BREITLING Endurance Pro Watch Instructions

INSTRUCTIONS FOR USE
ENDURANCE PRO

Endurance Pro Watch

1. Chronograph hour totalizer
2. Chronograph minute totalizer
3. Chronograph seconds hand

A. Start / Stop push piece
B. Reset push piece

| Hour hand
---|---
| Minute hand
| Seconds hand
| Compass rose

PREPARATION FOR USE

DATE ADJUSTMENT – TIME-SETTING

1. Pull the crown out to position 2, and turn it counterclockwise to adjust the calendar to the day prior to the activation date.
2. Pull the crown out to position 3. Turn the hands forward until the correct date jumps into place, at midnight. Then adjust the hour and minute.
3. Push the crown back into position 1.

SPECIAL CHARACTERISTICS

SUN COMPASS
Your Breitling chronometer may be used as a sun compass, thus enabling you to determine North and South. For regions that have instated daylight saving time, subtract one hour
when aligning the watch.

In the Northern Hemisphere
Point the hour hand precisely towards the sun. In relation to the watch dial, the point located midway between the current time and 12 o’clock indicates South, North being exactly opposite.

In the Southern Hemisphere
Point the hour-marker located at 12 o’clock on the dial precisely towards the sun. In relation to the watch dial, the point located midway between the current time and 12 o’clock indicates North, South being exactly opposite.

MAINTENANCE

Your Breitling chronometer is a sophisticated instrument which is constantly subjected to a wide variety of stresses and strains. Within a very small volume, a large number of components contribute to handling all the functions. Their mechanical action inevitably leads to a certain amount of wear and tear, which may be controlled by maintenance consisting of relubrication and replacing worn components. Like any precision measurement instrument, your watch must be regularly maintained in order to function at its highest level of potential: the frequency of this operation varies according to actual use. Breitling or your authorized retailer will be happy to handle the procedure.

WATER RESISTANCE

The movement of your chronometer is protected by a complex case fitted with gaskets to ensure its water resistance. Under the influence of various external agents – perspiration, chlorinated or salt water, cosmetics, fragrances or dust – these gaskets gradually deteriorate. That is why water resistance cannot be permanently guaranteed. If used intensively in water, we recommend having an annual water resistance check conducted. In any event, such an appraisal must be done every two years. This operation, which takes only a few minutes, may be conducted by a Breitling authorized maintenance centre, or by an authorized retailer (www.breitling.com).
Breitling models are water-resistant to varying degrees. The extent of the water resistance, expressed in metres (M), is a standard value and does not indicate an absolute immersion depth. The crown and pushpieces must not under any circumstances be operated under water or when the watch is wet. The table below indicates the conditions in which your watch may reasonably be used, according to its degree of water resistance:

If your watch is equipped with a screw-lock crown, ensure that this is locked before any use in water. This also applies to screw-lock pushpieces.

USEFUL TIPS
Breitling genuine leather straps are crafted with the most refined materials and represent extremely high-quality products. Like all objects in natural skin (shoes, gloves, etc.), their length of life varies considerably, according to the conditions in which they are worn. ln particular, water, cosmetics and perspiration accelerate the ageing process. A metal or synthetic Breitling bracelet is thus better suited to activities involving frequent contact with water or moisture.
Breitling metal cases and bracelets are made from the fi nest alloys and guarantee sturdiness and wearer comfort. Regular cleaning by rinsing and brushing in clean water will keep your watch shiny. This operation is strongly recommended after each immersion in salty or chlorinated water. For watches fitted with a leather strap, the same advice applies, as well as avoiding getting the strap wet.

WHAT TO AVOID
Like any valuable objects, Breitling chronometers deserve special care. It is important to protect them from jarring and knocks by hard objects, and not to expose them to chemical products, solvents, dangerous gases, or magnetic fields. Moreover, your Breitling chronometer is designed to run smoothly at temperatures ranging between 0°C and 50°C.
Please make sure to always stop and reset your chronograph function when not used, in order to preserve the battery life.

Please note that the diagram above is meant for illustrative purposes and might slightly differ from reality.

Breitling Chronograph Super Quartz™

YOUR BREITLING CHRONOMETER
A chronometer is a high-precision time-keeping instrument that has successfully passed the entire battery of tests imposed by the COSC (Swiss Official Chronometer Testing Institute), a neutral and independent body which individually tests each movement according to the specifications in force.

STEP 1
Check whether the crown should be unscrewed (counterclockwise) before you carry out the following steps.

STEP 2
If the watch has no date aperture, pull the crown out to position 3. Set the hour and minute hands.
If the watch does have a date aperture, proceed as follows: pull the crown out to position 2. Turn it clockwise or counterclockwise to adjust it to the day before the activation date. Pull the crown out to position 3. Move the hands forwards until the correct date appears at midnight. Set the hour and minute hands.

STEP 3
Push the crown back into position 1. If you had to unscrew the crown in step 1, follow this final step: press the crown gently, turning it clockwise, then tighten it again until you feel some resistance. Do not force it!

STEP 4
For further details, please refer to the full User Manual which can be accessed by scanning the QR Code on the Quick Start Guide or visit www.breitling.com/user-manuals

WHAT TO AVOID
Like any valuable object, Breitling chronometers deserve special care. It is important to protect them from jarring and knocks by hard objects. Do not expose them to chemical products, solvents, dangerous gases, or magnetic fields. Your Breitling chronometer is designed to run smoothly at temperatures ranging between 0°C and 50°C. Please make sure to always stop and reset your chronograph function when not used, in order to preserve the battery life.

WARRANTY

Please check if your warranty has been activated by scanning the QR Code. Note that Breitling watches purchased from an authorized Breitling retailer are guaranteed against any manufacturing defects, as indicated on our website under www.breitling.com/international-warranty
Detailed information about the specific warranty terms, coverage and exclusions applicable to your product is accessible in your warranty account at www.breitling.com/my-account
Detailed information about our after-sales service and applicable terms and conditions is accessible on our website under www.breitling.com/service- terms

© June 2020, Breitling SA, Switzerland

WARNING
KEEP OUR OF REACH OF CHILDREN Swallowing can lead to chemical burns, perforation of soft tissue, and death.
Severe burns can occur within 2 hours of ingestion. Seek medical attention immediatly.

QUICK START GUIDE
WARRANTY CARD HOLDER

Please note that the diagram above is meant for illustrative purposes and might slightly differ from reality.

DATE APERTURE

References

• General Terms & Conditions for Online Customer Service | Breitling GB

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>