MELODYSUSIE X1 2 In 1 Nail Dust Collector Instruction Manual

MELODYSUSIE X1 2 In 1 Nail Dust Collector

Check before Using

1. Check the power supply cord before the first time use and during the life of the device. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
2. Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warrantv.
3. Use the original charger only.
4. The handpiece of this nail drill is not compatible with other models of nail drill machine from Melody Susie and other brands. Please don’t connect the handpiece with a different nail drill machine.

Note for Using

1. To prevent electric leakage and shock or fire, do not draw out the connecting wires during use or touch the plug with the wet hand. Turn the power off after use.
2. Do not use the crooked or damaged nail drill bit or replace the bit when power is on.
3. Do not adjust the speed abruptly, stop use once the unusual movement and noise happens.
4. Misuse, dropping or excessive force may cause device damage.
5. Minor should not use this device without parental consent and supervision.
6. Do not cover the ventilation of the handpiece avoiding burning your hand or touch any rotating part while the device is working.

Maintenance Work

1. Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
2. Do not keep the device in a metal box, car, or other places at high temperature (more than 50°C). Keep the handpiece dry and away from oil and grease.
3. Do not store the device in a hot or humid environment. Store it in a cool and dry place.
4. Keep the electrical cord away from heated surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals or detergents.

Note for Injury

1. Having manicures done frequently can cause injuries to the nails as well.
2. If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with improper operation.
3. Do not use the device if you have an open wound on your nail or hand.
4. If vou have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult our doctor and medical professionals before using the device.

The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If you require any technical support, please contact us. SAVE THE INSTRUCTION MANUAL

Six Drill Bits

1. Filter cover
2. Handpiece speed control button
3. ON/OFF
4. F/R button
5. Mode control
6. Handpiece jack
7. DC socket
8. Handpiece
9. Ventilation holes

How to Use

• Step 1 : Choose a drill bit, release the handpiece, insert the drill bit into the handpiece, and lock it in place.
• Step 2: Connect the handpiece to the handpiece jack.
• Step 3: Connect the power supply with the power control device in the DC socket.
• Step 4: Press the ON/OFF button to turn on the device.
• Step 5: Choose the required mode (high/low) to start working.
• Step 6: Choose “+” or “-” to accelerate or decelerate the rotation speed of the handpiece. Press the “+” or “-” for 1.5 seconds to be faster automatically to change the rotation speed of the handpiece.
• Step 7: Change the rotation direction of the handpiece on the F/R button if needed.
• Step 8: Press the ON/OFF button to turn off the device, and unplug the power adapter when you do not use it for a long time.

NOTE:

• Please turn off the power when you do not use the nail dust collector.
• When you take off the filter cover without turning off the power, the device will stop working to enter the safety protection mode and the indicator of the corresponding mode will flash. After you replaced the filter and put the filter cover back in place, it will back to work.
• The filter is reusable and replaceable, please replace it after use 2-3 months.

How to Replace Drill Bit

Please make sure that the desired bit is suitable for the collet.

Do not move central barrel during operation. Do not cover the ventilation holes on the handpiece, when using the device.

1. Turn central barrel clockwise until hearing a “click” sound to release drill bit. Taking out the blank bar. Put the desired bit into the handpiece.
2. Turn central barrel counterclockwise until hearing a “click” sound to lock drill bit in place.
3. Be sure to confirm the rotation of the bit and collet. Please take care of your fingers not to be hurt by bit edge.

Problems and Terms of Settlement

Changing the nail drill bit

when the power is on

| ****

1. Motor burns out

2. Bearing damages (Loud Noise)

| Turnoff the power when changing the nail drill bit.
Thepower is on when not

in use

| Turnoff the power

when not inuse.

Long time, Large load work

| ****

1. Motor burns out

2. Device lifespan shortens

3. Bearing damages (Loud Noise) 4.Handpiecedamages

| ****

The continuous working time should not be too long when the working condition is in heavy load. When the device is overheating, it should be stopped immediately to make it return to normal temperature.

Insert into a mismatched power supply

| ****

1. Motor burns out

| ****

According to the device voltage requirements, insert the matching power supply.

Put the power cordat random/ Pull the power cord

| ****

1.Device lifespan shortens 2.Power cord brakes

3. Poor connection

4. Easy to cause short circuit

| ****

Do not pull the power cord.

Replace the original

charger randomly

| ****

1. Device damages

2. Easy to cause short circuit

| ****

Use the original

specification charger.

Dust into device

| ****

1. Bearing damages (Loud Noise)

2. Motor gets hot

3.  Rotational speed slows

down

4. The potentiometer speed regulation fails 5.Handpiece damages

| ****

Clean dust, add the dust-proof protection of the dustproof hood.

Device drops to the ground or by other impacts

| ****

1. The ON/OFF button

doesn’t work

2. The potentiometer speed regulation fails 3.F/R button doesn’t work

4.Handpiece damages

| ****

Avoid device drops or by other impacts (If the handpiece was damaged,it can be purchased separately. )

Insert the nail drill bit into

the device incorrectly

/Rotate the central barrel into theplace incorrectly

/Take the drill bit out when the central barrel is locked

| ****

1. Drill bit falls out

2. High vibration 3.Drill bit stucks

4. The Handpiece stucks

and cannot be turned on

5. Handpiece damages

| ****

Insert the nail drill bit into the device correctly/If the drill bit stuck , please release the handpiece and try to take out it hard/Rotate the central barrel correctly.

Replace drill bit when handpiece isnot completely stopped

| ****

1.The handpiece stucks and cannot be turned on 2.Handpiece damages

| ****

Donot replaces drill bit when handpiece is not completely stopped.

1. Handpiece overheats

2. Hand burns

| Do not cover the ventilation holes on the handpiece   when using the device.
The size of drillbit is not suitable| 1. Cannot insert the drill bit into the device|

Usestandard drillbit.

Water into the device/Operatein wet or moist conditions/Use a wet cloth to clean the device|

1. Motor burns out 2. Device lifespan shortens

| Do not operate in wet or moist conditions/Onlyadry clothes are allowed for cleaning.

Specifications

• Input voltage range: 100-240V 50/60Hz
• B24V/2A
• E-mail: service@melodysusie.com.
• E-mail: service.uk@melodysusie.com.
• Website: www.melodysusie.com.

Warranty and Customer Service

MelodySusie offers a 6 months limited warranty on quality-related issues. Please apply for your extra 6 months warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com. if needed.
Thank you for purchasing from Melody Susie. You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.

• www.melodysusie.com.
• US Service: service@melodysusie.com.
• UK Service: service.uk@melodysusie.com.
• FR Service: service.fr@melodysusie.com.
• DE Service: service.de@melodysusie.com.
• Whipple Rd, Union City, CA 94578

AMZLAB GmbH
Laubenhof 23, 45326 Essen, Germany
THEMIS AR support ltd.
1 85 Great Portland St. London, Unite
Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING.
To reduce the risk of burns, electrocution, fire or injury to persons. Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.d Kingdom, W1W 7LT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>