HENDI 147801 Hokker Kitchen Line User Manual

HOKKER KITCHEN LINE

Hokker 147801

You should read this user manual carefully before using the appliance.

Keep these instructions with the appliance.

• Only use this appliance indoor in a well ventilated area.
• Read the instructions before using the appliance.
• WARNING: accessible parts may be very hot. Keep young children away.
• Do not move the appliance during use.
• Turn off the gas supply at the gas cylinder after use.

Innovatielaan 6, 6745 XW De Klomp,
The Netherlands
www.hendi.com

|
---|---
Item| Hokker 147801| Natural gas| PIN : 0063BL3315
Country| DE/PL/RO/LU| AT/CH/IT/HU/GB/IE/GR/CZ/SK| BE/FR
Category| I2E| I2H| I2E+
Power| [Hi] 6,5 kW| [Hi] 6,5 kW| [Hi] 6,5 kW
Set up| G20-20 mbar| G20-20 mbar| G20-20 mbar
Consumption| 0,688 m³/h| 0,688 m³/h| 0,688 m³/h
Appliance type| A1
Serial no.|

Innovatielaan 6, 6745 XW De Klomp,
The Netherlands
www.hendi.com

|
---|---
Item| Hokker 147801| Propane/Butane| PIN : 0063BL3315
Country| NL/DE/AT/CH| BE/FR/PL/LU/GB/IE/GR/IT| AT/CH/HR| RO/IT/HU| CZ/SK
Category| I3P| I3P | I3B/P| I3B/P| I3+
Power| [Hi] 6 kW| [Hi] 5kW| [Hi] 6,8 kW| [Hi] 5,2 kW| [Hi] 5,2 kW
Set up| G31-50 mbar| G31-37 mbar| G30/31-50 mbar| G30/31-30 mbar| G30/28-30 mbar
G31/37 mbar
Consumption| 466 g/h| 388 g/h| 536 g/h| 410 g/h| 410 g/h / 404 g/h
Appliance type| A1
Serial no.|

Dear Client,

To avoid damage due to improper use or storage please read this operation manual carefully. It contains important notes on the installation, safety, operation and care of the appliance. We recommend that you keep this manual and the product warranty together in a safe place for further reference. Please pay special attention to the safety instructions.

Safety regulations

• Only use this appliance indoor in a well ventilated area.

• These instructions are only valid if the country code appears on the appliance. If the code does not appear on the appliance, refer to the technical instructions for adapting the appliance to the conditions for use in that country.

• This appliance is only for professional use and it may only be used by qualified people.

• Incorrect operation and improper use of the appliance can seriously damage the appliance and injure users.

• The appliance may only be used for the purpose it was intended and designed for. The manufacturer is not liable for any damage caused by incorrect operation and improper use.

• Never try to open the casing of the appliance yourself.

• Do not insert any objects in the casing of the appliance.

• Do not use the appliance after it has fallen or is damaged in any other way. Have it EN checked and repaired, if necessary, by a certified repair company.

• Do not try to repair the appliance yourself. This could give rise to life-threatening situations.

• Always keep an eye on the appliance when in use.

• Children do not understand that incorrect use of appliances can be dangerous. Therefore, never let children use appliances without supervision.

• Do not use any extra devices that are not supplied along with the appliance.

• The use of the installation must comply with the applicable national and local regulations.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• This appliance is intended solely for preparing food.

• Gas and electrical installations should be checked at least once a year.

• We recommend to use only gas cylinders with a capacity of more than 10 kilograms.

• Perform gas cylinder replacement away from potential ignition sources.

• Always place the gas cylinder adjacent to the appliance, not underneath it.

• If a gas leak is detected immediately close the gas valve on the gas bottle.

• Note that parts of the appliance can become very hot. Wear protective clothing (gloves) if you must touch them anyway.

• This appliance is supplied with components for conversion to use with natural gas. This conversion should only be carried out by a qualified engineer in accordance with local and national safety regulations.

• The installer should pay attention to not disturb the air combustion admission nor the combustion products evacuation of appliances fitted with open burners.

• Be careful of the position of the connection flexible tube so as to ensure that it is not subjected to twisting. The hose does not come in contact with hot parts and sharp edges.

Special safety regulations

• Necessary changes may only be done by a qualified technician.

