IKIER K1 Ultra 36W Laser Engraving and Cutting Machine Instruction Manual

June 12, 2024
IKIER

IKIER K1 Ultra 36W Laser Engraving and Cutting Machine

Specifications

  • Product Name: IKIER K1/K1 Pro/ K1 Ultra
  • Model: F03-0114-0AA1 Version B
  • Power Cable: M5X10 4pcs
  • Screws: M3X6 4pcs

Product Usage Instructions

  1. Step 1: Machine Setup
    Put the machine vertically and push the left and right Y-axis  sliders to the bottom to ensure accuracy.

  2. Step 2: X-Axis Rail Installation
    Remove the upper cover of the X-axis and install the X-axis rail using provided screws.

  3. Step 3: Tightening Screws
    Tighten the screws securely to ensure stability.

  4. Step 4: Cover Installation
    Install the upper cover of the X-axis securely.

Installation Manual

Scan code for installation video

  1. X-axis rail
  2. Knurled screws 2PCS (M4*12)
  3. Laser module
  4. Power cable
  5. Typ C data cable
  6. Control screen
  7. Machine frame

installation

  1. Step 1
    Put the machine vertically and push the left and right Y-axis sliders to the bottom

  2. Step 2
    Remove the X-axis top cover

  3. Step 3
    Install the X-axis rail

  4. Step 4
    Install laser module Insert the Type-C head into the Type-C socket at the back of the fiber optic box.
    Tighten the screws
    Wiring Method
    Used to connect the protective box spare cable

  5. Step 5
    Install the X-axis top cover

  6. Step 6
    Connect the Type-C Data Cable

Connect the other end of the Type-C cable, the 4P cable, to the tail of the laser.

  1. Step 7
    Test Process – Power On

Turn on the machine power switch first and then turn on the fiber laser control box switch to avoid about 2 seconds‘ probabilistic light emission after power on.

Focus Adjustment

  1. Position the test material on the machine.
  2.  Observe whether the red light spots at the left and right ends of the laser head overlap. If not, adjust the height by rotating the knob on the Z-axis to make the two spots coincide.

Laser Frequency

The frequency of the control box can be adjusted from 30kHz to 60kHz. Refer to the parameter table for adjustments.

Step 8
Software Usage

  1. For how to use lightburn and laserGRBL, refer to the user manual of the machine

  2. Frame settings: lightburn: You don’t need to hold down the shift key when framing, you can see the framing situation through the red light indicator laserGRBL: The power needs to be set to S0 when framing

  3. Right-click Frame and click Edit button.

  • Engraving power settings : Power Max(%) > 10%, refer to the parameter table for specific values.
  • Please note: Engraving vector mode should be set to “M3 mode”.
  • Follow the steps below to operate: “Cuts / Layers” -> “Line” -> “Constant Power Mode”.

laserGRBL does not require setup

Step 9. FAQ

  • Ajustes de potencia de grabado: Potencia máxima (%) > 10%, consulte la tabla de parámetros para valores específicos.
  • Tenga en cuenta: El modo vectorial de grabado debe establecerse en “modo M3”.
  • Siga los pasos a continuación para operar: “Cortes / Capas” -> “Línea” -> “Modo de potencia constante”.
  1. If the engraving or cutting effect is not satisfactory:

  2. Check if the laser is in the focal position.

  3. Check the cleanliness of the lens.

  4. If there is a malfunction with the red light indicator and it is inconvenient to check the focal distance through overlapping red lights, you can adjust the focal distance through fixed focus method (distance from laser end face to the measured object:
    94+/-1mm).

  5. If there are no traces or uneven energy in the engraved vector lines:

    •  Check if the laser is in the focal position.
    • Confirm if it is operating in M3 constant power mode.

Customer service:
For detailed warranty policy, please visit our official website: www.ikier.com
For technical support and service, please email: support@ikier.com

Manufacturer:
Shenzhen Ikier Technologies Co., Ltd.

Address
422, Building 1, Xili Bright Science Park, No. 178, Zhuguang
North Road, Nanshan District, Shenzhen, China

Scan QR code
QR code reader/barcode scanner or any app with a scanner

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals