Clarke MFL800R Rechargeable Multi Function Work Light Instruction Manual

Clarke MFL800R Rechargeable Multi Function Work Light

Product Information

Technical Specifications

• Model: MFL800R
• Operating Voltages: 3.7V (light), 230V (charger)
• LED Wattage Consumption: 9W (max)
• LED Replaceable: No
• Rechargeable Lithium Battery: 3.7V / 4400mAh
• LED Light Source: 4 x 1W SMD, 1 x 5W LED, 1 x 2W LED
• Light Output (Luminous Flux): 800 Lm
• Colour Temperature (Rendering): 6000 – 6800K
• Ingress Protection (IP rating): IP20
• Battery Charging Time: 6 hours
• Approximate Run Time: 5 Hours
• Efficiency: 88 Lm/W
• Operating Temperatures: 0 to +45°C
• Dimension: 55 x 255 x 42mm
• Weight: 330g

Guarantee
This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.

Safety Instructions

1. Check for damage before using the worklight.
2. Ensure the voltage marked on the charger matches the power supply.
3. Avoid using the lamp in a bathroom or near a swimming pool.

Environmental Recycling Policy
Customers are responsible for dealing with WEEE in accordance with regulations for treatment, recycling, recovery, and disposal.

Contact Information

• Parts & Service: 020 8988 7400
• Email: [email protected] or [email protected]

FAQ – Frequently Asked Questions

• Q: Can the LED lights be replaced?
  A: No, the LED lights in this worklight are not replaceable.

• Q: How long should I charge the worklight before first use?
  A: It is recommended to fully charge the worklight for approximately 6 hours before first use.

• Q: What should I do if the product is damaged?
  A: If you notice any damage to the product, please consult your local CLARKE dealer for proper repair or replacement.

MULTI-FUNCTION WORK LIGHT

• MODEL NO: MFL800R
• PART NO: 4003542

INSTRUCTIONS FOR USE

INTRODUCTION

Thank you for purchasing this CLARKE Worklight. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.

TECHNICAL SPECIFICATIONS

GUARANTEE

• This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose.
• Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights.

SAFETY INSTRUCTIONS

1.  ALWAYS check for damage before using the worklight. Inspect the power cable and plug for damage. Any damage should be properly repaired or the part replaced. Consult your local CLARKE dealer.
2. ALWAYS ensure that the voltage marked on the charger matches the power supply to be used.
3. NEVER use this lamp in a bathroom or in the vicinity of a swimming pool.
4. NEVER cover the lamp.
5. NEVER pull the cable to remove the charger plug from the power supply.
6. DO NOT look directly into the worklight when it is switched on.
7. Keep the worklight out of the reach of children.
8. Charge the worklight in a dry indoor location. DO NOT immerse in water or any other liquid.
9. ALWAYS fully charge before first use.
10. DO NOT turn on the light when charging.
11. DO NOT leave the worklight on charge for more than 24 hours.
12. DO NOT disassemble the worklight as there are no user changeable parts.
13. This worklight utilises a rechargeable Lithium-ion battery that can rupture, ignite and cause serious injury if being used improperly.
14. DO NOT put batteries and the worklight in the fire or high temperature.
15. DO NOT puncture or damage the batteries.
16. DO NOT immerse or expose the worklight to water.
17. DO NOT dispose of the worklight in a fire or water.

THE FOLLOWING WARNING SYMBOLS ARE FOUND ON THE PRODUCT

•   Indoor use
• Harmful to aquatic life
• Pacemaker hazard (due to magnet)
• Not suitable for use by children

ENVIRONMENTAL RECYCLING POLICY

• Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.
• In effect, this means that this product must not be disposed of with general household waste but according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.
• The light source contained in this worklight has a life expectancy of approximately 50000 hours after which the worklight should be disposed of in an environmentally responsible way.
• The Lithium Ion battery falls under the Waste Batteries and Accumulators Regulations 2009 and should be disposed of in a controlled manner.

BATTERY CHARGING

1. Connect the AC charging adaptor to the charging jack on the worklight.
2. Connect the other end of the charger to the 230V mains power supply and charge until fully charged.
   • The battery condition indicator will illuminate when charging.
   • The worklight should not be used while using the charger.
3. The battery should be re-charged at least every 3 months. Failure to re-charge the battery will lead to reduced performance of the worklight and to premature battery failure.
4. If you plan to store the worklight (e.g. for emergencies), we recommend that the battery is fully charged before doing so. This will ensure the longest possible battery life.
5. NEVER abuse the charger cable or yank the cable to disconnect it. Keep the cable away from sharp edges/hot surfaces.

OPERATION

To switch on the different LEDs, press the ON/OFF button in the following sequence.

1. The first press switches on the centre light.

2. The second press switches on the two upper and two lower LEDs.

3. The third press switches on all LEDs.

4. The fourth press makes all lights brighter.

5. The fourth press switches off the main lights and switches on the end LED (torch) light.

6. The fifth press switches the unit off.
   NOTE: If set to 3 or 4 for longer than a few seconds, the next press switches the unit off.

   • CAUTION: NEVER SHINE ANY LED LIGHT DIRECTLY INTO ANYONE’S EYES.
   • Attach the worklight to a suitable support using the folding hook or attach to a ferrous metal surface using the magnetic retainer.
   • Angle the worklight to suit the task by bending and/or twisting the top half of the unit to shine in any direction.
   • To keep your worklight clean, wipe with a damp cloth only, DO NOT use detergents, chemicals or harmful abrasives. Never immerse in water.

COMPONENT PARTS

DECLARATIONS OF CONFORMITY

A SELECTION FROM THE VAST RANGE OF

• QUALITY PRODUCTS  AIR COMPRESSORS
  • From DIV to industrial, Plus air tools,  spray guns and accessories.
• GENERATORS
  • Prime duty or emergency standby  for business, home and leisure.
• POWER WASHERS
  • Hot and cold, electric and engine  driven – we have what you need
• WELDERS
  • Mig, Arc, Tig and Spot.
  • From DIV to auto/industrial.
• METALWORKING
  • Drills, grinders and saws for DIV  and professional use.
• WOODWORKING
  • Saws, sanders, lathes, mortisers and dust extraction.
• HYDRAULICS
  • Cranes, body repair kits,  transmission jacks for all types of workshop use.
• WATER PUMPS
  • Submersible, electric and engine-driven for DIV, agriculture and industry.
• POWER TOOLS
  • Angle grinders, cordless drill sets,  saws and sanders.
• STARTERS/CHARGERS
  • All sizes for car and commercial use.

• PARTS & SERVICE: 0208 988 7400
• Parts Enquiries [email protected]
• Servicing & Technical Enquiries [email protected]
• SALES: UK 01992 565333 or Export 00 44 (0)1992 565335
• ClarIke INTERNATIONAL Hemnall Street, Epping, Esse CM164LG
• www.clarkeinternational.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>