LENA LIGHTING Coria 2 LED Round LED Luminaire Instruction Manual
- June 12, 2024
- LENA LIGHTING
Table of Contents
LENA LIGHTING Coria 2 LED Round LED Luminaire
Product Information: – Product Name: CORIA 2 NATYNK / MULTI – IP Rating:
IP44 – Voltage: 220-240 V – Frequency: 50/60 Hz – Luminous Flux: 1750lm –
3000lm – Dimensions: A = 109 mm, B = 109 mm
Product Usage Instructions: 1. Ensure that the power supply is switched
off before starting the installation process. 2. Determine the desired
location for installing the CORIA 2 NATYNK / MULTI light fixture. 3. Mount the
fixture on a suitable surface using the provided screws or mounting brackets.
4. Connect the electrical wires to the corresponding terminals, following
standard electrical wiring practices. 5. Once the wiring is complete, ensure
that all connections are secure and insulated properly. 6. Turn on the power
supply and test the functionality of the CORIA 2 NATYNK / MULTI light fixture.
Product Information: – Product Name: CORIA 2 ZWIESZANA – IP Rating: IP40
– Voltage: 220-240 V – Frequency: 50/60 Hz – Dimensions: A = 109 mm, B = 109
mm
Product Usage Instructions: 1. Make sure that the power source is turned
off before starting the installation process. 2. Select a suitable location
for installing the CORIA 2 ZWIESZANA light fixture. 3. Use appropriate hanging
hardware or suspension cables
to mount the fixture securely. 4. Connect the electrical wires to their
respective terminals, adhering to standard electrical wiring guidelines. 5.
Double-check that all connections are properly insulated and tightened. 6.
Restore power to the fixture and verify
its functionality by turning it on. Please note that these instructions are a
general guide, and it’s recommended to refer to the complete user manual for
specific installation details and safety precautions.
IP40
POWER
DIMENSIONS
INSTALLATION
The light source used in this luminaire should only be replaced by the manufacturer or his maintenance representative, or a similarlv aualified person.
Dirtiness that settle down on the diffuser due to normal operation of the fitting shall be cleaned with a damp cloth. Do not use abrasive cleaners.
IP44
POWER
INSTALLATION
MULTILED VERSION
The light source used in this luminaire should only be replaced ov the manufacturer or his maintenance representative. or a similarly qualified person.
Assembly should be carried out by a qualified person
Dirtiness that settle down on the diffuser due to normal operation of the fitting shall be cleaned with a damp cloth. Do not use abrasive cleaners.
We would like to inform you that our products are marked in accordance with
the European Directive 2002/96/CE and Polish Act on used electric and
electronic equipment with a sign of a crossed-out waste container:
This mark informs abort the fact that the device, after its application use,
cannot be placed together with other types of household waste. The user is
obliged to return it to the entities conducting a collection of used electric
and electronic equipment. The collection points, including local collection
points, shops and municipal entities create a proper system making it possible
for the return of the equipment. Proper proceeding with used electric and
electronic equipment contributes to the avoidance of damaging consequences for
the health of the inhabitants and natural environment chick result form the
presence of dangerous substances and improper storage and processing of such
devices and equipment.
Data aktualizacji/Date of issue: 29.05.2023 INDEKS: 340CL401
LENA LIGHTING S.A.
ul. Kornicka 52, 63-000 Sroda Wikp. POLAND
tel. +48 61 28 60 300
e-mail : office@lenalighting.pl
www.lenalighting.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>