Scroll Trellis ST-303 26 Inch Planter Arch Trellis Polypropylene Trellis 1 Set Instruction Manual

June 12, 2024
Scroll Trellis

Scroll Trellis ST-303 26 Inch Planter Arch Trellis Polypropylene Trellis

1 Set

Product Information

  • Product Name: Trellis Stake
  • Length: 29 inches
  • Parts Included:
    • 6 Stakes (Bag A) – All small holes open
    • 2 Stakes (Bag B) – Magnified view
    • 2 Pins inserted in Bag B stakes (one at 9 o’clock and one at 3 o’clock)
    • 2 Cable Ties
    • 1 Finial

Product Usage Instructions

  1. Take 1 stake from Bag A and one stake from Bag B.
  2. Lay Stake B (with pins up) on a flat surface and line up Stake A and Stake B together, with the stakes directly across from each other.
  3. Line up another Stake from Bag A to form a T and push them together as shown.
  4. Line up another Stake from Bag A to form an X and push them together as shown. This completes the assembly of the X shape.
  5. Place one X assembly on a flat surface with pins up. Line up the 2nd X assembly over it with the pins pointing toward each other. Position the 2 X parts to form a symmetrical 8-stake trellis.
  6. After assuring the shape is symmetrical, press the upper X assembly together with the lower X assembly.
  7. Secure the 2 X assemblies together by inserting the 2 Zip Ties in the remaining open small holes across from each other. Connect zip ties to the outer sides, leaving the large center hole open.
  8. Trim the zip ties with household scissors.
  9. Install the Finial by pressing it into the large hole.
  10. Fill the container with potting soil. For ease, only install the trellis into a container with soil.
  11. Using a 12″ or wider planter, hold the assembly above your plant and bend each of the flexible leg ends into the planter containing soil.
  12. Push each trellis stake gently into the soil to stake it in position. Ensure the stakes are pushed into the soil in position to maintain the symmetrical shape of the trellis. The soil holds the trellis in place.

Assembly Instructions

Parts Identification

  • Step 1
    Take 1 stake from Bag A and one stake from Bag B as shown

    • Step 2
      Lay Stake B (with pins up) on a flat surface and line up Stake A and together as shown with the stakes directly across from each other
  • Step 3
    Line up another Stake from Bag A to form a “T” and push together as shown

  • Step 4
    Line up another Stake from Bag A to form an “X” and push together as shown

  • Step 5
    Repeat Steps 1 – 4 using remaining Stakes from Bag A & B to make a second X shape

  • Step 6
    Place one “X” assembly on flat surface with pins up. Line up the 2nd “X” assembly over it with the pins pointing towards each other, Position the 2 “X” parts to form the symmetrical 8 Stake trellis.

  • Step 6
    After assuring the shape is symmetrical, press the upper X assembly together with the lower X assembly.

  • Step 7
    Secure the 2 “X” assemblies together by inserting the 2 Zip Ties in the remaining open small holes across from each other. Connect zip ties to the outer sides, leaving the large center hole open.

  • Step 8
    Trim the zip ties with household scissors

  • Step 9
    Install the Finial by press it into the large hole

  • Step 10
    Important, Fill the container with potting soil

For ease, only install the trellis into a container with soil

Top View Symmetrical shape

Push each trellis stake gently into the soil to stake it in position. Ensure the stakes are pushed into the soil in position so as to maintain the symmetrical shape of the trellis The soil holds the trellis in place.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals