NAL RESEARCH SHOUT tsM Handheld Global Satellite Personal Tracker User Guide

NAL RESEARCH SHOUT tsM Handheld Global Satellite Personal Tracker

DEVICE DESCRIPTION OVERVIEW:

The SHOUT tsM is a handheld, global, satellite personal tracker designed to operate with the Iridium low-Earth orbit satellite network. It provides location information determined by the selected receiver. It comprises an Iridium 9603 transceiver module; a Military GPS receiver; a GNSS receiver; an embedded 3800 mA-Hr battery, an Iridium antenna, an L1/L2 GNSS/M-Code antenna; and an IP67 screen display w/ protective overlay. The SHOUT tsM allows only SBD connectivity to the Iridium satellite network.

IMPORTANT: The SHOUT tsM antennas must have a clear view of the sky during transmission

DEVICE DESCRIPTION

• Micro DB-15 Connector Port: The micro DB-15 connector port is IP-67 compliant. It is mounted on the side of the device above the USB-C connector port, and supports:
  • EKMS-308 Compliant Key-Fill
  • SHOUT Bidirectional Data Transfer Mode supporting Position-Only and Precise-Time transfers.
• USB-C Connector Port: The USB-C connector port is IP-67 compliant, and is mounted on the side of the SHOUT tsM device. It is used to power the device, charge the embedded battery, and data usage.

HARGING BATTERY

• Fully charge the SHOUT tsM using a USB-C cable.
  NOTE: NAL Research recommends an AC adapter that is capable of 2.5A at 5V for fastest charging speed.

EMERGENCY MODE

• Activate: Slide the Emergency Switch Cover, and quickly press and release the Emergency button to trigger emergency tracking. When emergency tracking is active, the Emergency LED illuminates.
• Deactivate : Press/hold the Emergency button longer than three (3) seconds to take the SHOUT tsM out of emergency tracking

POWER-ON/NAVIGATE TO HOME SCREEN

1. Press the Power button (2-3 seconds).
2. Press Press to Unlock button.
   The Home screen displays.

Select Receiver

1. Press Setting on the Home screen.
   The Setting screen displays.

2. Press PNT.
   The PNT Setting screen displays.

3. Press PNT Selection.
   The PNT Selection screen displays.

4. Select Commercial or MIL.

Display MIL Status

1. Select Utilities from the Home screen.
   The Utilities screen displays.

2. Select MIL.
   NOTE: If the MIL encryption keys are not loaded, make the appropriate contact to load the encryption keys.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>