YSJ DFQY-CS16 Neon Floor Lamp User Manual

YSJ DFQY-CS16 Neon Floor Lamp

Important

You may be asked to provide proof of purchase, such as a screenshot of the order number or order details. If you can attach a video or photo to describe the problem, we would appreciate it.

Safety Instructions

Read and follow all safety instructions in this manual: (1) This device uses non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced. For indoor use only.
(2) Avoid minefields, strong magnetic fields, humid and high -voltage areas during installation.
(3) Ensure the wiring is correct and firm to avoid accidents such as short circuit damage to components and burnout of the controller.
(4) Please check whether the input power supply of the controller (must be matched according to the power supply voltage of the controller) meets the pro duct requirements.
(5) Any problem, please don’t repair it without permission, please contact seller.

product description

Thanks for choosing the YSJ Smart Floor Lamp. This floor lamp is designed with a minimalist and modern style.
Creates a soft, cozy atmosphere in your home with its wide range of choices from 16 Million kinds of colors. There are three ways to control this floor lamp, control box, Smart Life APP, and remote control. You can also apply multiple preset scene modes, music modes, timing function, or even customize your own effects by DIV mode from the app. The connection with Alexa or Google Assistant bring your smart life by smart voice control.

Product Listing

1. Floor Lamp*1
2. Power Adapter*1
3. Remote Control*1
4. Screw*8
5. Allen Key*1
6. User Manual*1

At a Glance

1. Lamp Pole
2. Base
3. Control Box
4. Power Cable
5. Power Adapter
6.  Top Latch
7. Base Cover

Control Box Instructions

Remote Control Instructions

Product Specifications

Model: DFQY-CS14
Light pole material: Aluminum Alloy+ Non-toxic Silicone
Lamp Bead Type: S0S0RGB+IC
Number of Lamp Beads: 108PCS (1.39M)
Output Power: 24W (1.39M)
Output Voltage: AC85V-265V
Control Distance: 5-10 meters
Working Temperature: -25°C~ +8S°C
Beam Angle: 160°
Light Bar Size: 139mm8mm(1.39M)
Packing Size: 4919*7cm

Installing Your Floor Lamp

1. Connect three lamp posts, reinforce the lamp bars with Allen Key and screws.
   

2. Straighten the silicone strip light. Align the silicone strip light with the top light pole and press down into the top top light pole then press into second and bottom pole.
   

3. Snap the top latch and bottom cover into the poles.
   

4. Feed the wires on the silicone strip light through the bottom pole that ensure the exposed wires are inside the lamp base.
   

5. Rotate and fix the lamp post .according to the direction of the base.
   

6. Connect the adapter to the cable of the lamp base and plug the adapter into a power outlet to test lighting. The lamp full lighting, which means the installation is successful.
   

Note 1: To avoid deforming the silicone light strip, please press from the top and first, and then press the middle and bottom.

Note 2: Please do not slide the silicone strip light into the light pole from above to avoid deformation of the silicone strip light.

Note 3: The wires connected to the light and the control box need to be inserted in alignment with the arrow marks at both ends, otherwise the light will be damaged.
Caution: Do not cut the stripshort, otherwise it will be damaged.

Smartlife APP Download

|
---|---

1. Register an account and choose your country.
   

2. Connect your phone to WiFi (Only 2.4Ghz)/Open the data network/Turn on the phone’ s Bluetooth.

Networking Method

• Device name: DFQY-CS14
• Turn on device, long press the control box “” button 5s, the floor lamp flashes red, the device enters the network configuration state.

1. Automatic Networking:
   (1) Turn on the phone’ s Bluetooth & WiFi, Login Smart Life APP:
   Pop up the reminder of adding devices within the Bluetooth search range of the mobile phone (figure 1 ). Enter your WiFi account and password (figure2). Complete the device addition (figure 3/4).
   
   (2) When no add reminder pops up, Enter the add interface through [Add Device] in the middle of the screen or [ +] on the upper right of the screen. At this time, the Bluetooth search continues to work, and the search status is displayed on the top of the screen. After searching 1for the product to be added, click the product icon (Figure 5), and follow the prompts to complete the addition.
   

2. Connect your phone to WiFi, Manual networking:
   (1) Select the Atmosphere lamp (Wi-Fi + BLE) in the Lighting category (Figure 1 ), select Next (Figure 2) to enter the 2.4G network selection interface (Figure 3) At this time, the light bar status selection (Blink Slowly/ Blink Quickly) interface (Figure 4).
   
   (2) When the light panel on the back of the floor lamp Blink Quickly, enter WiFi account and password (Figure 1 ), and follow the interface operation prompts to complete the the device addition (Figure 2/3). After the network distribution is successful, the default white light will be on.
   
   (3) When the light bar Blink Slowly, enter WiFi account and password (Figure 1 ). To enter the AP hotspot configuration network jump interface (Figure 2). Click to jump to the mobile network settings (Figure 3), select the Smartlife- XXXX hotspot and return to the Smart Life APP, waiting for the APP to automatically complete the network configuration.
   

APP Control Interface Description

The APP control interface is divided into 5 functional sections:

1. Switch On/Off: Only control the light on and off status of the light strip, without disconnecting the network connection between the mobile phone and the product.

2. Static color setting:
   
   The static color setting display area of the light
   Filling: Set a single color for the entire section of the light
   Paint: Click to select a color in the color selection area of the page, and click the light segment you want to change color in the light segment area to change the light segment to another color.
   Erase: Click the lamp segment whose color you want to erase in the lamp segment area, so that the corresponding lamp beads of the lamp segment will go out. (No memory function.)
   Color mixing: the lamp segment is set in two or more colors, so that the colors of the lamp beads of three adjacent IC points are mixed colors, natural colors, and mixed colors.
   Switch between different light strip color setting interfaces.
   When the whole light strip has the same static color, the brightness can be set here.

