VEVOR FLO500 Sewage Pump Installation Guide
- June 12, 2024
- VEVOR
Table of Contents
VEVOR FLO500 Sewage Pump
IMPORTANT INFORMATIONS
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
MODEL: FLO500
NEED HELP? CONTACT US!
Have product questions?
Need technical support?
Please feel free to contact us:
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Kindly Reminder
The FLO500 has been developed with the utmost care and it is tested in the factory. Therefore, it is possible that the test water remains in the appliance.
ACCESSORIES
| S/N | Name | Number |
|---|---|---|
| A-B | Check valve with plastic elbow | 1 |
| C | Hose Clamp (32-50mm) | 4 |
| D | Rubber ring to connected the Intelflo toilet and Intelflo pump | 1 |
| E | Plastic hose | 3 |
| F | Activated Carbon | 1 |
| G | Hose Clamp (90-110mm) | 1 |
| H | Hose Clamp (110-120mm) | 1 |
| J | Lid | 1 |
| K | Plug(It Mounted On The Pump) | 2 |
SPECIFICATIONS
The water temperature should be a minimum of 1℃for it is important that the unit does not freeze, and a maximum water temperature is 90℃.
| Input Power Rating: | 500W | Max Vertical Lift: | 8M |
|---|---|---|---|
| Input Voltage: | 220-240V, 50HZ | Max Temperature: | 90℃ |
| Flow Rated: | 110L/MIN | Noise Level: | 45 dBA |
| Max Horizontal Lift: | 80M | Degree of Protection: | IPX4 |
HOW THE UNIT FUNCTIONS
The macerator is simply a tank that is gravity fed from your toilet, washing machine, shower, etc. with a built-in pressure switch that detects the incoming waste and starts a pump combined with cutting blades. This reduces the effluent to an easy-to-pump fluid which is then pumped along small- diameter pipes into the drains. A non-return valve is fitted as standard so enabling the unit to pump up to 8m vertically.
INSTALLATION
-
ELECTRICS
The unit must be installed to current electrical regulations with a fused spur mounted outside the room fused at 3 amps. Wead vise that this is done by a registered electrician. -
Connection
The unit is designed for a horizontal toilet with an outlet of the standard European 18 cm to the outlet centre from the floor. All other in lets must gravity fed into the unit. The outlet comes as standard with a 32mm connection, however, 22 mm can be used with a reducer. What is very important is that the pipe run uses radius bends and is forbidden to use90-degree (right-angle elbows) bends as blockages can occur.
If the water outlet is discharged horizontally, the water pipe must havea1% inclination.
If the sewage is discharged upwards, the horizontal pipe should not exceed 1 ft (30 cm). -
Inlet
The unit can be used just for one input such as a toilet or shower or sink or all at once and blanking covers are provided to allow for this.
WARNINGS
(1) Electrical Installation:
- The connection shall be carried out by a qualified technician and the rules for electrical installations (NEN 1010) shall be met.
- If the power cord of the appliance is damaged, it shall be replaced by the manufacturer or supplier of the appliance. This will avoid creating dangers.
- The connection of your appliance is Class 1.
Connect the appliance to a socket with a protective conductor connection.
(2) Thermal Protection:
- This appliance is equipped with thermal protection which switches off the power supply of the appliance for 2 hours after over heating for safety reasons.
- Power on the electrical connection only when the appliance is fully installed.
- In case of prolonged absence (e.g. vacation), the water supply to the appliance shall be closed.
- Do not expose the appliance to temperatures below0℃or above50℃.
(3) If the indications are not followed, it could cause personal security
risks.
(4) Wrong Use
Use only for human excrement + soluble toilet paper. Equipment damage due to
improper use is not covered by the warranty. Some examples of damage caused by
improper use include grinding cotton wool, tampons, sanitary napkins, panty
liners, food, condoms, towels hair and rinsing liquids, and solvents or oils.
TROUBLE SHOOTINGS
Some malfunctions of the grinder are not practically serious. You can correct it by yourself. To diagnose and find a solution to the Trouble, refer to the diagram below. For other malfunctions, get contact the supplier or a qualified professional.
| MALFUNCTIONS | POSSIBLE CAUSES | SOLUTIONS |
|---|---|---|
| The appliance occasionally starts to work | The connected pipelines are | |
| leaking | Check the installation in front of the appliance | |
| The check valve is leaking | Clean or replace the check valve | |
| The motor is running properly, but the water runs slowly away. | The aerator in | |
| the lid is blocked | Clean the aerator | |
| The engine is running properly but non-stop or runs for a long time | The |
height or length of the drain is too large, or too many bends are used(power
failure)| Check the installation
The pump is blocked| Turn off the power, disassemble the pump and unblock
The motor is not switched on| The power supply is not switched on| Switch the
on power supply (repeat)
The plug is defective| Repair the plug
The trouble with the motor or sensor| Remove the lid, flush clean, and dry the
sensor up(hair dryer)
The motor rattles with a noise| There’s a strange object in the motor| Remove
the lid, clean it and remove the object
The motor is buzzing and does not rotate| The condensator is broken or has
trouble with the motor| Get in contact with a qualified specialist or the
supplier
There’s a strange object in the Remove the lid, clean it and motor| Remove the
lid, clean it and remove the object
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A3ET
Manufacturer: Ningbo YUNSUN Electromechanical Co., Ltd
Address: Building 3 No.7 Hongshen Road Hongtang Industrial ZoneA,
Jiangbei District 315033 Zhejiang P.R. China
Made In China
EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDONOXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany
Technical Support and E-Warranty Certificate
www.vevor.com/support
Documents / Resources
|
VEVOR FLO500 Sewage
Pump
[pdf] Installation Guide
FLO500, FLO500 Sewage Pump, FLO500 Pump, Sewage Pump, Pump
---|---