ACEFAST D17 Fast Wireless Charger Car Mount Holder User Guide

ACEFAST D17 Fast Wireless Charger Car Mount Holder

Specifications

• Model: D17
• Input: 5V2A, 9V2A, 12V2A
• Wireless Output: 5W / 7.5W / 10W / 15W (Max)
• Total Output: 15W (Max)
• Weight: About 190g / 6.70oz
• Size: Charging cable USB-A to USB-C, length 1m
• Compatible: 4.5-7.2 phones (width 60-90mm)
• LED Light Display:
  • Power-on indicator – Steady light
  • Standby indicator – Steady light
  • Charging indicator – Breathing light
  • Full charge indicator – Breathing light
  • Foreign object indicator – Blinking light for 5 seconds and then off
  • Voltage abnormality indicator – Indicator light toggle
  • Light off – Long press the side button for 3 seconds to turn off/turn on the indicator light

Product Usage Instructions

1. Loosen the nut behind the back clip and insert the ball joint, then tighten the nut.
2. Fix the holder at the air vent. Turn the knob counterclockwise to open the hook clamp, and turn the knob clockwise to lock the hook clamp.
3. The holder needs to be connected to the data cable for power supply.
4. Press the left/right side button to open the arm clamp.
5. Place the phone on the holder, and the arm clamp will automatically lock and charge the phone.
6. Press the left/right side button to automatically open the arm clamp and remove the phone.

Precautions
Do not disassemble or modify this product by yourself. Do not place this product in a humid environment. Please do not charge near a heat source. Do not allow water or other liquids to flow into the product, otherwise it will cause damage to the product. Do not install this product in the area where the airbag is located. Do not drop. Do not scratch the surface of this product with sharp objects to avoid surface damage.

FAQ

• Q: What should I do if the charging indicator does not light up?
  A: Make sure the holder is properly connected to the data cable for power supply and that your phone is correctly placed on the holder.

• Q: Can I use this wireless charging holder with any phone model?
  A: The holder is compatible with phones ranging from 4.5 to 7.2 inches in width (60-90mm).

• Q: How do I turn off the LED light display?
  A: Long press the side button for 3 seconds to turn off or turn on the indicator light.

• Q: Is it safe to charge my phone with this holder?
  A: Yes, as long as you follow the provided precautions and usage instructions, it is safe to charge your phone with this holder.

Quick Start Guide
Car wireless charging holder D17

Product picture

• Thank you for purchasing the product.
• Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Operating Instructions

1. Loosen the nut behind the back clip and insert the ball joint, then tighten the nut.
2. Fix the holder at the air vent. Turn the knob counterclockwise to open the hook clamp, and turn the knob clockwise to lock the hook clamp.
3. The holder needs to be connected to the data cable for power supply.
4. Press the left/right side button to open the arm clamp.
5. Place the phone on the holder, and the arm clamp will automatically lock and charge the phone.
6. Press the left/right side button to automatically open the arm clamp and remove the phone.

Specifications

Compatible: 4.5”-7.2” phones (width 60-90mm)

LED light display

off/turn on the indicator light

Precautions

• Do not disassemble or modify this product by yourself.
• Do not place this product in a humid environment.
• Please do not charge near a heat source.
• Do not allow water or other liquids to flow into the product, otherwise it will cause damage to the product.
• Do not install this product in the area where the airbag is located.
• Do not drop.
• Do not scratch the surface of this product with sharp objects to avoid surface damage.

Warranty & Customer Support

• For questions, support, or warranty claims, contact us at the mail below that corresponds with your region. Please include your order number and product mode number.
• Amazon US orders: support1@acefast.com
• Amazon EU orders: support2@acefast.com
• Amazon UK orders: support3@acefast.com
• Amazon CA orders: support4@acefast.com
• Amazon JP orders: support5@acefast.com
• Other region orders: support6@acefast.com
• *Please note, ACEFAST can provide after sales service for products purchased from any official ACEFAST store. If you have purchased from local seller, you can also contact them directly for service or warranty issues.

NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Shenzhen Houshuxia Technology Co., LTD

• www.acefast.com | support@acefast.com
• Rm203, 2nd Floor, Building C, Youth Pioneer Park, Jianshe East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, P. R. China Shenzhen, 518000, China

References

• ACEFAST - High End Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>