Neomounts DS70-750BL1 Monitor Arm Desk Mount Instruction Manual

Neomounts DS70-750BL1 Monitor Arm Desk Mount

Product Information

• Product Name: DS70-750BL1
• Manufacturer: Neomounts
• Website: www.neomounts.com
• Supported VESA Sizes: 75x75mm, 100x100mm
• Weight Capacity: 2-7 kg
• Height Adjustment Range: 7.3-48.1 cm
• Tilt Adjustment Range: 0-37.8 cm

Monitor desk mount

PARTS

DIMENSION

Instructions

1. Step 1: Installation
2. A. Clamp: Install the clamp to the desk or table by following the provided instructions in your language.
3. B. Grommet: Install the grommet to the desk or table by following the provided instructions in your language.
4. Step 2: Mount Assembly
5. Attach the arm to the support
6. Step 3: Gas Spring Adjustment
7. Slide the bolts into the top holes of the VESA plate and tighten the bolts. Attach the other 2 bolts in the lower part of the VESA plate
8. Step 4: VESA Plate Attachment
9. Adjust the gas spring
10. Step 5: Position Adjustment
11. Route the cable(s) through the cable clips
12. Step 6: Final Adjustments
13. Adjust the mount to the desired position

CAUTION

1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
3. The mount is designed for easy installation and removal. The manufacb.Jrer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
4. tt is recommended that the mount be installed by qualified personnel only.
5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.
6. Please carefully inspect the area where the mount is to be installed:
   • Avoid places that are subject to high temperab.Jres, humidity or contact with water.
   • Do not install the product near air conditioning vents or areas with excess dust and fumes.
   • Only install on vertical walls and avoid slanted surfaces.
   • Do not install in places subject to any shock: or vibration.
   • Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
7. Maintain sufficient space around the display to ensure adequate ventilation.
8. To ensure safe installation, first check the structure of the wall. ceiling or floor and select a secure mounting location.
9. The wall. ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.
11. Tighten all saews (do not exert excessive force to avoid breaking the screw or damaging its thread).
12. Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
13. Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
14. Please consult the English language manual for any dispute on conditions.

Please refer to the complete user manual for additional information and safety precautions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>