OMUARK K12 Key Box User Manual
- June 12, 2024
- OMUARK
Table of Contents
OMUARK K12 Key Box User Manual
What’s Included
What are the differences
- OTA upgrade: Support remote software upgrade
- App: Simplified user interface / features
- Strength: increased from two wall mounting screws to three for wall fixing, thus enhancing the stability
Specification
Features
Lock&Unlock
Mobile Control
Battery
Emergency
Quick Start
Step 1 > Install Battery
. Remove the (4) screws on the battery cover
. Put 4 AAA batteries into the battery dock.
Step 2 >Change Admin Password-Initial Admin Password:123456
1. Press and hold for 3 beeps
2. Right after the 3 beeps please key in: Initial Admin Password + +new admin password+ +new admin password+
Step 3 >Download Mobile App
1. Scan QR Code below and download the App and turn on your mobile Bluetooth, you can also choose to download other App supported by Tuya.
https://a.smart321.com/omconnectapp
Step 4 >Add Device
Activate Bluetooth to enter pairing mode
1. Press +9+ and enter Admin password + , when the light slowly blinks in blue the KeyBox is ready to pair.
2.Go to App Home page, click Add Device or click “+” on the upper right.
3. You will see the detected device and click “Go to add”.
4. Connecting, you need to wait for a few seconds to let it finish.
5. Device added
Mechanical Instructions
Password & Factory Mode:
Bluetooth broadcasting & re-connecting:
- Bluetooth broadcasting will turn to sleep mode if no operation within 1 minute.
- Press any key to activate the Bluetooth, App & Device will get reconnected each other.
App Instructions
How to unlock:
How to get Temporary code:
How to add Members:
How to add Permanent code:
How to manage Members:
How to check Opening Log:
www.omconnect.com / www.omuark.com
31 Building, Shahe Rd, Longgang District, Shenzhen 518115, China
Copyright @ 2016 – 2022 OMFOCUS TECH. All rights reserved.