MELODYSUSIE S Series Scamander Rechargeable Nail Drill Instruction Manual

MELODYSUSIE S Series Scamander Rechargeable Nail Drill

Check before Using

1. Check the power supply cord before the first time use and during the life of the device. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
2. Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
3. Use the original charger only.
4. The handpiece of this nail drill is not compatible with other models of nail drill machines from Melody Susie and other brands. Please don’t connect the handpiece with a different nail drill machine.

Note for Battery

1. The Battery needs to be charged fully before first use to ensure optimal performance.
2. Do not overcharge the device or use it when it is charging.
3. Charge the device in well-ventilated condition at 0°C-40°C.
4. Do not charge the device close to flammable or explosive materials.
5. When charging the device, please do not cover it with clothes or other things.
6. If the device is not used for long periods of time, you should charge and discharge once every three months. In normal conditions, the battery performance will decline over several years.

Note for Using

1. To prevent electric leakage and shock or fire, do not draw out the connecting wires during use or touch the plug with a wet hand. Turn the power off after use.
2. Do not use the crooked or damaged nail drill bit or replace the bit when the power is on.
3. Do not adjust the speed abruptly, stop use once the unusual movement and noise happens.
4. Misuse, dropping or excessive force may cause device damage.
5. Minor should not use this device without parental consent and supervision.
6. Do not cover the ventilation of the handpiece avoiding burning your hand or touching any rotating part while the device is working.

Maintenance Work

1. Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
2. Do not keep the device in a metal box, car, or other place at high temperatures (more than 50°C). Keep the handpiece dry and away from oil and grease.
3. Do not store the device in a hot or humid environment. Store it in a cool and dry place.
4. Keep the electrical cord away from heated surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals or detergents.

Note for Injury

1. Having manicures done frequently can cause injuries to the nails as well.
2. If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with improper operation.
3. Do not use the device if you have an open wound on your nail or hand.
4. If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professionals before using the device.

The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If you require any technical support, please contact us. SAVE THE INSTRUCTION MANUAL

Six Drill Bits

1. ON/OFF Speed control knob
2. F/R button
3. LCD screen (It will show the RPM and the battery)
4. Portable hook
5. Handpiece fixture
6. DC socket
7. Ventilation holes
8. Handpiece connector

How to Use

• Step 1: Choose one grinding drill bit, release the handpiece, insert the drill bit at the drill head and lock it in place.
• Step 2: Rotate the ON/OFF button to turn on the device.
• Step 3: Rotate the speed control knob to accelerate or decelerate the rotation speed.
• Step 4: Change the rotation direction of the grinding drill bit on the F/R button if needed.
• Step 5: After the polishing is finished, please rotate the central barrel and take out the drill bit. The handpiece fixture could be used to place the handpiece when not in use.

How to Replace Drill Bit

Please make sure that the desired bit is suitable for the collet.

Do not move the central barrel during operation. Do not cover the ventilation holes on the handpiece, when using the device.

1. Turn the central barrel clockwise until hearing a “click” sound to release the drill bit. Taking out the blank bar. Put the desired bit into the handpiece.
2. Turn the central barrel counterclockwise until hearing a “click” sound to lock the drill bit in place.
3. Be sure to confirm the rotation of the bit and collet. Please take care of your fingers not to be hurt by the bit edge.

Charging

1. Take out the adapter and connect it to the DC Socket.
2. Connect the power supply with the adapter and insert the main plug into a wall socket.
3. The LCD screen will show the battery. When the symbol flashes, it means that the drill needs to be charged.

Problem and Terms of Settlement

Changing the nail drillbit

w hen the power is on

| ****

1. Motor burns out

2. Bearing damages

(Loud Noise)

| Turnoff the power when changing the nail drillbit.
The power is on when not in use| Turnoff the power

when not in use.

Long time, Large load

work

| ****

1. Motor burns out 2.Device lifespan shortens

3.Bearing damages (Loud Noise) 4.Handpiece damages

| Th e continuous working time should not be too long when the working condition is in heavy load. When the device is overheating,it should be stopped immediately to make it return to normal temperature.

In sert into amismatched

power supply

| ****

1. Motor burns out

| According to the device voltage requirements, insert the matching power supply.

Put the power cord at random/ Pull the power cord

| ****

1. Device lifespanshortens

2. Power cord brakes

3. Poor connection

4. E asy to cause short circuit

| ****

Donot pull the power cord.

2. Easy to cause short circuit

| Use the original

specification charger.

O ust into device

| 1. Bearing damages (Loud Noise)

2. Motor gets hot 3.Rotationalspeed slows down

4.  The potentiometer speed regulation fails

5. Handpiece damages

| ****

Clean dust,add the dust-proof protection of the dustproof hood.

Device drops to the ground or by other impacts

| 1. The ON/OFFbutton

doesn ‘ t work

2.  The potentiometer speed regulation fails 3.FIRbutton doesn’t work

4.Handpiece damages

| ****

Avoid device drops or by other impacts ( If the handpiece was damaged,it canbe purchased separately. )

Insert the nail drillbit into the device incorrectly

/Rotate the central barrel into the place incorrectly

/Take the drill bit out when the centralbarrelis locked

| ****

1. Drillbit falls out

2. High vibration 3.Drillbit stucks

4. The Handpiece stucks

and cannot be turned on

5. Handpiece damages

| Insert the naildrillbit into the device correctly/If the drill bit stucks, please release thehandpiece and try to take out it hard/Rotate the central barrel correctly.

Replace drillbit when handpiece is not completely stopped

| ****

1.The handpiece stucks and cannot be tu rn ed on 2.Handpiece damages

| ****

Donot replacedrillbit when handpiece isnot completely stopped.

Cover the ventilation holes on thehandpiece,when using the device

| ****

1. Handpiece overheats 2.Hand burns

| Do not cover the ventilation holes on the handpiece , when using the device.

Thesizeof drill bit is not suitable

| ****

1. Can not insert the drill bit into the device

| ****

Use standard drill bit.

Water into the device/Operate in wet or moist conditions/Usea wet cloth to clean the device

|

1. Motor burns out

2.  Device lifespan shortens

|

D o not operate in wet ormoist conditions/Only a dry cloth is allowed for clean in g.

Overcharge

|

1. Battery lifespan shortens

| Not exceed the

specified charg in g time

Specifications

• Input voltage range: 100-240V 50/60Hz
• Output voltage: 24V/1A
• Charging time: 2.5 hours
• E-mail: service@melodysusie.com.
• E-mail: service.uk@melodysusie.com.
• Website: www.melodysusie.com.

Warranty and Customer Service

Melody Susie offers a 6 months limited warranty on quality-related issues. Please apply for your extra 6 months warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com. if needed.
Thank you for purchasing from MelodySusie. You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.

• www.melodysusie.com.
• US Service: service@melodysusie.com.
• UK Service: service.uk@melodysusie.com.
• FR Service: service.fr@melodysusie.com.
• DE Service: servicede@melodysusie.com.
• Whipple Rd, Union City, CA 94578

AMZLAB GmbH
Laubenhof 23, 45326 Essen, Germany
THEMIS AR support Itd.
85 Great Portland St. London, United Kingdom, W1W 7LT
Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING.
To reduce the risk of burns, electrocution, fire or injury to persons. Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>