Bowers Wilkins FS-700 S3 Speaker Stands Triple Instruction Manual
- June 12, 2024
- Bowers Wilkins
Table of Contents
Bowers Wilkins FS-700 S3 Speaker Stands Triple
Product Information
The product is the FS-700 S3, which is an assembly kit. It includes various components such as screws, brackets, and other parts needed for assembly. The product is designed to be used with dry sand (Silver / play / silica) and is compatible with models II15954 / 2, 706 S3 / 705 S3, and 707 S3.
Product Usage Instructions
- Start the assembly process by gathering the following components: – 2x ‘a’ – 2x ‘b’ – 2x ‘g’ – 8x ‘c’ – 8x ‘d’ – 1x ‘e’ (3mm) – 1x ‘f’ (4mm) – 8x ‘h’ – 8x ‘i’ – 8x ‘j’
- Begin the assembly by using component ‘a’ followed by component ‘g’ and then component ‘a’ again.
- Proceed to connect components ‘f’ and ‘h’, followed by component ‘g’.
- Attach component ‘i’ and then component ‘j’.
- Continue following the assembly instructions until all components have been used.
- Ensure that the dry sand (Silver/play/silica) is ready for use.
- Use component ‘e’ to complete the assembly process.
- Finally, attach component ‘c’ to the assembled product. Please note that these instructions provide a general overview of the assembly process. For more detailed instructions and diagrams, refer to the full FS-700 S3 Assembly Instructions manual.
Parts
Assembly Instructions
B &W Group Ltd
Dale Road Worthing West Sussex BN11 2BH England
EU Importer:
Bowers & Wilkins Beemdstraat 11 5653 MA Eindhoven The Netherlands
Copyright © B&W Group Ltd. E&0E
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>