MASCOT 19590-449 Over Trousers Instructions
- June 12, 2024
- Mascot
Table of Contents
**MASCOT 19590-449 Over Trousers Instructions
**
- Breathable, wind and waterproof with taped seams.
- Very durable.
- Ergonomically shaped trouser legs are constructed to follow the body’s natural movements.
- Elastic and drawstring waist.
- Zip on outerside of legs.
- Co-certified for use with MASCOT kneepad type SHORT or LONG, as the kneepad pocket is height-adjustable.
Technical info
Fluorescent and with reflective tapes. The fabric is highly durable,
breathable, wind and waterproof. Taped seams. Zipper openings at the front, on
both sides, so holster pockets from the trousers underneath can be pulled
through.
Ergonomically formed trouser leg. Belt loops. D-ring. Elastic and drawstring
at waist. Reinforced ruler pocket with a small pocket on the outside.
Adjustable polyester kneepad pockets.
Simple individual adjustment of kneepad pocket height. Zip with storm flap on
outerside of lower legs. Rib inside the bottom by ankles. We recommend
00418-100, 00718-100, 50454-916 & 20118-915 kneepads for this model. Co-
certified together with kneepad type SHORT or LONG in accordance with EN
14404.
User
19590-449 Over Trousers
breathable – wind- and waterproof
MASCOT® ACCELERATE SAFE
100% polyester
210 g/m²
Ripstop.Shrinkage max. 2%.The product is according to EN ISO 20471 certified to retain its qualities with 50 domestic washes.
Industrial care category C2
Certifications
Logo
You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with maximum 0,5000m² logo area.
This approved area must not be exceeded. Logo on, respectively, front or back
of the product can constitute only a maximum of 50% of the total approved logo
area in order to maintain the EN ISO 20471-certification. Note: The listed
area is only a guide to how much space is available for logo placement. In
order to maintain the product’s hi-vis class according to EN ISO 20471, the
instructions on logo size must be observed.
Logo placement:
- Workwear logo stretch. Left back pocket. Max 11X4 cm/4.3×1.5 inches
- Workwear logo stretch. Right back pocket. Max 11X4 cm/4.3×1.5 inches
- Workwear logo stretch. Vertical on left thigh, read from the bottom upwards. Max 20×5 cm/7.8×1.9 inches
- Workwear logo stretch. Vertical on right thigh, read from the top downwards. Max 20×5 cm/7.8×1.9 inches
- Workwear logo stretch. Horizontal on right thigh. Max 9X6 cm/3.5×2.3 inches
- Workwear logo stretch. Horizontal on left thigh. Max 9X6 cm/3.5×2.3 inches
- Workwear logo. Special placement. Contact to discuss further
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>