FLYSKY T-6819B 2.4GHz Transmitter Instruction Manual

FLYSKY T-6819B 2.4GHz Transmitter

Introduction

Thank you for choosing the 2.4G radio remote control digital products. This product manual provides important information on the usage of the transmitter. Please read this statement carefully and strictly follow the operational requirements. If you encounter any issues during operation, refer to this manual for assistance. Keep the manual stored for future reference.

Safety Guides

• Always operate the transmitter in a safe manner to prevent accidents.

2.4GHz System

The T-6819B transmitter utilizes the AFHDS (automatic frequency hopping digital system), which is developed by FLYSKY and patented by FLYSKY. This system is designed for Radio Control model enthusiasts, offering excellent anti-jamming capabilities, low power consumption, and high receiver sensitivity. FLYSKY AFHDS is considered one of the best systems available in the market.

Specifications:

• Frequency range: 2410-2470MHz
• RF power: less than 10dBm (10mW)
• Modulation type: GFSK
• Antenna Type: Integral
• Antenna gain: 2.69dBi

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
3. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Introduction

Thank you for choosing 2.4G radio remote control digital products, if you are the first time to use this type of products, please read this statement carefully and strictly in accordance with the requirements of the operation. You could refer to the manual if you meet any problems during the operation. Please well keep the manual after use because you might have to use it again next time. Once again, thanks for buying our products.

Satey Guides

• Don’t fly in night, in bad weather such as rainy or thundery days. It will interfere the transmitter signal. Thereby it will create out-of-control and unexpected accidents.
• Before you fly, please make sure the movement of the server correspond with the direction of joysticks. If inconsistent, please adjust before fly.
• You need to turn the throttle channel(ch2) and inching the switch to the lowest before you use. Then switch on the transmitter power, and finally connect the receiver.
• The sequence to shutdown is that turn off the receiver power first, and then the transmitter power.
• If the above operations are reversed, it might lead to uncontrolled and cause an Accident.

2.4GHz system

AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the best systems available in the martet.

Specifications

Frequency range: 2410-2470MHz RF power: less than 10dBm(10mW); Modulation type: GFSK;

• Antenna Type : Integral
• Antenna gain : 2.69dBi

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
3. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>