WL-9W Radio Frequency Homcloud Remote Control User Manual
- June 3, 2024
- HOMCLOUD
Table of Contents
WL-9W Radio Frequency Homcloud Remote Control
User Manual
Introduction
The Homcloud radio frequency remote control allows you to activate /
deactivate the Homcloud alarm control unit.
Alternatively, the smartphone also works as a remote control when, for
example, you are away from home.
Specifications
- Emitting frequency: 433MHz
- Emitting distance: 30-50 m
- Programme code: 1527
- Case material: ABS plastic
- Battery type: 12V27A battery
- Product dimensions: 5.431.5 cm
Homcloud code: WL-RFRC
Model n°: WL-9W
Description
- Padlock closed icon: Activates the alarm (ARM)
- Padlock open icon: Deactivates the alarm (DISARM) or stops the siren activated by some detector / sensor
- Lightning bolt icon: Stay active / active (STAY ARM) only zones selected in the Control Unit / App settings. It is normally used when, for example, you are at home and you want to activate only the external or perimeter sensors and not internally.
- Bell Icon: SOS (sends a request for immediate help, starting the siren and calls / messages if preset to the emergency contacts saved in the alarm control unit
Configurations
- (recommended) For the complete configuration of the remote control read the manual of the Homcloud Alarm Controller.
Check if battery of remote control is charged. (press a botton and see indicator led on) Enter the App in the Homcloud Alarm Control Unit already configured and select the “Add Remote controls” section, then subsequently press any botton of the remote control.
The LED light will flash again, a beep will sound (control unit) and the remote control will appear on the App ready to be used.
More info www.homcloud.com
Imported by: Life365 Italy S.p.A. – European General Agency
Viale Roma 49/a, 47122 Forlì, Italy – Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>