Omuark SOLO Series LockBox Smart Digital Key Safe Lock Box User Manual

Omuark SOLO Series LockBox Smart Digital Key Safe Lock Box

Product Information:

• Model: Solo LockBox
• Material: Solo Body made of Zinc Alloy, SUS304
• Battery: 4 x AAA Alkaline Battery
• Unlock Mechanism: Bluetooth, PIN Code, App
• Jump Start: USB-C
• Dimensions:
  • Front: 43mm (1.69″)
  • Inside Depth: 27mm (1.06″)
  • Back: 43mm (1.69″)
  • Height: 100mm (3.94″)
  • Width: 100mm (3.94″)
• Features:
  • Lock&Unlock:
  • Administrator Unlock: Set a Master Administrator PIN for Unlocking, settings, operations, etc.
  • User Unlock: Allows up to 100 user PIN codes for family, friends, and visitors.
  • Anti-peeping: Add up to 10 digits before and after PIN code to intensify your PINs.
  • Auto Locking: Automatically locks the box if there are no opening motions in 10 seconds.
  • Mobile Control:
  • Bluetooth one-touch unlock: Unlock the LockBox using the mobile app.
  • Offline Unlock: Generate offline code through mobile app for scheduled access, parcel delivery, housekeeping, etc.
  • Mobile Administrator: Set Administrator PIN Codes from your mobile to unlock, add users, delete users, etc.
  • OTA Upgrade: Support remote software upgrade for bug fixes, feature updates, and optimized user experience.
  • Battery:
  • Battery Life: 4 AAA batteries with a life cycle of more than 12 months. Please use good batteries.
  • Low Consumption: BLE broadcasting turns to sleep mode if no operations.
  • Emergency:
    • Jump Start: Use USB-C to jump start the lock and unlock it when the power is down.
    • Low Battery: System will remind you to replace the batteries when they run out of power.
    • System Lockdown: The lock will be locked down for 5 minutes if continuously entering wrong PINs for 5 times.

Product Usage Instructions:

1. Install Battery:
2. Remove the battery cover.
3. Put 4 AAA batteries into the battery dock.
4. Change Admin Password (Initial Admin Password: 123456):
5. Press and hold for 3 beeps.
6. Right after the 3 beeps, enter the initial admin code 123456, followed by the new admin code twice.
7. When you hear a long beep with a green light, the new admin password has been set.
8. Download Mobile App:
9. Scan the provided QR Code and download the app.
10. Turn on your mobile Bluetooth.
11. Add Device:
12. Go to the app home page.
13. Click “Add Device” or click “+” on the upper right.
14. Activate Bluetooth to enter pairing mode.
15. Press “+9+” and enter the Admin password.
16. When the light slowly blinks in blue, the LockBox is ready to pair.
17. You will see the detected device and click “Go” to add it.
18. Wait for a few seconds for the connection to finish.
19. The device is now added.
20. Mechanical Instructions – Password & Factory Mode:
21. Password Length: The password must be 6 digits.
22. Add User Password: Tap “+0+” until the blue light blinks.

What’s Included

What are the differences

• 1. OTA upgrade: Support remote software upgrade
• 2. App: Simplified user interface/features

Specification

• Model: Solo
• Unlock Mechanism: Body Zinc Alloy, SUS304
• Battery: 4 x AAA Alkaline Battery
• Material: Bluetooth, PIN Code, App
• Jump Start: USB-C|

Features

Lock &Unlock

Quick Start

Step 1 >Install Battery

1. Remove the battery cover

2. Put 4 AAA batteries into the battery dock.

Step 2 >Change Admin Password-Initial Admin Password:123456

1. Press and hold for 3 beeps

2. Right after the 3 beeps please key in:
   Initial Admin code 123456 + +new admin code + +new admin code again + , when you hear a long beep with green light, the new admin password has been set.

Step 3 >Download Mobile App

1. Scan QR Code below and download the App and turn on your mobile Bluetooth

Step 4 >Add Device

1. Go to App Home page, click Add Device or click “+” on the upper right.
   Activate Bluetooth to enter pairing mode

2. Press +9+ and enter Admin password + , when the light slowly blinks in blue the KeyBox is ready to pair.
   

3. You will see the detected device and click “Go to add”.

4. Connecting, you need to wait for few seconds to let it finish.

5. Device added

Mechanical Instructions

Password & Factory Mode:

1. Password Length
   Password must be 6 digits (no more no less)

2. Add User Password
   Tap + 0 + until the blue light blinks

3. Enter admin password +

4. Enter new user password +

5. Enter new user password again and press

6. When the (Enter button) blinks in green, user password has been set.

7. Delete User Password
   Tap + 2 + until the blue light blinks

   • Enter admin password and press
   • Enter the user password you wish to delete and press
   • Enter the user password again and press
   • When the (Enter button) blinks in green the password has been deleted.

8. Delete All User Password
   Tap + 00000 + until the blue light blinks

9. Enter admin password and press

10. When the (Enter button) blinks in green, all user passwords have been deleted.

11. Virtual digits-Anti Peeping
    Add any digits before and after the correct password the LockBox unlock as always

12. System Lockdown
    LockBox will Lockdown for 5 minutes if entering wrong password continuously 5 times.

13. Reset Factory Mode
    Use the reset tool press and hold the reset button for 5 seconds until a long beep.

Bluetooth broadcasting & re-connecting:

• Bluetooth will turn to sleep mode and lights out if no operations within 1 minute.
• Touch any key to activate the Bluetooth, LockBox will get reconnected again with App.

App Instructions

How to unlock

• You will see all devices on the home page.

• Tap the Smart Lock Box to start operating.

• Swipe the to the right to unlock.

How to get Temporary code

• Tap “Temporary Code”

• Tap “Obtain Password” to get Dynamic code which is valid for 5 minutes.

• Tap “OK” to confirm and also can Tap “Share” to share this code with family or friend.

How to add Members

• Tap “Member Management” to add family member or others.

• Tap “+” to add member and edit member’s information and save.

• Member will receive an invitation on the App, after he/she accept it, Admin can find the member in the list.

How to add Permanent code

• Tap the Admin “Me” to add Permanent code.

• Tap “Add” to enter the Permanent code you want to set or get Random Permanent code and save.

• You are able to use the Permanent code to unlock the device.

How to manage Members

• Tap the Member you want to manage.

• Tap “Add” to set the Permanent code for the Member and save.

• Tap ”Effective Time” to set this Member is Permanent or Custom and save.

• Set the validity period of Custom Member(Year/Month/Day/Hour/Minute).

• Members have no permission to access admin.

How to check Opening Log

• Tap to check the Log.

• You will find out when and whom opened the Keybox.

www.omconnect.com / www.omuark.com

References

• OMCONNECT
• OMUARK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>