AO-MF ADV Advanced Direct Connect Water Filter - system
head

STEP 4 Insert Filter Cartridge
Fully connect filter cartridge to system head by placing it into the mounting brackets, then pushing up and turning the cartridge to the right until it locks into place.

STEP 5 Turn Off and Disconnect Water Line

Turn off COLD water supply (1). With an adjustable wrench, disconnect water line (2). Attach dual port adapter to shutoff valve and re-attach COLD water line to the dual port adapter (3).

AO Smith AO-MF ADV Advanced Direct Connect Water Filter - Water
Line

STEP 6 Connect Tubing

  1. Connect 3/8″ tubing to the bottom port of the dual adapter. Run the opposite end of the tubing to the left side of the system head and cut to length.
  2. Using the second piece of 3/8″ tubing, connect one end to the top of the dual port adapter and run it to the right side of the system head and cut to length.
  3. Connect tubing at all points. Push the tubing in until it stops. Use 3/8″ quick connect elbow if necessary.

STEP 7 Turn on Cold Water

Turn on COLD water to the kitchen faucet (1). With the faucet on, slowly open the COLD water shutoff valve (2).

STEP 8 Flush System
Leave water running to flush system for 15 minutes or until water is clear of carbon fines.
While the system is flushing, check for leaks. Once system is flushed, turn off kitchen faucet.
Note: Do not drink flushed water.

CARE & SAFEGUARDS

Care
To clean your filter system, wipe down the exterior with a damp cloth.
NOTICE
Safeguards

  • If you experience a hose connection leak, disconnect and re-set the hose.
  • Do not install this system where the line pressure may exceed 125 psi. The operating pressure range for this system is between 10-125 psi.
  • Install on COLD water lines only (35°F – 100°F)
  • Use caution when installing the system head on a cabinet wall that backs up to a dishwasher. Screws may exceed cabinet width.
  • It is recommended that your system be installed inside and out of direct sunlight. The system must be protected from both direct sunlight and freezing temperatures.
  • System and installation shall comply with applicable state and local laws.
  • Do not use with water that is microbiologically unsafe or of unknown water quality without adequate disinfection before or after the system.
  • Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

PERFORMANCE & CERTIFICATIONS

Models| Replacement| Rated capacity| Operating temp. range| Rated flow
---|---|---|---|---
AO-MF-ADV| AO-MF-ADV-R| 784 gallons
2,967 liters| 35 – 100ºF
1.66 – 37.78ºC| 1.5 gpm
5.67 lpm
Manufactured by: A. O. Smith Corporation   11270 W Park Pl #170, Milwaukee, WI 53224    |    877.333.7108

System certified by IAPMO R&T to NSF/ANSI Standards 42, 53, and 401 for the reduction of the claims specified on the
Performance Data Sheet and at www.IAPMO.org.

For the full list of contaminants filtered, scan to view the AO-MF-ADV Performance Data Sheet.

https://qr1.be/FODP

LIMITED WARRANTY 1 YEAR

Who is covered:
A. O. Smith and its suppliers, (herein collectively referred to as “Manufacturer”) warrants to the original owner who purchased and installed the system (hereinafter “Owner”).

What is covered:
This Warranty covers defects in materials or workmanship during the limited Warranty period of your of your A. O. Smith Water Filtration System including sub-components purchased with original system (may or may not include faucet and fittings), except as provided below. The water filter is warranted only when it is installed, operated and maintained in accordance with the instructions accompanying the water filter found on AOSmithAtLowes.com. A water filter should be installed in such a manner that, if the system or any connection thereto should leak, the resulting flow of water will not cause damage to the area in which it is installed. For detailed instructions read the manual accompanying the water filter and review drawings in the manual.

For how long:
This Warranty runs for 12 months (365 days) from the date of purchase by a consumer (hereinafter “Warranty Period”). No Warranty coverage will be provided if the claimant is unable to provide proof of purchase from an authorized A. O. Smith reseller. Estimated lifespan of products is for information only and is based on usage approximations. Water conditions and use rates may limit the functional lifespan of your filter. This Limited Warranty does not extend to the full estimated life span of the system.

What A. O. Smith will do:

  1. If necessary, the Manufacturer will provide a replacement that fulfills the remaining estimated lifespan/capacity of your original purchase and send it to you with installation instructions. If industry standards, product improvements or product obsolescence prohibit Manufacturer from furnishing an identical model replacement water filter under this Warranty, the Owner will be furnished with a new water filter of comparable remaining capacity and functionality; however, the Owner will be charged for the additional value of the item(s) which Manufacturer has incorporated in the replacement water filter. The Warranty period for any replacement will run for the balance of the original 365 days.
  2.  Component Part – If any component part proves to Manufacturer’s satisfaction to be defective in material or workmanship within the Warranty period listed on the data plate label, the Manufacturer will furnish the Owner with a replacement for the defective part(s).
  3. Return of Defective Water Filter and Component Parts – Manufacturer reserves the right to examine the alleged defect in the water filter or component part(s), and it will be the Owner’s obligation to return the water filter and/or component part(s) to the Manufacturer at the Manufacturer’s request.
    a. When returning a water filter, it must include all component parts.
    b. When returning component part(s), they must be individually tagged and identified with the water filter’s model number, date of purchase, and date of installation.

