beok-controls TOL47 Series Thermostat User Guide
- September 5, 2024
- BEOK CONTROLS
Table of Contents
TOL47 Series Thermostat
“`html
Specifications
- Model: TOL47 Series Thermostat
- Usage: Water heating, electric heating, gas boiler
- WP: Water heating 3A
- EP: Electric heating 16A
- WPB: Linkage; M: Gas boiler 3A
Product Information
This thermostat is designed for use in water heating, electric
heating, or gas boiler systems. It ensures a suitable temperature
environment for your daily needs.
The package includes the thermostat host, manual, external
sensor cable (EP model only), screws, and a qualification
certificate.
Product Usage Instructions
-
Read the manual carefully before installing or using the
thermostat. -
For installation, it is recommended to seek professional help
to ensure proper setup. -
Operate the thermostat within the legal guidelines specified
for its use.
FAQ
Q: Can this thermostat be used for cooling systems?
A: No, this thermostat is specifically designed for water
heating, electric heating, or gas boiler systems and is not
suitable for cooling purposes.
Q: Is it necessary to have an external sensor cable for all
models?
A: No, the external sensor cable is only included for the EP
model. Other models do not require it for operation.
“`
TOL47 Series Thermostat User Guide
This thermostat is used for water heating,electric heating,or gas boiler.
Welcome
Thank you for your trust and support!
We have adopted advanced technology and perfect craftsmanship so that your new
thermostat will provide you with a sutable temperature environment every day
in the future.
For detailed instructions on installing and using this thermostat, please read
this manual carefully. Please get in touch with a professional to install the
thermostat for you.
Besides, please install and use this product within the scope of the law.
Product Packaging
Thermostat host Manual
1PC 1PC
External Sensor Cable (only EP model) 1PC
Screw
2PCS
Qualification certificate 1PC
Product Parameters
WP :Water heating 3A
EP: Electric heating 16A
WPB:Linkage; M:Gas boiler 3A
Electrical Specifications
1.Temperature Sensor :NTC 2.Temperature hysteresis:±1 (default) (Adjustable
±0.5~±9.9°C) 3.Display screen: LCD 4.Working environment:-5-50°C (default)
5.Display range: 0-51°C (default) 6.Temperatures Setting:5-60°C (default) 7 .
Vo l t a g e : A C 1 0 0 – 2 4 0 V, 5 0 / 6 0 H z 8.Load current:water heater
3A; electric heater 16A;gas boiler 3A; 9.Self-consumption power:<1W
Wiring Diagram
WP:water heating (External sensors cannot be connected)
NTC
EP:for electric heating;
WPB for gas boiler (for boilers connected via dry contact)
Installation Procedure
1.Connect the power box according to the wiring diagram.
2.Separate the power supply from the control board cable.
3.Screw the power supply into the box of 86.
4.Connect the power board to the control board line, and align the
buckle at 30 degrees to complete
the installation.
Adaptable mounting box: 86x86mm square mounting box
60mm European round box
Description of display & Icon
Operating Instruction
1.Power on/off: press to turn on/off the thermostat . 2.Press the M key to
switch between Manual and Auto mode
3.In the Auto mode,press and key to adjust the setting temperature.It will
enter temporary auto mode and will resume auto mode at the next programming
session.
4.Press the key to enter the clock setting, press the mode key M to switch the
setting options, and press the and key to adjust each parameter value.Note:
The time of the WIFI model will automatically obtain the Internet time.
5.Simultaneously press and hold the and keys for 5 seconds to add or cancel
the childlock.
6.WIFl link:When the thermostat is turned on, press and hold the button for 5
to 8 seconds,the WIFI icon flashes on the thermostat display,and the thermost
enters the code matching state.
Weekly Programming Guide
Long press the M key to enter the programming setting,short press the M key to
switch options, press the or key to adjust the parameters of each option,and
press the key to exit and save setting.
Advanced Option Setting
When Power Off, press the M key and the key for 5 seconds to enter the
advanced setting.Press the M key to enter the next option,then press the and
key to adjust
Then press the key to exit the advanced option setting.
01
temperature
The default value of the calibration room temperature is-1.5 Press the or key
calibration to adjust it within the range from 9.9to-9.9
The temperature sensor selection
defaults to IN. Press the key or the key to
adjust it
Sensor
IN:Use the internal sensor
02
selection
OUT:Use the external sensor
ALL: Use both internal and external sensors.
Please note: If no external sensor is conne-
cted,do not set it to ALL or OUT,otherwise
Er will appear on the screen.
03
Measured temperature
The limit temperature value is 60 by default Press the or key to adjust it within the
extreme value Modification
range from 35 to 60
04
Temperature hysteresis
The default setting temperature hysteresis is 1; press the or key to adjust it withinthe range from0.5 to 10.
05
Antifreeze function
Set the antifreeze function as OFF by default press the key to turn on the antifreeze function
Holiday option 5: Saturday,Sunday as rest day
and turn off 6:Sunday as rest day
06
weekly
7:No rest day
programming OFF:Turn off the programming
Set the main and auxiliary reverse to 00 by
Main and auxili defaul.Press the key or key to adjust
07 reverse selection
00 main reversal 01 to indicate the auxiliary reverse. Note:Adjustments are not recommended for
non-professionals
08
Backlight brightness
00:turn off the backlight 01:low brightness 02:medium brightness 03:high brightness (only WiFi model)
09
Set temperature upper limit
Set the upper limit of the temperature to 60 press the key or key to adjust it within the range from 15 to 95
Set to restore factory setting.The default
10
Reset
display is-,press the key to display “—”
and press the key to restore the factory
setting
WIFI Connection
Preparation before Wi-Fi connection
APP download and account registration:
1. Download APP Search for “Tuya Smart” in App market or scan below QR Code
to download.
2.Register Account
If you don’t have an APP account yet, you can choose to register or log in via
SMS verification code. Click “Create a new account”,you will enter the Privacy
page of Tuya Smart Platform.
After you click Agree, you will formally join the registration page of your
mobile phone number.
The system automatically determines the current country/ region.You can also select the country/region manually. After entering your mobile phone number or email address click “get verification code” Enter the received verification code then enter the password and click”finish” to register successfully
WIFI connection 1.Turn on your mobile phone`s Bluetooth and wifi (please make
sure your mobile phone connec t to 2.4Ghz Wi-Fi). 2.Activate the thermostat
WiFi module:When the thermostat is turned on,press and hold the button for 5
seconds,the WIFI icon flashes on the thermostat display,and the thermostat
enters the code matching state 3.Add Device There are 3 ways to add a device
Method 1. Enter the Tuya APP. The main page automatically pops up
“Device to be added” (as picture 1) and click “Add”.
picture 1
Method 2: Enter the Tuya APP,Click “Add Device” or “+” (as picture 2) on the upper right corner of the APP homepage,and enter the “Add Device” interface.It will prompt: find the deviceto be added (as picture 3) and follow the prompts.
picture 2
picture 3
Method 3:Enter the Tuya APP,Click”+”on the upper right corner of the APP homepage,Find the temperature control product (Bluetooth + WIFI model)in the (small household appliance).(as picture 4) As picture 5 ignore the content of the page and tap Next. As picture 6 Ignore the content of the page and click Next As picture 7 tickconfirm the indicator is blimking click Next
picture 4
picture 5
picture 6
picture 7
4.Enter Wi-Fi information Enter the name and password of the 2.4Ghz Wi-Fi (please make sure that the Wi-Fi name and password contain only numbers and letters and not special symbols) Follow the prompts to the next step,you can see the device is being added,and after a few seconds,you will see that the device is added successfully (the length of time will depend on the strength of the wifi signal).
5.Display of temperature controller APP interface
If you encounter any problems during the use of the product, please feel free
to contact us through the purchase platform, we will try our best to help you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>