ADVENTURE FORCE G6D31HN Stranger Things Pizza Van Battery Owner’s Manual

June 13, 2024
ADVENTURE FORCE

Owner’s Manual

G6D31HN Stranger Things Pizza Van Battery


Please read and understand all precautions prior to use.
USA & Caneda
30-Day Limited Warranty
New Bright industries warrants to the original purchaser that this product will be free of defects in materiais and workmanghip for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse.
Should your item have a defect covered under this warranty, first call the toll free number listed below. Most probleme can be resolved in this manner. if necessary, you will be lesued a Retum Authorization number (RA) and instructions on how fo obtain a Product Return Form. The Product Retum Form is to be used when retuming @ product fo us (postage pre-paid and ineured by the coneumer). ;
When retuming a defective product, please package the product, the Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product le returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location).
New Bright industries’ llabiity for defects in materials and workmanship under this warranty shall be limited to repak or replacement at our sole diecrétion. In no event shail we be responsible for Incidental, consequential or contingent damages (except in those states that do not allow this exciusion or limitation).

TRANSMITTER BATTERY INSTALLATION

  1. To open battery compartment cover on transmitter, slide in the direction indicated by the arrow.

  2. Insert 2 “AA” size batteries.
    Make sure the positive (+) and negative (—) markings on the batteries match up to the ones ineide the Battery Compartment.

  3. Repiace the Battery Compartment Cover making certain that the Compartment tab has “snapped” into the locked position.

For Best Resuits:

  1. Do not mix old and new batteries.
  2. Do not mix alkaline, standard or rechargeabie batteries.
  3. Use alkaline batteries only.

TRANSMITTER FUNCTIONS & HOW TO DRIVE

This transmitter is equipped with 2.4GHz technology which aliows up to 6 vehicies to be used at the same time.
To sync transmitter and vehicie, follow these steps:

  1. Install batteries In Transmitter.
  2. Turn on Vehicle.

Once the batteries are installed and the vehicie is tumed on, the Tranemitter will sync automatically with the vehicle.

VEHICLE FUNCTIONS

  • if vehicle pulls to the left or night dunrg forward driving the Wheel Alignment may need to be adjusted. The Wheel Alignment Dial is located on bottom of chassis between the front wheels.

CHARGING INSTRUCTIONS

Operation:

  1. Locate the ON/OFF switch and USB cord on the under-side of the vehicle.
  2. Tum the ON/OFF switch to the “OFF” position.
  3.  Open Storage Compartment cover.
  4.  Remove USS cable from the Storage Compartment. (Use care when extending cord as It is attached to ineide intemal battery). Cord can be plugged into any 5V DC computer or 5V DC USB outlet adapter (not included).
  5. While charging, the LED under the vehicle will be on. Onoe fully charged the LED will turn off. Charging is completed in approximately 1 hour. Retum cord and secure storage lid before operating the vehicie.

TROUBLE SHOOTING & SUPPORT

Problem – Vehide does not move or moves slowly.

  • Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position.
  • Are the (+) and (—) markings on the alkaline batteries in the same position as the (+) and (-) markings in the

Transmitter Battery Compartment?

  • Has the internal battery in the vehide been charged?
  • Are the metal contact tabs touching, rusty or dirty in the transmitter?
  • Make certain that the vehicle ON/OFF switch is in the “ON” position.

Problem – Vehide moves by itself or exhibits reduced range from the transmitter.

  • Make certain there is no outside radio interference in your area. The best way to test this is to take the vehide
    as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur.

Always remove Batteries from transmitter when not in use.
Do not dispose batteries in fire. Leakage, explosion and personal injury may occur.
Do not attempt jumps or tricks with this vehicle.
Do not attempt to remove intemal battery.
Do not use included USB cord for anything other than its intended purpose.
Always keep USB cord stored when not in use.
Adult supervision recommended.

PROPER USE, PRECAUTIONS & CARE

F.C.C. CAUTION:
Changes or modifications not expressly approved by the party responeible for compliance could void the user’s authority to operate the equipment.
This device compliee with Part 15 of the FCC Rules. Operation le subject to the following two conditions:

  1. this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
    NOTE :
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonabie protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or televieion reception, which can be determined by tuming the equipment off and on, the user le encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circult different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for heip.

FCC CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). 4 ® Operation is subject to the following two conditions:

  1. This device may not cause JN interference; and
  2. This device must accept any interference, including interference that g may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirement.

Velid only In the USA & Canada.
Contact New Bright Industries Customer Service Toll Free at:
1-877-NBL-TOYS
(1-877-624-8667)
Monday through Friday, 8:00 AM to 5:00 PM Eastem Time
U.S. Toy Sales and Marketing Co. Inc.
30260 Oak Creek Drive — 2nd Floor
Whom MI 48383
. 1-877-624-8697
https://www.newbright.com/
REF-U6302 JN066-23

Documents / Resources

| ADVENTURE FORCE G6D31HN Stranger Things Pizza Van Battery [pdf] Owner's Manual
G6D31HN Stranger Things Pizza Van Battery, G6D31HN, Stranger Things Pizza Van Battery, Things Pizza Van Battery, Pizza Van Battery, Van Battery, Battery
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals