Neomounts FPMA-D750D Monitor Arm Desk Mount Instruction Manual
- June 12, 2024
- Neomounts
Table of Contents
Neomounts FPMA-D750D Monitor Arm Desk Mount
Product Information
The FPMA-D750DBLACK2/SILVER2/WHITE2 is a monitor desk mount designed to
securely hold your monitor in place. It is compatible with monitors that have
VESA mounting holes of 75×75 or 100×100 mm.
The mount can support monitors weighing between 2 to 8 kg and has an
adjustable height range of 20 to 53 cm.
The package includes the following parts:
- A Clamp (x2)
- B Grommet (x1)
- C (x1)
- D (x1)
- E (x8)
- F (x3)
Product Usage Instructions
- Step 1: Depending on your preference, choose either the A Clamp or B Grommet to attach the mount to your desk. Use the provided screws to secure the clamp or grommet in place.
- Step 2: Attach the VESA plate to the back of your monitor using the provided screws.
- Step 3: Place the monitor onto the mount and align the VESA plate with the mount’s bracket. Secure the VESA plate to the bracket using the screws.
- Step 4: Adjust the torques on the mount to ensure that the monitor stays in the desired position. Use the provided tool to make the adjustments.
- Step 5: Once the torques are set, tighten the screws to secure the monitor in place.
- Step 6: Adjust the height of the monitor by loosening the screws on the mount and sliding it up or down. Once in the desired position, tighten the screws to lock the height adjustment.
- Step 7: Your monitor is now securely mounted on the desk mount and ready for use.
Please refer to the user manual for additional information and safety precautions.
TOOLS
PARTS
STEP 1 A Clamp
- Install the clamp to the desk
STEP 1 B Grommet
- Install the grommet through the desk
STEP 2
- Mount the desk clamp/grommet to the monitor arm
STEP 3
- Attach the VESA plate to the monitor
STEP 3
- Attach the VESA plate to the monitor
STEP 4
- Adjust the torques
STEP 5
- Adjust the gas spring
STEP 6
- Run the cable through the cable cover
STEP 7
- Adjust the mount to the desired position
CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
Documents / Resources
|
Neomounts FPMA-D750D Monitor Arm Desk
Mount
[pdf] Instruction Manual
FPMA-D750DBLACK2, FPMA-D750DSILVER2, FPMA-D750DWHITE2, FPMA-D750D Monitor Arm
Desk Mount, Monitor Arm Desk Mount, Arm Desk Mount, Desk Mount, Mount
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>