What is not covered:

  1. This Warranty does not cover filter cartridges and any systems that were not installed in compliance with the instructions or that have been abused or operated incorrectly.

  2. This Warranty applies only to products purchased from authorized
    A. O. Smith resellers.

  3. The Limited Warranty stated herein is in lieu of any and all warranties, express or implied (whether written or oral), including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

  4. Manufacturer shall not be liable for any incidental, consequential, special, punitive, or contingent damages or expenses, arising, directly or indirectly, from any defect in the water filter or the use of the water filter, including but not limited to water damage.

  5. Manufacturer shall not be liable for any water damage arising, directly or indirectly, from any defect in the water filter or component part(s) or from its use.

  6. Manufacturer shall not be liable for any damage or product failures caused by any of the following:
    • The water filter or any of its component parts have been subject to misuse, alteration, neglect or accident.
    • The water filter has not been installed in accordance with the applicable local plumbing and/or building code(s) and/or regulations or in their absence.
    • The water filter is not installed, operated and maintained in accordance with the printed Manufacturer’s instructions, including if the water filter has any additional aftermarket equipment introduced into the sealed system not approved by the manufacturer.
    • The water filter is exposed to highly corrosive conditions.
    • The water filter is not continuously supplied with potable water.
    • The water filter is not operated within the factory calibrated temperature limits.
    • The water filter is installed in direct sunlight or exposed to freezing temperatures.
    • The water filter or any of its component parts fail due to sediment build- up.
    • Clogging due to purchaser’s failure to replace the filter cartridges.
    • Damage caused by fire, flood or acts of God.
    • Damage caused by over-pressurization in the water line.

  7. Manufacturer shall not be liable for any claims related to excessive noise, smell, or taste of water.

  8. This Warranty does not cover damage caused by the use of parts that are not genuine A. O. Smith parts. This includes, but is not limited to replacement filters, faucets, and/or diverter valves.

  9. Except when specifically prohibited by the applicable state law, the Owner, and not the Manufacturer, shall be liable for and shall pay for all charges for labor or other expenses incurred in the removal, repair or replacement of the water filter or any component part(s) claimed to be defective or any expense incurred to remedy any defect in the product. Such charges may include, but are not necessarily limited to:
    a. All freight, shipping, handling and delivery costs of forwarding a new water filter or replacement part(s) to the owner.
    b. All costs necessary or incidental in removing the defective water filter or component part(s) and installing a new water filter or component part(s).
    c. Any material required to complete, and/or permits required for, installation of a new water filter or replacement part(s), and d. All costs necessary or incidental in returning the defective water filter or component part(s) to a location designated by the Manufacturer.

How to get service:
To receive service under this Warranty, you must contact A. O. Smith at 1-877-333-7108 within the Warranty Period to describe the problem to a customer service representative who will verify that the product is under Warranty and determine whether a part or the system will be replaced and whether you must send back the unit. You will be required to provide  proof of purchase from an authorized A. O. Smith reseller and proof of proper installation.

Warranty registration:
Warranty registration is not required for coverage under the A. O. Smith Limited Warranty. If you purchased from a retailer or an authorized reseller, please complete the online Warranty registration form at www.aosmithatlowes.com/register. Proof of purchase from an A. O. Smith authorized dealer is required. Once registered online, we will have a record of your purchase.

How state law applies:
This Warranty gives you specific rights and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Love it?
We welcome your rating & review.
Visit AOSmithatLowes.com/reviews

Need help?
Save a trip and give us a call instead
at 877.333.7108
Tell us what’s going on. We’ll do our best to help solve the problem and improve the product.

System certified by IAPMO R&T to NSF/ANSI Standards 42, 53, and 401 for the reduction of the claims specified on the Performance Data Sheet and at www.IAPMO.org.

This filter system is designed and tested for use with genuine A. O. Smith parts, including replacement filters, faucet and all hardware. Use of parts from other manufacturers may result in loss of contaminant reduction performance, system damage or failure. Use of parts from other manufacturers will also void your warranty. Please visit aosmithatlowes.com for replacement parts. Installation must comply with state and local ordinances.
A. O. Smith is not liable for consequential or incidental damages due to improper installation.

AO Smith logoA. O. Smith Corporation 11270 W Park Pl #170, Milwaukee, WI 53224 | 877.333.7108
AO-US-MF-ADV_install_Sept2022

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals