HOMCLOUD PME1606T Smart Wi-Fi Plug with Energy Monitoring Instruction Manual
- June 4, 2024
- HOMCLOUD
Table of Contents
PME1606T Smart Wi-Fi Plug with Energy Monitoring
Instruction Manual
**Parameters
**
HOmclOud cOde: AC•ER1OAE
Model: OMEI6067
Voltage:100-240V
Rated current: 16A
Rated power: 3680W
Frequency:50/60 Hz
Hereby. UMW& Italy S.p.A.. declares that this wireless device complies with
the essential requirements and other related provisions of Directive
2014/63/EU of the European Parliament and of the Council. The declaration can
be consulted on the website www.horneloud.com/doc.
‘Momsloud’ Is a registered trademark of Lite365 Italy S.p.A.
Safety Warnings
Please read this manual carefully before using this product and keep it properly for future reference.
- Indoor use only.
- Plug In fully to the wall outlet while using.
- Keep the device out of reach of children.
- Keep the device away from water, dumps, or hot environments.
- Do NOT clean with liquid.
- Do NOT exceed the recommended electrical ratings.
- Do NOT attempt to disassemble, repair or modify the device.
Important
- Our App only supports 2.4 GHz WI-Fl networks, IEEE 802.11 bifgefn (for configuration both Smart Wi-Fi plug and mobile phone need to be connected to the same Wi-FI network).
Plug Description
Light indicator
- Red light. Plug is ON
- Light off: Plug is OFF
- Greenlight rapidly blinking: Pairing mode
- Greenlight slowly blinking: AP mode
Part 1: Download and Registration
(if you have got already the HomCloud App on your mobile and an Homcloud
Account go to Part 2 – Plug Configuration).
a. Download HomCloud App from App Store or Google Play or scan OR code below.
b. Enter the register/login
interface and register with your country area code and phone number/email
address.
c. Wait a few minutes for the verification code (by email or text message) and
enter it where required along with a password (between 6 and 20 numbers and
letters)
Part 2: Plug configuration
a. Connect your mobile device to a 2.4 GHz Wi-Fi Network and launch HomCloud
App.
b. Plug-in Smart Wi-Fi Plug into any outlet and switch it on.
c. Press and hold On/Off button for 5 seconds until the light indicator
rapidly blinks.
d. On the HomCloud homepage tap “add device” or the icon “+”. After that tap
“Smart plug” on the Wi-Fi smart devices list.
e. Tap “Confirm indicator rapidly blinks”.
f. Insert or confirm Wi-Fi network name and password.
g. Wait for configuration successfully then tap tone°.
h. Rename Smart Plug and choose room name if you wish to.Please visit
www.homcloud.com/config for more info
regarding the functions of the Wi-Fi Smart Plug.
Part 3: Integration with Google Home and Amazon Alexa
Download and install Google Home or Amazon Alexa App for mobile and control
your devices with your voice with Smart Speakers* or directly with your
smartphone.
Important: If you want to link HomCloud App to Google Home or Alexa App
you need to select the ‘Smart Life’ App between the list of Google Home or
Alexa partners. (after that passage the user will be automatically directed to
HomCloud App).
Please visit www.homcloud.com/config for
more support.
- Smart speakers are to be bought separately.
FAQ
- What should I do if I can’t configure the smart plug? Make sure your mobile and smart plug are on the same 2.4 GHz Wi-Fi network.
- Which device can I control with the smart plug? You can control lights, fans, humidifiers, portable heaters, coffee makers,s and any small appliances in accordance with the smart plug’s parameters.
- What happens if the Wi-Fi goes off? You can still control the smart plug manually with the on/off button and once Wi-Fi is active again smart plug will connect automatically to your Wi-Fi network.
Please visit www.homcloud.com for more support.
Imported by: Life365 Italy S.p.A.
European General Agency ‘
Viale Roma 49/a 47122 Forli, itlay
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>