ONE FOR ALL URC1280 Universal Remote Control Contour 8 Device Instruction Manual

ONE FOR ALL URC1280 Universal Remote Control Contour 8 Device

Product Information:

The Universal Remote Control Contour 8 Device is a versatile remote control that can be used to control various devices. It is compatible with different types of televisions including HDTV, LCD, LED, Plasma, and Projector. It can also control video recorders, DVD players, Blu-ray players, DVD home cinema systems, digital TV receivers, satellite receivers, set-top boxes, IPTV devices, and more. Additionally, it can control audio receivers, MP3 players, and other audio accessories. The remote control requires AAA alkaline batteries for operation.

Product Usage Instructions:

Code Set up

(Example: To set up the ONE FOR ALL REMOTE for your television)

1. Find the four-digit device code for your device (e.g. Aiwa television) in the Code list. Codes are listed by device type and brand name. The most popular code is listed first. If your brand is not listed, try the Code Search method.
2. Select the device key (e.g. TV key) corresponding to the device you wish to control (e.g. television).
3. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once thentwice).
4. Enter your four-digit device code using the number keys (e.g. TV – Aiwa code 4542). The red LED lights up twice.
5. Aim the Universal Remote Control at your device and press POWER. If your device switches off, the remote control is ready to operate your device. If it does not switch off, try the next code listed for your brand.
6. If none of the codes listed for your brand work, try the Code Search method.
7. To set up the code for another device, follow the instructions above but press the appropriate device key instead of TV during step 2.

Code Search

1. Switch on your television (not on standby).
2. Select the device key (e.g. TV key) corresponding to the device you wish to control (e.g. television).
3. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
4. Press 9 9 1. The red LED will blink twice.
5. Next, press POWER.
6. Aim the Universal Remote Control at your television. Now press CH+ over and over, scanning through all the codes contained in the memory of the remote control.
7. As soon as your television turns off, press the SETUP key to store the code

Learning (copy)

Your One For All remote control can learn any function from any other working remote control. To do this, firstly make sure you have all your original remote controls to hand, and that they have working batteries in. To learn functions, the original remote should be approximately 3cm from the OFA remote, pointing towards it as shown below:

1. Select the corresponding device e.g. TV
2. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
3. Press 9 7 5
4. Press and release the key you want to learn a function onto (for example the TV Power key) – The red LED will blink continuously.
5. Press and release the corresponding key on the original remote, for example Power.
6. The red LED will blink twice to indicate the key has been learned correctly.
7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple remotes, but only one function per key.
8. When you learned all the functions you require, press and hold the SETUP key until the red LED blinks twice.
9. If the red LED shows one long blink at step 6, the function was not learned correctly, please try again from step 4.
10. If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 1.

How to delete a learned function to obtain the original function?

1. Select the corresponding device mode (e.g. TV).
2. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
3. Press 9 7 6.
4. Press the key to be deleted (e.g. red key) twice.

Volume Lock

This feature gives you the possibility to set the Volume (VOL+, VOL- and Mute) to always control a certain device (e.g. tv) independent of which device mode key (SAT, DVD, VCR, DVB-T, AMP, HI-FI or MP3) is selected.
In this example we will set Volume Control (VOL+, VOL- and Mute) to “tv volume”:

1. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
2. Press 9 9 3.
3. Then press the TV key and the red light will blink twice.

Now you have set the Volume Control to “tv volume”. The VOL+, VOL- and Mute keys will always control “tv volume” independent which device mode key (TV, SAT, DVD, VCR, DVB-T, AMP, HI-FI or MP3) is selected.
How to deactivate Volume Control

1. Select the device key you wish to deactivate from Volume Control (e.g. HI-FI).
2. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
3. Press 9 9 3.
4. Press the VOL(+) key and the red LED will blink four times.

References

• esim.tv - This website is for sale! - esim Resources and Information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>