VERMEIREN Inovys II plus L70 User Manual

VERMEIREN Inovys II plus L70

Product Information

• Product Name: Inovys II + L70
• Version: D, 2022-01

Languages:

• English (EN)

• French (FR)

• Dutch (NL)

• German (DE)

• Italian (IT)

• Spanish (ES)

• Polish (PL)

• Czech (CS)

Product Usage Instructions

Before use:

Intended use:
Ensure that you use the wheelchair for its intended purpose only.

General safety instructions:
Follow these safety instructions to ensure safe usage of the wheelchair.

Symbols on the wheelchair:
Familiarize yourself with the symbols on the wheelchair and their meanings.

Transport:
Follow the recommended guidelines for transporting the wheelchair.

Storage:
Follow the recommended guidelines for storing the wheelchair when not in use.

Using your wheelchair:

Transfer in and out of the wheelchair:
Learn how to safely transfer in and out of the wheelchair.

Drum brakes:
Understand how to use the drum brakes on the wheelchair.

Comfort adjustments:
Learn how to make comfort adjustments to the wheelchair according to your needs.

Installation and adjustments:

Tools:
Gather the necessary tools for installation and adjustments.

Scope of delivery:
Understand what is included in the package when you receive the wheelchair.

Assembly:
Follow the provided instructions for assembling the wheelchair.

Instructions for specialist dealer
This instruction manual is part and parcel of the product and must accompany every product sold.

Preface

• Congratulations! You are now owner of a Vermeiren wheelchair with granule seat system!
• This wheelchair is made by qualified and committed personnel. It is designed and produced according to high quality standards, guarded by Vermeiren.
• Please read this manual carefully; it will help you to get familiar with the operation, capabilities and limitations of your wheelchair.
• If you still have questions after reading this manual, do not hesitate to contact your specialist dealer. He/she will be glad to help you.

Important note
To ensure your safety, and to prolong the lifetime of your product, please take good care of it and have it checked and serviced on a regular basis. This manual reflects the latest product developments. Vermeiren has the right to implement changes to this type of product without any obligation to adapt or replace similar products previously delivered. Pictures are used to clarify the instructions in this manual. Details of the depicted product may deviate from your product.

Information available
On our website http://www.vermeiren.com/ you will always find the most recent version of the information in this manual. Please consult this website regularly for possible updates. Visually impaired people can download the electronic version of this manual and have it read out by means of a text-to- speech software application.

• User manual of granule seat system
• User manual of Inovys II
• Installation instructions
• Service manual for wheelchairs
• EC declaration of conformity
• For user and specialist dealer
• For user and specialist dealer
• For specialist dealer
• For specialist dealer

Your product

The granule seat system L70 in combination with the Inovys II wheelchair provides the user with the utmost comfort by adjusting to the body contours.

1. Headrest
2. Brakes
3. Backrest
4. Arm pads (optional)
5. Seat
6. Leg rest

Accessories
The following accessories are available:

• Terry cover

Before use

Intended use

• The granule seat system is designed to be used in combination with the Inovys II wheelchair with T30 wheel system and frame alterations for the granule seat system.
• Indications and contraindications: The wheelchair with granule seat system is intended for passive wheelchair users, such as elderly people or people with walking difficulties or no walking abilities (e.g. paralysis, loss of limbs, limb defects or deformations, stiff or damaged joints, heart insufficiencies and poor blood circulation, balance disturbances, cachexia (decrease in muscle), …). The user has the wheelchair pushed by an attendant.
• This wheelchair is suitable for indoor and outdoor use.
• This wheelchair is designed and produced solely to transport/transfer one (1) person with a maximum weight of 135kg. It is not designed for transportation of goods or objects, nor for any use other than previously described.
• Only use accessories and spare parts approved by Vermeiren.
• Please read all technical details and limits of your wheelchair in chapter 6.
• The warranty on this product is based on normal use and maintenance as described in this manual. Damage to your product caused by improper use or lack of maintenance will cause the warranty to lapse.

General safety instructions

CAUTION

Risk of injuries and/or damage
Carefully read and follow the instructions in this manual. Otherwise you may get injured or your wheelchair may get damaged.

Keep the following general warnings in mind during use:

• As the attendant, do not operate the wheelchair if you are under influence of alcohol, medicines or other substances that may influence your riding abilities.
• Be aware that some parts of your wheelchair may get very hot or cold due to ambient temperature, solar radiation or heating devices. Be careful when touching. Wear protective clothing if the weather is cold.
• Do not modify your wheelchair in any way.

Be aware that your wheelchair may interfere with some types of anti-theft systems, depending on the settings used. This may cause the shop’s alarm to go off.

Symbols on the wheelchair

• Maximum weight of the user in kg
• Indoor/outdoor use
• Maximum safe slope in ° (degrees).
• Type designation

Transport
Follow the instructions for the Inovys II wheelchair concerning transport.

Storage
Make sure that your wheelchair is stored in a dry environment to prevent mould from growing and the upholstery from being damaged, see also chapter 6.

Using your wheelchair

WARNING

Risk of injuries

• First read previous chapters and inform yourself about the intended use. Do NOT use your wheelchair unless you have read and fully understood all instructions.
• In case of doubts or questions, do not hesitate to contact your local specialist dealer, your care provider or technical adviser to help you with this.

Transfer in and out of the wheelchair

CAUTION

Risk of injuries

• In case you cannot perform the transfer in a safe manner, ask someone to assist you.
• Do not stand on the footplates.

1. Position the wheelchair as close as possible to the chair, couch or bed to/from you wish to transfer.
2. Make sure that both brakes of the wheelchair are activated.
3. Fold the footplates upwards to prevent standing on them.
4. Transfer to/from the wheelchair with the help of an attendant or lifting equipment.

Correct position in the wheelchair
Some recommendations for a comfortable use of the wheelchair:

• Position your backside as close as possible to the backrest.
• Make sure your upper legs are horizontal.

Drum brakes

CAUTION

Risk of injuries

• Make sure that the wheelchair is on a flat horizontal surface before releasing the brakes.
• Never release both brakes simultaneously.
• To park or stop on a slope, use the parking brakes after coming to a halt.
• Brakes may only be adjusted by your specialist dealer.

To operate the drum brakes:

1. Pull the brake levers (1) in a squeeze motion.
2. Each brake lever (1) can be blocked by pushing the lock lever (2) down with your finger.
3. Release the brake levers (1).

To move/ride again:

1. Pull the brake levers (1) in a squeeze motion. The lock lever (2) is released by this movement.
2. Hold the handgrips firmly, while releasing the brake levers (1).

Comfort adjustments

Backrest and seat inclination
The seat inclination and backrest inclination can be adjusted simultaneously or separately by an attendant. Make sure that the patient sits in the chair when the attendant adjusts the backrest inclination and that the wheelchair does not tip over.

Seat inclination:

1. Squeeze the lever (3) on the left handle (see label) towards the handle to adjust the seat inclination.
2. Pull/Push the seat in the desired position (0° to + 30°), the gas pressure spring shall be pressed in/out.
3. Loosen the lever (3) to block the gas pressure spring.

Backrest inclination:

1. Squeeze the lever (3) on the right handle (see label) towards the handle to adjust the angle of the backrest.
2. Pull/Push the backrest in the desired position (0° to + 45°), the gas pressure spring shall be pressed in/out.
3. Loosen the lever (3) to block the gas pressure spring.

Leg rest inclination
The leg rest is adjustable in 6 positions.

1. Slightly loosen the star knob (4) on both sides of the leg rest.
2. Lift/Lower the leg rest until the desired angle is reached.
3. Tighten the star knobs (4) again firmly.

Footplate angle
The footplate is adjustable in 3 positions.

1. Slightly loosen the star knob (5) on both sides of the footplate.
2. Turn the footplate up/down until the desired angle is reached.
3. Tighten the star knobs (5) again firmly.

Headrest
The headrest is fully adjustable in height and angle. To alter the position of the headrest: loosen any lever/star knob as specified below, adjust the headrest to the desired position, and retighten firmly.

• [6] To adjust the headrest sideways.
• [7] To rotate the headrest (360°).
• [8] To adjust the headrest forward/backward.
• [9] To adjust the height of the headrest.

To remove the headrest, loosen lever (9) and lift the headrest out of the support.

Installation and adjustments

CAUTION

Risk of injuries or damage

• The wheelchair needs to be (dis)assembled and adjusted by a specialist dealer according to the instructions in this chapter.
• Only use parts and tools described in this manual.
• While (dis)assembling and operating the wheelchair, make sure no objects or body parts get caught between moving parts.
• Make sure all screws are firmly secured before driving.

Important remarks

• Be aware of the technical details and limits of intended use.
• For more information, contact Vermeiren.

Tools
To (dis)assemble and adjust the wheelchair, the following tools are needed:

• Allen keyset n° 4

Scope of delivery
The following items are part of the delivery:

• Framework with seat, backrest, wheels, armrests, leg rest, and L70 granule seat system
• Headrest
• User manual

Before use, check if everything is included and that no products are damaged. Please note that the basic configuration may differ in different European countries. Contact your specialist dealer.

Assembly
The wheelchair is delivered fully assembled except for the headrest, the side support pillows of the backrest and seat, and the optional arm pads.

• The headrest can be mounted and adjusted according to the instructions in §3.3.4 .
• The pillows are easy to attach by means of the zippers. The label on each pillow indicates the specific place and direction of the pillow (see examples below).

Adjustments

Leg rest length
The length of the leg rest can be adjusted in 4 positions.

1. Take off the L70 granule cushions (1) from the leg rest frame.
2. Remove the lower foam protection (2) from the leg rest tubes.
3. Loosen and remove the screw-nut connection (3) on both sides of the leg rest.
4. Move the inner tubes with foot plate up/down in the outer frame tubes until the desired length is reached.
5. Replace the screws (3) and tighten firmly by hand.
6. Replace the foam protection (2).
7. Reattach the granule cushions (1) to the leg rest frame.

Maintenance

Observe the maintenance instructions in the manual of Inovys II.

Points of maintenance

CAUTION
Risk of injuries and damage

Repairs and replacements may only be undertaken by trained persons and only genuine replacement parts of Vermeiren should be used.

• The service frequency depends on the frequency and intensity of use. Contact your dealer to agree to a common timetable for inspection/maintenance/repair.
• For the maintenance manual, refer to the Vermeiren website: www.vermeiren.com.

Before each use

Inspect the following points:

• All parts: Present and undamaged or unworn.
• All parts: Clean.
• Seat, calf rests, arm pads, footplates: Well secured.
• All zippers: closed.
• Condition of frame parts: No deformation, instability, weakness, or loose connections
• Seat, backrest, arm pads, footrest, and headrest: No excessive wear (like dented spots, damage, or tears).
• Brakes: Undamaged and functioning.

Contact your specialist dealer for possible repairs or part replacements.

Yearly or more often
Have your wheelchair inspected and serviced by your specialist dealer, at least once a year, or more often. The minimum maintenance frequency depends on use and should therefore be commonly agreed upon with your specialist dealer.

Maintenance instructions

Cleaning
The granule seat cushions can be cleaned with a damp cloth (not drenched), and mild household soap if necessary. The teddy covers can be machine washed at 60° C. Do not use abrasive cleaning agents.

Expected lifespan
The average lifespan of your wheelchair is 5 years. Depending on the frequency of use, driving circumstances and maintenance, the lifespan of your wheelchair will increase or decrease.

Reuse
Before each reuse, have the granule seat system disinfected, inspected and serviced according to the instructions in the Inovys II manual.

End of use
At end of life, you need to dispose your wheelchair according to the local environmental legislation. The best way to do so, is to disassemble the wheelchair to facilitate the transport of recyclable parts.

Technical specifications

Technical terms below are valid for the wheelchair in standard settings. If other footrests/armrests or other accessories are used, the tabulated values will change.

Description| Min. dimensions| Max. dimensions
Overall length with footrest| 1280 mm
Effective seat width| 450 mm| 500 mm
Overall width| 680 mm| 730 mm
Overall height (without headrest)| 990 mm| 1060 mm
Total mass| 38 kg
Mass of heaviest part| 33 kg
Masses of parts that can be dismantled or removed| Armrests: 3,2 kg ; Headrest: 1,85 kg
Static stability downhill| 10° (in standard configuration)
Static stability uphill| 15° (in standard configuration)
Static stability sideways| 12° (in standard configuration)
Obstacle climbing| 60 mm
Seat plane angle| 0°| 30°
Effective seat depth| 460 – 520 mm
Seat surface height at front edge| 510 mm| 580 mm
Backrest angle| 0°| 45°
Backrest height| 550 – 600 mm
Distance between footrest and seat| 360 – 385 – 410 – 435 mm
Angle between seat and footrest| 17° – 85°
Angle between leg footrest and footplate| 73° – 107°
Distance between arm pad and seat| 220 mm| 320 mm
Front location of arm pad structure| 460 mm| 490 mm
Horizontal location of axle (deflection)| -8 mm| 41 mm
Minimum turning radius| 1500 mm
Diameter PU Rear wheels| 16”
Diameter PU steering wheels| 200 mm
Storage and use temperature| + 5 °C| + 41 °C
Storage and use humidity| 30%| 70%
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / 1,5°

Service registration form

This product (name): ……………………………………..
was inspected (I), serviced (S), repaired (R) or disinfected (D):

By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

---|---|---
By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

| By (stamp):

Kind of work: I / S / R / D Date:

Vermeiren GROUP
Vermeirenplein 1 / 15 2920 Kalmthout BE.

website: www.vermeiren.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>