anko 43281183 Modular Touch LED Light Extension Tiles Instruction Manual
- June 12, 2024
- Anko
Table of Contents
anko 43281183 Modular Touch LED Light Extension Tiles
Instruction
Caution: This product is an extension kit for Anko Modular Touch LED Light (KC 43255160). This product cannot be operated independently. No more than 9 tiles (1x original pack + 1x extension kit) can be connected together. Additional extension kits are not supported.
Product Specification
- USB Input Power: DC 5V 2A (USB cable not included)
Accessories Quantities
- Modular lights, double-adhesive tape x 3pcs, USB buckle x3pcs, Fixing buckle × 6pcs
Instruction on Assembling and Using **
**
- Connect the USB buckle at “top” side together with another module facing in the same direction.
- Use the fixing buckle to secure the tiles together.
- Do not connect more than 9 tiles together.
- Connect the USB lead to an unoccupied port to power the lights.
- Touch the center of each light to set the color of single light.
- You can use the remote control in the keycode 43255160 to change the light color.
WARNING: USB ports are only suitable for connecting modular tiles together and connecting the set to USB power using the supplied cable. Do not connect more than 9 tiles together. Do not use the modular tiles to charge or power other devices.
Read User Manual Online (PDF format)
Loading......