WatchGuard BS1AE3 Firebox NV5 Hardware Guide User Guide

: June 12, 2024
: Watchguard

Table of Contents

Activate Your Firebox
Connect Your Firebox and Power It On
Connect to the Web UI
DECLARATION OF CONFORMITY
IMPORTANT NOTES
Documents / Resources

Firebox® NV5
HW Model: BS1AE3
Quick Start Guide WatchGuard BS1AE3 Firebox NV5
Hardware

Activate Your Firebox

Go to www.watchguard.com/activate
Log in to your WatchGuard account, or create a new account.
If you create a new account, return to www.watchguard.com/activate after you finish the account creation process.

Connect Your Firebox and Power It On

Make sure your computer is configured to use DHCP. When you connect to the Firebox, it will assign an IP address on the 10.0.1.0/24 network.

WatchGuard BS1AE3 Firebox NV5 Hardware - Power It On

Connect to the Web UI

Go to https://10.0.1.1:8080 You can safely ignore certificate warnings, because the Firebox uses a self-signed certificate.
Log in with the user name admin and the passphrase readwrite.
Follow the directions in the Web Setup Wizard to configure your Firebox.
Install the Firebox in your network.
For more information, go to watchguard.com/start

DECLARATION OF CONFORMITY

WatchGuard Technologies, Inc.
505 Fifth Ave. S., Suite 500 Seattle, WA 98104-3892 USA
WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration.
Product(s):
WatchGuard Product Name : Firebox NV5
Hardware Model : BS1AE3 EU Directive(s):
Low Voltage (2014/35/EU)
Electromagnetic Compatibility (2014/30/EU) RoHS EU 2015/863(RoHS2 WEEE Directive 2012/19/EU REACH EC 1907/2006, SVHC 201
Standard(s):
Safety: EN 62368-1 ：2014 + A11:2017
Emission: EN 55032:2015/A1:2020 Class A
FCC Part 15B
ICES-003: Issue 7
CISPR 32 Ed 2.1: 2015+AMD1:2019
VCCI-CISPR 32:2016-11 AS/NZS CISPR 32:2015 AMD1 :2020
EN IEC61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A1:2019
Immunity: EN 55035:2017/A11:2020
IEC 61000-4-2:2008
IEC 61000-4-3:2020
IEC 61000-4-4:2012
IEC 61000-4-5: 2014+AMD1:2017
IEC 61000-4-6:2013
IEC 61000-4-8:2009
IEC 61000-4-11:2020

Signature:
Full Name: Laurence Huang
Position: Hardware Program Manager
Date: 17 May 2022

IMPORTANT NOTES

CE Notice:
The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).
RoHS Statement
The member states of the European Union approved directive 2002/95/ EC, Restrictions of Hazardous Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and electronic equipment put on the market within the ember states must not contain certain hazardous materials. This device complies with the European Union’s R0HS directive 2002/95/EC and similar regulations that may be adopted by other countries for European Sales. To see additional certification information and languages, go to watchguard.com/start

WATCHGUARD TECHNICAL SUPPORT
1.877.232.3531 (U.S. and Canada) +1.206.613.0456
(all other countries) www.watchguard.com/support
ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104
U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895 WEB: www.watchguard.com
©2022 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-NV50-001 120122 Rev A

https://www.watchguard.com/start

Documents / Resources

| WatchGuard BS1AE3 Firebox NV5 Hardware Guide [pdf] User Guide
BS1AE3 Firebox NV5 Hardware Guide, BS1AE3, Firebox NV5 Hardware Guide, NV5 Hardware Guide, Hardware Guide
---|---