OLIGHT Olantern Classic Mini LED Lantern Flashlight User Manual
- June 12, 2024
- OLIGHT
Table of Contents
OLIGHT Olantern Classic Mini LED Lantern Flashlight
Product Information
The Mini is a stylish mini camping light with dual light sources. It features
a battery level indicator that displays the remaining battery level when
rotating the rotary knob switch. The indicator also turns on automatically
when charging or discharging
the light. The product comes with a handle buckle, USB-C charging cable, and
has warm white light mode and orange light mode.
Specifications
- Warm White Light Mode CCT: 5000~5500K
- High mode: 300 lumens, 18 minutes runtime at 100%, 5 hours runtime at 62%, and 4 hours runtime at 26%
- Low mode: 130 lumens, 9 hours runtime at 100%, and 3 hours runtime at 60%
- Orange Light Mode CCT: 2000~2100K
- High mode: 100 lumens, 6 hours runtime at 100%
- Low mode: 5 lumens, 60 hours runtime at 100%
- IPX5 water-resistant rating
- Dimensions: (L)110(D)123.5mm or (L)4.33(D)4.86in
- Rechargeable Li-ion Battery: 16.65Wh (4500mAh / 3.7V)
Product Usage Instructions
To use the Mini camping light, follow these steps:
- To turn on the light, rotate the rotary knob switch in a clockwise direction.
- To adjust the brightness, continue rotating the knob switch in a clockwise direction to cycle through the different intensity modes: low orange, high orange, low warm white, and high warm white.
- To turn off the light, rotate the knob switch in a counterclockwise direction.
- To check the battery level, rotate the knob switch. The indicator will display the remaining battery level based on the following ranges:
- 30%-100%: Green Light
- 5%-30%: Red Light
- 0%-5%: Red Light Flashing
- While in the locked state, rotate the knob switch to check if the light is locked. The red indicator will be on for 5 seconds to indicate the locked status.
- To charge the Mini camping light, connect the USB-C charging cable to a power source with a capacity of 10W or higher. The indicator will display the remaining battery level during charging:
- 100%-95%: Green Light
- 0%-95%: Red Light Flashing
- During discharging, the indicator will also display the remaining battery level based on the same ranges as mentioned above.
Note: Please refer to the user manual for more detailed instructions and safety precautions.
IN THE BOX
SPECIFICATIONS
- Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.
The tests are performed indoors under a room temperature of 25 degrees celsius with windless conditions. The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the results of testing.
PRODUCT OVERVIEW
BATTERY LEVEL INDICATOR
-
a. When rotating the rotary knob switch, the indicator turns on and automatically turns off after 5 seconds; And the red light flashes when the battery level below 5%.
-
b. When charging, the indicator displays the remaining battery level.
-
c. When discharging, the indicator displays the remaining battery level.
*While in the locked state, rotate the knob and the red indicator will be on for 5s to indicate the locked status.
CHARGING
The product was set to be in lockout mode before delivery. Please unlock and fully charge it before first use. Connect one end of the provided USB-C cable to an external USB-C power source (power adapter not included), open the silicone dust plug that shields the USB-C charging port of the product, and then insert the other end of the cable into the USB-C charging port. It takes no more than 5 hours to fully charge the light. The flash red indicator means charging, while the green indicator means charging completed (battery level＞95%).
NOTE:
- Best charging efficiency with a 10W or higher-capacity power source.
- The product will automatically unlock when it is connected to a charger and in lockout mode.
DANGER
DO NOT shine the light directly into human eyes. This may cause temporary
blindness or permanent damage to the eyes.
WARNING
- DO NOT store the product in the car or any place where the temperature may exceed 60℃.
- DO NOT place the product in any dusty environment. Otherwise, the dust may enter the rotary knob switch and cause it to malfunction.
- DO NOT disassemble the product.
- DO NOT immerse the product in seawater or other corrosive media to avoid damage to the product.
- Please prevent it from falling and handle it with care.
- Fully charge the battery before storing the light for a long period of time.
NOTICE
- Please keep the product away from radios, as the PWM modulation of the rotary knob may cause noise to the radio signals.
- The vintage copper color is a result of aging craftsmanship. The uneven color is normal.
- Best charging efficiency with a 10W or higher-capacity power source.
- When the light is turned on at the high warm white light setting for 15 minutes, the brightness will slowly drop to 62% within 3 minutes, and then remain constant.
- When the battery power is lower than 30%, the maximum brightness of warm white light is limited to 26%, and the maximum brightness of orange light is limited to 57%.
- Vibrate Alert: A long vibration alert will activate when locking or unlocking the product. A short vibration alert will activate when switching between orange and warm white light.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual, including
but not limited to using the product inconsistent with the recommended lockout
mode.
HOW TO OPERATE
- ON/OFF: Turn on by rotating the rotary knob clockwise and turn off by rotating counter-clockwise.
- Lock/Unlock: Quickly turn the light on and off twice within 1s.
- Change Light Output: When the light is on, keep rotating the rotary knob clockwise for the stepless adjustment of the light output in the following order: low orange light, high orange light, low warm white light, and high warm white light. Rotating the rotary knob counter-clockwise will change the light output in the reverse order.
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an Authorized retailer or Olight itself.
USA Customer Support: cs@olightstore.com
Global Customer Support:
contact@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town,
Dongguan City, Guangdong, China.
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>