WL-19DW Wireless RF Homcloud Door and Window Detector User Manual
- June 3, 2024
- HOMCLOUD
Table of Contents
WL-19DW Wireless RF Homcloud Door and Window Detector
User Manual
Features
Wireless Door & Window detector adopt best technology to prevent false alarms
Built-in RF frequency antenna, longer launch distance, environmental saving,
reliable, easy to install, support low battery remind function and so on.
Homcloud code: WL-RFDS
Model n°: WL-19DW
Pilot lamp
LED lamp flash one time: alarm
Installation
Installation location need to be clean and smooth. Place them on border of
door/window you want to control. Fix with bi-adhesive both magnetic part of
the sensor. Distance between two parts need to be around 1cm
Don’t install two detectors in same place to avoid interference with each
other.
Test
A. Finished installing, check the batteries are charged, bring the two parts
of the sensor closer together until led blinks.
Configuration
- (recommended) For the complete configuration of the sensors read the manual of the Homcloud Alarm Controller.
When you have inserted the batteries and the sensor has the LED light on, enter the App in the Homcloud Alarm Control Unit already configured and select the “Add Detectors / Sensors” section, then subsequently:
Method A: Move the two magnetic parts of the sensor closer and further away from each other The LED light will flash again, a beep will sound (control unit) and the sensor will appear on the App ready to be positioned within a zone or room.
Technical parameters
Power: 3V Lithium Battery 2*AAA
Standby Current: ≤25uA
Alarm current: ≤20mA
Detection range: 1 cm
Wireless distance: ≤150m in open area
Frequency: 433mhz±75khz
Material: ABS plastic
Working humidity: ≦80% (No condensation)
More info www.homcloud.com
Imported by: Life365 Italy S.p.A. – European General Agency
Viale Roma 49/a, 47122 Forlì, Italy – Made in China