NEUTRIK BDA 559 V3 PowerCON TRUE1 TOP Instruction Manual
- June 12, 2024
- NEUTRIK
Table of Contents
NEUTRIK BDA 559 V3 PowerCON TRUE1 TOP
Product Information
The powerCON TRUE1 TOP connector system is a cable connector and chassis designed for secure and reliable power connections. It is important to regularly check the condition of the connector system for signs of wear and tear to ensure safe usage. Improper use and excessive force can cause the encoding lugs and guide slots in the connector system to become severely worn or damaged. This may result in the cable connector being inserted the wrong way. However, when inserted incorrectly, the cable connector should not twist- lock into place. Inserting a cable connector/plug connector the wrong way can potentially lead to contact between live wires and the grounding contact in the plug socket. It is crucial to follow the usage# instructions and ensure proper insertion and twist-locking to prevent electrical hazards.
Product Usage Instructions
- Before connecting, inspect the condition of the powerCON TRUE1 TOP connector system for any signs of wear or damage.
- Ensure that the notch on the cable connector matches the corresponding guide slot on the chassis.
- Insert the cable connector properly into the chassis, aligning it with illustration A.
- Twist the cable connector clockwise to lock it securely in place.
- Listen for a click sound during the twist-locking process to confirm proper insertion.
- If a connector does not twist the lock correctly or if there is no audible click, immediately unplug it.
- Do not apply excessive force when connecting or disconnecting the cable connector.
Safety Warning
Incorrect insertion of the cable connector may cause electrical contact
misalignment, resulting in equipment malfunction and/or personal injury.
Always ensure proper insertion and twist-locking as per the instructions. The
manufacturer of cord sets and interconnection cord sets is responsible for the
conformity assessment according to applicable regulatory documents. For
further information, refer to the manufacturer’s guidelines.
- Draft. Nr.: BDA 559 V3 Update: 2023-06-28
- Neutrik AG | LI-9494 Schaan | www.neutrik.com
- A brand of the Neutrik Group
SAFETY NOTICE
Please regularly check the condition of your powerCON TRUE1 TOP connector system (cable connector & chassis) for clear signs of wear and tear. Through improper use and excessive use of force, the encoding lugs and guide slots in the connector system can become so severely worn or damaged that it is possible to insert the cable connector the wrong way. However, when inserted the wrong way, the cable connector should not twist-lock into place. A cable connector/plug connector inserted the wrong way could, in some circumstances, lead to contact between live wires and the grounding contact in the plug socket. To determine that the cable connector/plug connector is inserted correctly, follow the use instructions and listen for the “click” when performing the twist-lock. Immediately unplug any connector that does not twist-lock correctly in place.
Note
When connecting, match the notch on the cable connector to the corresponding
guide slot on the chassis.
Note
After inserting properly as in the illustration, twist the cable connector
clockwise to lock.
Note
The proper twist-lock is achieved when the silvery tab is in the position
shown in C and an audible «click» is heard.
SAFETY WARNING
incorrect insertion may cause electrical contact misalignment resulting in
equipment malfunction and/or personal injury. The manufacturer of cord sets
and interconnection cord sets is responsible for the conformity assessment
according to the applicable regulatory documents. Data is subject to change
without prior notice. © 2023 NEUTRIK®. NEUTRIK®, powerCON are registered
trademarks of Neutrik AG. ALL RIGHTS RESERVED.
Note
When connecting, match the notch on the plug connector to the corresponding
guide slot on the chassis.
Note
After inserting properly as in the illustration, twist the plug connector
clockwise to lock.
Note
The proper twist-lock is achieved when the silvery tab is in the position
shown in CC and an audible «click» is heard.
SAFETY WARNING
incorrect insertion may cause electrical contact misalignment resulting in
equipment malfunction and/or personal injury.
Note
When connecting, match the notch on the cable connector to the corresponding
guide slot on the plug connector.
Note
After inserting properly as in the illustration, twist the cable connector
clockwise to lock.
Note
The proper twist-lock is achieved when the silvery tab is in the position
shown in C and an audible «click» is heard.
SAFETY WARNING
incorrect insertion may cause electrical contact misalignment resulting in
equipment malfunction and/or personal injury.
The manufacturer of appliance connection cables and of further connection appliance connection cables is responsible for the conformity assessment according to the applicable directives and standards.
Draft. Nr.: BDA 559 V3 Update: 2023-06-28
Neutrik AG I LI-9494 Schaan www.neutrik.com
Data is subject to change without prior notice. © 2023 NEUTRIK®. NEUTRIK®, powerCON are registered trademarks of Neutrik AG. ALL RIGHTS RESERVED.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>