ZEBRONICS ZEB-Pixaplay 13 LED Projector User Manual
- June 12, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-Pixaplay 13 LED Projector
Product Information:
| Screen size | 89-508cm |
|---|---|
| Native Resolution | 1024 x 600P |
| Max. Supported Resolution | 1920 x 1080P (Max) |
| Display Technology | LED |
| Lifespan | 30,000H |
| Brightness | 2000 lumens |
| Contrast ratio | 1000:1 |
| Projection Distance | 1.1m – 6m |
| Port Interface | AV IN, AUX OUT, USB, HDMI |
| Video file format | AVI, MP4, MPG, MPEG1, MPEG2, MKV, WMV, VOB, MOV, FLV, |
H.264,
HEVC, DIVX
Input Voltage| DC 19V 2.5A
Product Dimension (W x D x H)| 18 x 13 x 6.5 cm
Net. weight| 602g
Package Contents:
- Projector: 1 U
- Remote Control: 1 U
- Power Adapter: 1 U
- AV cable: 1 U
- HDMI Cable: 1 U
- QR Code Guide: 1 U
- Cotton Swab set: 1 U
Product Usage Instructions:
Setting Up the Projector:
-
Connect the power adapter to the projector and turn it ON.
You’ll see a blue LED near the power button indicating it is on. -
Before turning ON, place the projector on a flat surface for proper projection.
-
Press the power button on the projector or use the remote control to turn it on.
-
Align the projector as shown in the image below to ensure proper projection.
Focus Adjustment:
Once the projector turns ON and gets loaded, you can adjust the focus lens manually. Refer to the image below for guidance.
USB Connections:
Connect a USB drive with content to the projector. Select Media and the
content in the USB drive should be present inside the media
(Images/Videos/Music).
HDMI Interface:
Connect an HDMI cable to the projector and select the specific signal source
as the input. The content played from the source will be streamed on the
projector.
AV Interface:
Connect an AV cable to the projector and select the specific signal source as
the input. The content played from the source will be streamed on the
projector.
Audio Interface:
Once an audio device (headphone/speakers) is connected to the projector, it will automatically detect it as the output device and start streaming audio from it.
Projector Distance & Size:
Note: Because the optical device has about 3% error, the above data is
for reference only.
Please install the projector according to the actual measurement.For any
further assistance, please visit our website
www.zebronics.com.
ISO 9001:2015 Certified Company
Dear Customer,
Thank you for purchasing the ZEB-Pixaplay 13 LED Projector. Please read the
user manual carefully before usage & save it for future reference.
Note :
- To provide a stable power supply, kindly use the cable provided with the product and connect to a DC 19V 2.5A power source.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
- Avoid looking directly at the projector lens while it is active.
- Make sure that the projector’s air vents are not blocked while in use. The device must be kept in a well insulated surrounding for proper functioning.
- It is recommended to power OFF the projector after a continuous usage of 6 hours.
- Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
- In case of enquiry regarding the projector, email us at enquiry@zebronics.com or contact us at 044 4000 0004.
Features :
- Home Theater Projectors for Movies, TV & Gaming etc.
- Projector comes with VGA, AV IN, AUX OUT, USB, HDMI
- Built in Speaker
- Remote Control
Product Description
*NOTE :
- To avoid power shortage, please do not mixed use the old and new battery.
- To avoid battery leakage corrosion, if do not use remote control for a long time, please take the battery out.
Projector Interface
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>