• Use only the supplied pressure regulator.

• This appliance is only suited for Propane/Butane gas in its default configuration.

• Check that there are no kinks in the gas hose.

• This appliance must be kept away from flammable materials during use.

• The appliance should be placed horizontally and be prevented from leaning or shaking in use.

• Certain accessible parts of the appliance can become extremely hot during operation. In view of this, keep the appliance out of reach of children.

• Install the appliance with a clear space of 30cm on all sides of the device.

• The appliance must be installed in accordance with the applicable national regulations.

• Do not move the appliance during use.

• Always close the gas valve on the gas bottle if the appliance is no longer being used.

• Changing or modifying this equipment is dangerous and therefore not allowed.

• Parts which are fastened or sealed by the manufacturer, are not to be loosened or adjusted by the user.

• Install the appliance as level as possible with regard to the grease drain.

• Do not cover the ventilation openings in the appliance.

• To prevent blockage of the venturis, keep the venturis and the surrounding area clean of dust, cobwebs, etc.

• Suitable for pans between Ø230-420 mm.

• WARNING: some parts of the appliance can become hot. Keep children away from the appliance.

• Checking the tubing or the flexible hose per month and each time the cylinder is changed.

• This appliance shall be installed in conformity with the current regulations and used only indoor in a well-ventilated location. Consult the instructions before installing and using this appliance.

• WARNING: assembly of the tubing must be conducted by some qualified tuber of destination countries.

• Approved gas regulator(EN16129: 2013) is used according to appliances categories and countries listed in data plate. Approved flexible hose would be changed when the national conditions require it & consult the local regulations, these may differ.

• The tubing or the flexible hose must be changed within the prescribed intervals or with-in one year. The flexible hose should not extend than 1.5m according to standard EN 16436-1:2014+A3:2020.

• The maximum cylinder dimensions(regulator included) should not exceed (D)50x(H)75cm if no cylinder compartment included.

Intended use

• The device is intended for professional use and can be operated only by qualified personnel.

• The appliance is designed only for cooking a variety of food via heating the suitable cookware. Any other use may lead to damage to the appliance or personal injury.

• Operating the appliance for any other purpose shall be deemed a misuse of the device. The user shall be solely liable for improper use of the device.

Connecting the gas bottle

1 = Main tap
2 = Pressure regulator
3 = Gas hose
4 = Gas Bottle
5 = Rubber washer

Attach the pressure regulator to the gas bottle using the large brass nut. Always ensure that the rubber-sealing washer is present in the nut. (NB. This rubber washer is not required for UK-type pressure regulators). Tighten the nut and gas hose well. Note that the nut has a left-hand thread.

Check the connections for leaks using a soap and water solution.

Every time a newly filled gas bottle is connected, a new rubber washer must be fitted. In most cases, your gas supplier will include it with the bottle.

Gas Connection

1. A manual snap gas shut-off valve must be installed upstream of gas supply of the appliance, where it is within the easy reach of the operator.
2. Verify fuel gas type. If the available fuel does not match the said specification, please do not connect the gas to the appliance. Exchange the injector for the correct type.
3. The gas supply line used to connect the appliance to the gas supply system must be approved by local ordinance for gas piping.
4. If the gas piping pressure exceeds or remains under 10% of the rated pressure, a gas pressure regulator must be supplied to ensure the stabilization of the gas pressure.
5. After the successful connection, all pipe joints should be checked for leaks before lighting. Leak checks should be performed with a soap and water solution. Never use an open flame to check for gas leaks. Fire and explosion may result.

Instructions for use

Ignition:

1. Push down the control knob.
2. While pressing, turn the control knob to the position between “ ” and “ “.
3. While knob is in this position press the ignition button several times
4. Keep the control knob pressed for 10-15 seconds
5. Move the control knob to the desired setting between “ ” and “ ” .

Hokker 147801

Set up| G20: 20mbar| G31: 50mbar| G31: 37mbar| G30/31: 50mbar| G30/31: 30mbar|

G30: 28-30mbar

Reduced input power (kW)

| 1.7| 3.8| 3.8| 4.6| 2.1| 2.1
Reduced input gas consumption| 0.180 m³/h| 295 g/h| 295 g/h| 363 g/h| 166 g/h|

166 g/h

If the flame fails to remains lit, repeat the procedure, keeping the control knob pressed in for a few extra seconds.