3. Scene Mode: The scene mode is divided into five sub -categories: DIV, landscape, life, festival and mood. The DIV subclass has no interface when no custom scene is added. You can make custom settings and save additions via .
   The newly added custom scene will be arranged in front of the APP default scene.
   
   ❖ Thereare44APPdefaultscenariosin four subcategories.
   ❖ Unchangeable can be selected.
   DIV scene setting interface:
   ❖ DIV scene setting can customize and save the color, motion mode, speed, direction, brightness, etc. of the light.
   ❖ DIV settings will be cleared after the device is removed.
   

4. Music mode: Rhythm mode is divided into local mode and APP mode:
   6 local rhythm modes: through the microphone radio of the controller, the light strip changes with the rhythm of the radio. 3 APP rhythm modes: keep in the current interface of the APP music mode and use the mobile phone microphone to make the light strip change with the rhythm of the radio.
   After the interface is switched, the light strip stops moving and the red light stays on.
   

5. Switch light settings: It can be set to turn on the light immediately, turn off the light, or switch the light on and off periodically.
   

NOTE

1. .Confirm the home router Wi-Fi signal type because a 2.4 GHz Wi-Fi is required to add a device.
2. Wrong password is the main reason why pairing fails. Please check your password and try again.
3. To ensure successful pairing, we suggest you enabling the following access, such as location, Wi-Fi, Bluetooth etc.
4. Please complete the pairing within three minutes after the device is reset.

Alexa Connect

1. Complete the product networking configuration in the Smart Life App Follow the instructions in the Smart Life App to complete the network configuration
   Note: In the Smart Life App configuration, change the device name to a name that is easily recognized by Alexa, usually an English name such as “bedroom light”.

2. Configure the Amazon Echo device
   **1** If you have already configured your Amazon Echo, you can skip this step, the following instructions focus on the iOS client. Make sure your Amazon Echo device is powered on and connected to a Wi-Fi net work;
   **2**Open the Alexa App on your phone, after logging in successfully, click the menu in the upper left corner of the Home page, select “Settings”, and click “Set Up a New Device” to set up the Amazon Echo device;
   
   **3** Select your Amazon Echo device type and language to connect to the Internet, press and hold the small dot on the device according to the operation prompt until the light turns yellow, and then click “Continue” to enter the connection hotspot;
   
   **4** After connecting to the Amazon Echo’s hotspot, return to the page, and the connection is successful at this time, and then click “Continue” to enter the next step, select a Wi-Fi network to connect to, and the Amazon Echo will try to connect to the network for a few minutes;
   
   **5** After the network connection is successful, click “Continue”, and an introduction video will appear. After the video is played, click “Continue” to jump to the Alexa Home page. At this point, the Amazon Echo configuration process is over.
   **1** Key Steps-Binding Skills CD Click to enter “Skills” in the Alexa App menu;
   
   **2** Then search for “ App Name ” (the name of the app you need to bind the skill to). Click “Enable” to enable the Skill;
   
   **3** After entering, enter the App account password, and then click “Link Now” to bind your App account, you can activate the Skill, and you can start your smart home journey.
   

3. Common control words
   Control your device with your voice You can now use your Echo to control your smart device. You can control your device (eg bedroom light) with the following commands:
   “Alexa, make the living room lights warmer.”
   “Alexa, set the dining room lights cooler.”
   “Alexa, set the dining room softer.”
   “Alexa, make the living room light whiter.”
   “Alexa, make the living room light warm white.”
   “Alexa, set the kitchen today light.”
   “Alexa, turn on ”
   “Alexa, turn off ”
   “Alexa, set the front porch light to blue.”
   “Alexa, set the bedroom light to red.”
   “Alexa, change the kitchen to the color blue.”
   “Alexa, set the bedroom light to fifty percent.
   “Alexa, brighten .”
   “Alexa, dim .”

Google Assistant Connect

1. Confirm that the smart device has been added to the Smart Life App and the device is online.

2. Confirm that the Google Home app is installed.

3. Click My in the lower right corner, click Google Assistant, click Connect Google Assistant.
   

4. The Smart Life App will pull up the Google Home App, click Link
   

5. Click to confirm authorization

6. Wait for the loading to complete and the smart device will be synced to Google Assistant. At this point, you can use Google Assistant or Google Home App to control smart devices. Next you can assign rooms to devices in the Google Home app.

If your phone does not have the Smart Life App installed, there is another way:

1. Open the Google Home App and tap the plus sign in the upper left corner

2. Click to set up device

3. Click Compatible with Google Service Search for Smart Life and click Smart Life

4. Click Link
   

5. At this time, the smart life app login page will open, and you can enter the account password of the smart life app to complete the authorization

Troubleshooting

• Remote control cannot be used.
  Remove the plastic foil from the remote control.

• Unable to download Smart Life APP.

• Mobile APP supports ios 10.0 or higher, Android requires Android 4.4 or higher.

• About cleaning lamps.
  Do not use polishes or cleaners on your lights, just wipe with a soft cloth or rag.

• Issue problems in using the Smart Life App.
  Open Smart Life APP, tap [Me]-[FAQ & Feedback] – [Consult]. you also can put forward your suggestions and problems, so that we can upgrade the software and better serve our customers.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: YSJ stringlights@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>