OLIGHT OP1 Odin Rechargeable LED Flashlight Warnings Instructions

OLIGHT OP1 Odin Rechargeable LED Flashlight Warnings

Product Information

The product is manufactured by Olight E-Commerce Technology Co., Ltd and is made in China. It is a pen with a tip light and a charging function. The pen has a flashlight feature as well. The product comes with safety warnings that must be read and followed to prevent any damage or injuries.
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE!

DANGER
Don’t leave the light in a car where inside of temperature may be over 60°C, or in similar places.

WARNING
Do not short the charging port with metallic object intentionally.

CAUTION

• Do not look directly at the light source or shine to eyes, may cause temporary blindness or permanent damage to the eyes.
• Do not block the light outlet at close range, the energy emitted from the light may cause the object to burn.
• Do not remove or replace the built-in battery of the charger by self.

NOTICE

• Do not soak in water: the ink will become diluted or unable to write after being dissolved in water.
• Beware of dropping: The pen tip will lose its writing function if it is impacted, or even leak ink.
• Please use the pen ink provided by Olight. Using other brands may cause malfunction of the pen tip light and charging function.
• If the product gets wet, please wait until it is dry before activating the pen tip light or it may cause damage.
• Please clean the internal pin of the charging base and the surrounding debris periodically to prevent the inability to charge.
• Please regularly clean the tip of the pen to allow the light to function properly.
• The battery life will be shortened when both the pen clip light and the pen tip light are lit simultaneously.
• Do not disassemble the product.
• The pen clip clamps objects at a maximum thickness of 3mm. The clip may be deformed when it exceeds this thickness and loses its due performance.
• Do not put a hot light into any type of fabric bag or fusible plastic container.
• Do not activate the maximum brightness mode multiple times continuously to prevent the high temperature on the surface.
• When the light gets hot, please switch it to low brightness mode, or shut off the flashlight temporarily.

REMARK

• Before long term storage, please fully charge the product.
• The maximum brightness level can only be used when the remaining battery power is sufficient to do so.
• Operating time in Turbo or high mode varies with ambient temperature and heat dissipation conditions, better heat dissipation longer runtime.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

Dongguan Olight E-Commerce Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road,
Changan Town, Dongguan City, Guangdong, China.
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>