Neomounts FPMA-D550DBLACK Monitor Desk Mount Instruction Manual
- June 12, 2024
- Neomounts
Table of Contents
Neomounts FPMA-D550DBLACK Monitor Desk Mount
Product Information
The FPMA-D550DBLACK is a monitor mount designed to securely hold screens ranging from 10mm to 88mm in size. It comes with various parts and accessories, including a clamp, grommet, VESA plate, and cable clips. The mount has a weight capacity of up to 8 kg and offers adjustable height and tilt options for optimal viewing angles.
Product Usage Instructions
- Step 1: Identify the parts listed in the manual, including A, B, C, D, E, F, G, H, I, J, K, L, M, N.
- Step 2A: Mount the clamp to the rod and install it on the desk. Use the provided screws (M-A, M-B) to secure the clamp.
- Step 2B: Mount the grommet to the rod and install it through the desk. Ensure the grommet is securely attached.
- Step 3: Attach the arm to the rod and adjust the height as desired. Tighten the arm to secure it in place.
- Step 4: Attach the VESA plate to the monitor using the provided screws (M-C, M-D). Ensure the plate is securely fastened.
- Step 5: Attach the screens to the bracket and secure them using the appropriate screws (M-E, M-F).
- Step 6: Route the cable(s) through the cable clips for organized cable management. Insert the Allen keys into the slot for future use.
- Step 7: Complete the installation by following any additional instructions provided in the manual.
Please refer to the user manual for further details and illustrations on the installation process.
Monitor desk mount
PARTS
ASSEMBLY
STEP 1
Place the decorative cover
STEP 2
A Clamp
Mount the clamp to the rod and install to the desk
B Grommet
Mount the grommet to the rod and install through the desk
STEP 3
Attach the arm to the rod, adjust the height and tighten
STEP 4
Attach the VESA plate to the monitor
OPTION
Use spacers if necessary
STEP 5
Attach the screens to the bracket and secure them
STEP 6
Route the cable(s) through the cable clips and insert the Allen keys into the
slot for future use
STEP 7
Adjust the mount to the desired position
CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>