Neomounts FPMA-D750 Wall TV Bracket Instruction Manual

Neomounts FPMA-D750 Wall TV Bracket

Product Information

The FPMA-D750 is a monitor desk mount designed to securely hold monitors with VESA mounting patterns of 75×75 mm or 100×100 mm. It is suitable for monitors weighing between 2-8 kg and with screen sizes ranging from 19-49.8 cm. The mount allows for height adjustment of up to 53 cm, providing flexibility and ergonomic positioning options for the user. For more information and support, visit www.neomounts.com

Product Usage Instructions

1. Step 1: Choose the appropriate mounting option based on your desk setup.
2. For desk clamp mounting:
3. Attach part A to the desk by tightening the clamp.
4. Attach part C to the VESA plate using the screws provided.
5. Attach part D to the back of the monitor using the screws provided.
6. Attach part E to the VESA plate and part D, securing them together.
7. Attach part F to the VESA plate and part A, securing them together.
8. For grommet mounting:
9. Insert part B through the grommet hole in the desk.
10. Attach part C to the VESA plate using the screws provided.
11. Attach part D to the back of the monitor using the screws provided.
12. Attach part E to the VESA plate and part D, securing them together.
13. Attach part F to the VESA plate and part B, securing them together.
14. Step 2: Attach the VESA plate to the monitor.
15. Refer to the instructions in your language for detailed steps on attaching the VESA plate to the monitor.
16. Step 3: Adjust the torques.
17. Refer to the instructions in your language for detailed steps on adjusting the torques of the mount.
18. Step 4: Enjoy your securely mounted monitor!

TOOLS

PARTS

STEP 1 A Clamp

• Install the clamp to the desk

STEP 1  B Grommet

• Install the grommet through the desk

STEP 2

• Mount the desk clamp/grommet to the monitor arm

STEP 3

• Attach the VESA plate to the monitor

STEP 4

• Adjust the torques

STEP 5

• Adjust the gas spring

STEP 6

• Run the cable through the cable cover

STEP 7

• Adjust the mount to the desired position

CAUTION

1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
4. It is recommended that the mount be installed by qualified personnel only.
5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.
6. Please carefully inspect the area where the mount is to be installed:
   • Avoid places that are subject to high temperatures, humidity or contact with water.
   • Do not install the product near air conditioning vents or areas with excess dust and fumes.
   • Only install on vertical walls and avoid slanted surfaces.
   • Do not install in places subject to any shock or vibration.
   • Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
7. Maintain sufficient space around the display to ensure adequate ventilation.
8. To ensure a safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
9. The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.
11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
12. Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
13. Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
14. Please consult the English language manual for any dispute on conditions.

WWW.NEOMOUNTS.COM

Documents / Resources

| Neomounts FPMA-D750 Wall TV Bracket [pdf] Instruction Manual
FPMA-D750BLACK2, FPMA-D750SILVER2, FPMA-D750WHITE2, FPMA-D750 Wall TV Bracket, Wall TV Bracket, TV Bracket, Bracket
---|---

References

• Neomounts

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>