Extinguishing

1. Turn the control knob to the “ ” position.
2. Attention! After extinguishing wait ±10 minutes before re-igniting the burner

After extinguishing always close the main gas valve!

Cleaning and maintenance

• Let the appliance cool down before cleaning

• Beware: Never immerse the appliance in water or any other liquid!

• Clean the outside of the appliance with a damp cloth (water with mild detergent).

• Clean the ventilation slots (if applicable) with a vacuum cleaner.

• Keep inside after use.

• Let specialised personnel clean at least once a year the burner.

• Never use a high pressure cleaner.

Troubleshooting

If the appliance does not function properly, please check the below table for the solution.
If you are unable to solve the problem, please contact the supplier / service provider.

Thermocouple malfunction
Dirty spark plug
Gas hose blocked
Injector blocked
Burner will not ignite fully| Gas hose blocked
Gas valve not completely open
Injector blocked
Gas valve malfunction

Note

• It is recommended to replace the gas hose after 3 or 4 years (see date shown on hose). The gas hose becomes porous after a time. Also check the hose for leaks on a yearly basis at least. Even if the expiration date has not been expired yet, you must check the condition of the hose always. In case of damage/cracks you have to replace the hose immediately. Please make sure that you comply with all local health and safety regulations (e.g. firecode).

• Pressure regulators have a default maximum life span as indicated by the date printed on the regulator, but please note that local health and safety regulations may overrule this.

• Only replace the pressure regulator with one provided by the manufacturer.

• Consult the local regulations, these may differ.

• Always store gas bottles upright, in use as well as when empty.

Conversion instructions for Hokker 147801 from Propane/Butane to Natural Gas and vice versa.
NOTE: Applicable not for Netherland.
ATTENTION! This conversion should only be performed by a qualified engineer!

When conversion is complete, please replace the rating label with the supplied alternative.

1| | Use a screwdriver to remove the screw holding the burner in place. Save the screw carefully.
---|---|---
2| | Carefully lift the burner up, out of the device.
3| | Unscrew the injector and keep it in a safe place for future use.
Place the Rating label (Natural gas) over the existing rating label.
4| | Replace the injector with the supplied alternative.

Injector 1.15 for Propane/Butane
Injector 2.0 for Natural Gas

Repeat the steps in reverse order to reassemble.

Exploded diagram with part list

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof of purchase (e.g. receipt).

In line with our policy of continuous product development we reserve the right to change the product, packaging and documentation specifications without notice.

Discarding & Environment

When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.

HENDI B.V.
Innovatielaan 6
6745 XW De Klomp, The Netherlands
Tel:       +31 317 681 040
Email: info@hendi.eu

HENDI Polska Sp. z o.o.
ul. Firmowa 12
62-023 Robakowo, Poland
Tel:       +48 61 658 7000
Email: info@hendi.pl

HENDI GmbH
Ehring 15
5112 Lamprechtshausen, Austria
Tel:       +43 6274 200 10 0
Email: office.austria@hendi.eu

HENDI Romania S.R.L.
Str. 13 decembrie 94A, Hala 14
Brașov, 500164, Romania
Tel:       +40 268 320330
Email: office@hendi.ro

PKS HENDI South East Europe SA
5 Metsovou Str.
18346 Moschato, Athens, Greece
Tel:       +30 210 4839700
Email: info@pks-hendi.com

HENDI Italia S.R.L.
Via Leonardo da Vinci 4
39100 Bolzano (BZ), Italy
Tel:      +39 800 727 438
Email: office.italy@hendi.eu

HENDI HK Ltd.
1208, 12/F Exchange Tower
33 Wang Chiu Road, Kowloon Bay, Hong Kong
Tel:       +852 2154 2618
Email: info-hk@hendi.eu

Find HENDI on internet:
www.hendi.com
www.facebook.com/HendiToolsforChefs
https://www.linkedin.com/company/hendi-tools-for-chefs/
www.youtube.com/HendiEquipment

Changes, printing and typesetting errors reserved.

© 2023 HENDI B.V. De Klomp – The Netherlands           Ver: 04-04-2023

References

• hendi.com
• hendi.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>