REDRAGON M693-RGB 2910 Wired 2.4G BT Gaming Mouse Instruction Manual

REDRAGON M693-RGB 2910 Wired 2.4G BT Gaming Mouse Instruction Manual

Dear user

Thank you for choosing our REDRAGON product. To protect your rights and for better customer service, we ask that you note our warranty rules.

1. Within guaranty period, repair is guaranteed for failure due to electrical circuit problems. Other damages, such a disassembly, hard impacts,submersion into water, plugging into improper currentor voltage, and damage caused by natural disasters such as fire, flood,or erthauake are ot included:
2. Consumable parts (such as foot pad) and spare parts replacement are not included in our warranty,

0S Support

Windows XP/Vista/Win 7/ Win 8/Win 10/Win 11

Installation

Plug Nano receiver to USB port on your comper, Make sure the switch on bottom of mouse was set s ON mode. Press any key to get mouse ready to work.

Charging your mouse

The battery indicator LED locate under the scrollwhee key, s fash sowly in RED while gaming meuse s out of power,please connect the mouse and computer withthe type C US8 cable, thecharging time s around 2 hours it s workable whle harging

Wake up your wireless mouse

To save power, Mouse was program withasleeping mouse whenitis out of workor minutes, Plase pres anykey o wake up the mouse

Wired connecting

Find th type C U cable in the packaging, witch the morde button to OFF (Located at mouse bottom),plug the mouse to PC by cable for wired connection, it charging at he came ime

Pairing in 2.4G mode

Find USB Nano receiver in packaging, switch the mode button(Located at mouse bottom) 10246, plug the receiver to PC USB port, press any key of mouse for activity.

Reconnection

Both of mouse and Nano receiver has a built-in code, It can be setting one mouse to one. receiver, orfew of mouse to one recelver. Mouse and receiver need to reconnect under the condition of High temperature, high magnetic, strong vibrate. Plug offnano receiver from USB port, and plug it on Keep the mouse in 50cm with receiver, re-store the battery, put the switch at “OFF’, press and hold right key and scroll key for three seconds. Connection completely.

Pairing in bluetooth mode

Switch the mode bt to BT ocated a battom of mousel, press and hold mouse pai button (Right next to mode button lfr 3 seconds,scan the device on PC/tablet/notebook MAC, ind the mouse device name M693 for pairing

Button Instructions

1. Left mouse button. 2.Right mouse button.

2. scroll wheel (click as middle mouse button).

3. side key, defaulted function: FORWARD key on the keyboard.

4. Side key, defaulted function: BACKWARD key on the keyboard.

5. DPI+ button (defaulted to speed up the cursor),

6. DPI button (defaulted to slow down the cursor).
   Button Instructions

7. Teflon foot pads: Large wear-resistant materials let the mouse move more smoothly.
   

DPI adjustment Instructions

User mode ndicatoright:Located below the ScrollWheel key.

Blue -~ Gear 2 (1000 DPI)
Green -~ Gear 3 (2000 DFI)
Purple — Gear 4 (3000 DPI)
Yellow — Gear 5 (8000 DPI)

Software Instructions

User can adjust the fllowing settings though the software after downioading and installing it.

1. Adjust the DPIof the mouse atthe user’s discretion. range: 5004000 DPY)
2. Adjust the polingrate othe mouse a the user’sdicreton,(ange: 125HZ 250HZ: S00HZ-100012)
3. Macros: Record up to 59 actions and trigger with one key.
4. Continuous keystroke function: Set the number of clicks and delay time.
5. Customized 7 mouse buttons.
6. Customized RGE backlight in patterns/brightness/speed.

FAQ

1. If the mouse s not responding, please check whether the mouse is plugged correctly in the corresponding computers USB port, or try another USB ports
2. If the mouse is moving slowly, jumping or with delay, please try another surface. Dark, dirty, un-flat, bright surfaces may affect the performance of mouse. Mouse pad strongly recommended.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide. reasonable protection against harmful interference in a esidential installation. This equipment generates uses and can radiate radio frequencynergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occurina particular installation. f this equipment does cause harmful interference to radio o television reception, which can be determined by turning the equipment off and on, the user s encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna,
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful Interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

California Proposition 65

WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure – www.P65Warnings.ca.gov.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>