NAL RESEARCH 9602-AB Ultra Low Power Consumption Tracker User Guide
- June 12, 2024
- NAL RESEARCH
Table of Contents
NAL RESEARCH 9602-AB Ultra Low Power Consumption Tracker
Product Information
The 9602-AB is a device that provides various indicators such as Power indicator, Iridium signal strength, GPS availability, SBD transmission status, and Emergency mode alert. It comes with Power LED, Iridium LED, GPS LED, Status LED, and Emergency LED for visual feedback. The device has Iridium and GPS antennas embedded inside the lid. It also features an Emergency button, a Power On/Off button, and a USB-Mini connector for connectivity.
LED Indicators
- Power LED (Top)
- Iridium LED
- GPS LED
- Status LED (Top)
- Emergency LED
Contact Information
Support Phone#: 571-833-2169
Email: Support@Nalresearch.com
Manual Version: 451-92681-004A
Valid Until: 2023-03-31
Product Usage Instructions
Emergency Mode
- Activate
- To activate Emergency Mode, quickly press and release the Emergency button. This will trigger emergency tracking and the Emergency LED will illuminate.
- Deactivate
- To deactivate Emergency Mode, press and hold the Emergency button for longer than three (3) seconds.
Power On/Off Device
- Press the Power button for two (2) seconds to turn on the device. The device will start in Track mode and send out tracking reports.
- Depending on the device configuration, press the Power button for two (2) seconds to turn the device off.
Charging the Battery
- Connect the USB mini cable to the USB mini connector port on the 9602 device.
- Connect the USB connector on the USB mini cable to the USB connector port on the AC Wall Adapter.
Configuring the Device
- Connect the USB mini cable to the USB mini connector port on the 9602 device.
- Connect the USB connector on the other end of the USB mini cable to the USB connector port on a DTE (Data Terminal Equipment).
- Configure the device using SatTerm/At Commands.
DEVICE DESCRIPTION
The 9602-AB Tracker is an ultra-low power consumption tracker designed for SBD communication using the Iridium satellite network. It comprises an internal Iridium antenna, an internal GPS antenna, and an internal Li-ion battery. The 9602-AB can send either standard or 256-bit AES-encrypted GPS reports at a pre-programmed interval ranging from once every 60 seconds to once every seven (7) days. The interval can be changed via SatTerm or AT commands using a Data Terminal Equipment (DTE).
- IMPORTANT : The 9602-AB antennas must have a clear view of the sky during transmission.
- LED Settings: There are five (5) status LEDs that provide quick visual checks to ensure proper operations. These include Power indicators, Iridium signal strength, GPS availability, SBD transmission status, and Emergency mode alert.
NOTE : The 9602-AB ships with all LEDs set to ACTIVE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>