CLAXY HG-HCXLST-4156 Industrial Vintage 30 Inch 9-Light Classic Candlestick Black Metal Chandelier Installation Guide
- June 12, 2024
- CLAXY
Table of Contents
CLAXY HG-HCXLST-4156 Industrial Vintage 30 Inch 9-Light Classic
Candlestick Black Metal Chandelier
Dear buyers:
Thank you for buying this product, please read the instructions carefully
before using it.
- Please strictly follow the instructions for the installation
- For replacement parts, please do not arbitrarily retrofit yourself.
IMPORTANT INSTRUCTION
- Always shut off power to the circuit before starting installation work.
- Installation is to be carried out by a qualified electrician.
- This lamp must be permanently wired into the electric system.
- Please do not presume to retrofit or replace fittings to avoid damaged lamps or prevent accidents.
- Use only the specified bulbs. Do not exceed the maximum wattage!
Lampshade Installation
- Shut off the power at the circuit breaker and remove the old fixture, including the crossbar.
- Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to lose any small parts necessary for installation.
- Attach the Mounting Plate to the Outlet Box (not supplied) by using 2 Outlet Box Screws.
- Connect the electrical wires as follows:
- Connect the Black Wire(Live Wire) from the fixture to the Black House Wire (Live Wire, also calls Hot Wire).
- Connect the White Wire(Neutral Wire) from the fixture to the White House Wire (Neutral Wire). Make sure all Wire Connectors are secured. You may wrap the connections with electrical tape.
- If your Outlet Box has a Ground Wire (green or bare copper), connect Fixture Ground Wire with it. Otherwise, connect Fixture Ground Wire directly to the mounting plate in the hole(mark as ND) with the Green Screw. Tuck the wire connections neatly into the Outlet box.
If you found the lamp won’t be illuminated after the wire is installed and inserting an E12 light bulb, please try to raise up the internal metal contactor in the socket. please make sure the power was disconnected before operating.
Read User Manual Online (PDF format)
Loading......