AB02-2350-IK1 ActiveBuds

Product Information

Specifications

• Compliance: FCC Part 15
• Interference: Must not cause harmful interference
• Operation: Must accept any interference received

Product Usage Instructions

Installation

1. Choose a suitable location for the device.

2. Ensure that the device is placed away from any potential
   sources of interference.

3. Connect the device into an outlet on a circuit different from
   that to which the interfering equipment is connected.

Operation

To operate the device, follow these steps:

1. Ensure that the device is properly connected to the power
   source.

2. Turn on the device using the power button located on the
   device.

3. Refer to the user interface or display for further instructions
   on how to use the specific features of the device.

Maintenance

To maintain the device’s optimal performance, please adhere to
the following guidelines:

• Regularly clean the device using a soft, dry cloth.

• Avoid exposing the device to extreme temperatures or
  humidity.

• Do not attempt to open or modify the device. Any changes or
  modifications not approved by the manufacturer could void the
  warranty.

Frequently Asked Questions (FAQ)

Q: What should I do if I experience interference while using

the device?

A: If you experience interference, try the following:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and any interfering
  equipment.

• Connect the device into an outlet on a circuit different from
  that to which the interfering equipment is connected.

Q: Is the device compliant with FCC regulations?

A: Yes, the device complies with FCC Part 15 regulations.

Q: Can I modify the device?

A: No, any changes or modifications not approved by the
manufacturer could void the user’s authority to operate the
equipment and may also void the warranty.

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This Ikko ActiveBuds meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: smart phone (2AWCQ- AB02-2350-IK1) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use on the body is 0.702W/kg.. This device was tested for typical body-worn operations with the back of the handset kept 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 5mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>