Futaba SkyLeaf Samba f Electric RC Airplane Instruction Manual

Futaba SkyLeaf Samba f Electric RC Airplane Instruction Manual

Thank you for purchasing Futaba’s Sky Leaf R/C airplane.
To maximize your enjoyment, and to ensure proper flying, please read through this assembly instruction manual.

Futaba guarantees this kit to be free from defects in both material and workmanship at date of purchase. This warranty does not cover any component parts damaged by use or modification. In no case shall Futaba liability exceed the original cost of the purchased kit. Further, Futaba reserves the right to change or modify this warranty without notice.

In that Futaba has no control over the final assembly or material used for final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user-assembled product, the user accepts all resulting liability. If the buyer is not prepared to accept the liability associated with the product, the buyer is advised to return this kit immediately in new and unused condition to the place of purchase.

Precautions

Application and Modification Precautions.

1. This product is only designed for use with radio control models. Use of the product described in this instruction manual is limited to radio control models.

2. Modification, adjustment, and parts replacement:
   Futaba is not responsible for unauthorized modification, adjustment, or replacement of parts on this product.

3. Your Sky Leaf should not be considered a toy, but rather a sophisticated, working model that functions very much like a fullsize airplane. Because of its performance capabilities, this airplane, if not assembled and operated correctly, could possibly cause injury to yourself or spectators and damage to property.

4. You must assemble the model according to the instructions. Do not alter or modify the model, as doing so may result in an unsafe or unflyable model. In a few cases the instructions may differ slightly from the figures. In those instances the written instructions should be considered as correct.

5. You must take time to build straight, true and strong.

6. You must use an R/C radio system that is in good condition, a correctly sized motor, and other components as specified in this instruction manual. All components must be correctly installed so that the model operates correctly on the ground and in the air. You must check the operation of the model and all components before every flight.

7. If you are not an experienced pilot or have not flown this type of model before, we recommend that you get the assistance of an experienced pilot in your R/C club for your first flights. If you’re not a member of a club, your local hobby shop has information about clubs in your area whose membership includes experienced pilots.

8. While this kit has been flight tested to exceed normal use, if the plane will be used for extremely high stress flying, such as racing, or if a motor larger then one in the recommended range is used, the modeler is responsible for taking steps to reinforce the high stress points and/or substituting hardware more suitable for the increased stress.
   ■ No part of this manual may be reproduced in any form without prior permission.
   ■ The contents of this manual are subject to change without prior notice.
   ■ Futaba is not responsible for the use of this product by the customer.
   ■ Company and product names in this manual are trademarks or registered trademarks of the respective company

For safe use

Please observe the following precautions to ensure safe use of this product at all times.
Meaning of Special Markings:
The parts of this manual indicated by the following marks require special attention from the standpoint of safety.

WARNING: Always keep R/C components away from small children.

Assembly Precautions

Storage and Disposal Precautions

Other Precautions

Flying Precautions

Battery and Charger Handling Precautions

1) Required for operation (Purchase separately)

2) Set Contents

3) Wing Assembly

4) Stabilizer Installation

5) Motor Cowl Installation

6) Main Gear Installation

7) Tail Gear Installation

8) Receiver & Battery (Not Furnished) Installation

9) Wing Installation

10) Canopy Installation

11) Propeller Spinner

12) C.G Position

13) Set the Control Throws

To ensure a successful flight, fly your skyleaf set up only according to the C.G. in this manual. This provides
you with the best chance for success and enjoyable first flights that should be surprise-free. A model that
is not properly setup may be unstable and possibly unflyable.

14) Specification

The product is not repairable by Futaba service center if damaged.

FUTABA Corporation of America
2681 Wall Triana Hwy Huntsville, AL 35824, U.S.A.
Phone:1-256-461-9399 FAX:1-256-461-1059
https://www.futabausa.com/
E-mail: service@futabaUSA.com

References

• FutabaUSA - What's life without a hobby?

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>