AVOLTA LoRaWAN Gas Alarm User Manual
- June 12, 2024
- AVOLTA
Table of Contents
TEST BUTTON
**Before each installation please reconnect the battery then press TEST
button for 10 sec.
Battery test
3 LEDs blinking (one by one) + Beep if battery is OK
Alarm test
Beep + Pre-recorded message + red LED blinking
LoRaWAN join request**
Beep at 3s + 2 Beeps at 10s + Network join request (even if already joined)
LED STATUS
Power
Green: Battery and network status
Blinks every minute when battery is low Blinks during LoRaWAN connection + 3
times if connection is successful
Trouble
Yellow: Product or network error
Blinks every minute when a sensor fault is detected Blinks 3 times if LoRaWAN
connection fails
Alarm
Red: Gas alarm
Blinks every minute when gas concentration is above threshold
POWER ON SEQUENCE
STARTING SEQUENCE
Keep Avolta in a methane-free environment during the 6 min warm-up.
Get access to :
- User Manual
- Datasheet
SCAN THIS QR CODE or enter this link
Visit elichens.com for more information or contact us at info@elichens.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>