Berkey 754665 Water View Sight Glass Instructions

June 16, 2024
Berkey

 754665 Water View Sight Glass

Stainless Steel Berkey Water View Sight Glass Faucet
Cleaning and installation instructionsBerkey 754665 Water View Sight Glass -
fig 1

Clean and assemble

Step 1

  • Tighten the threaded nut the end of the tap, as well as the two silicone and stainless steel leathers.
    Remove the protective layer from the stainless steel leathers. Screw the cap loosen from the metal holder while you care that the silicone leather in the cap has run out place remains in place. Place the glass tube just carefully aside so that it doesn’t rolls away.

Step 2

  • Wash the parts in warm soapy water. Lose the silicone leather that is in the cap is not out of sight! The glass tube will leak like the rubber leather is not in place.
  • Do this by hand, not in the do the dishwasher.
  • If necessary, use a soft brush around the glass tube to clean

Step 3

  • Rinse and dry all parts.

  • Place the glass tube in the stainless steel one holder.

  • (Optional) Put the blue ball in the glass tube.

  • Check whether the silicone leather is in the top cap is in place.
    Carefully remove the cap at the top by hand tighten.

  • Continue installation.

Installation

Step 1

  • Make the top and bottom barrels completely empty and remove the old tap out.
  • Check that the cap at the top is secure is closed hand-tight: at the bottom of the glass tube can leak like this not closed properly.
  • Slide a stainless steel ring over the thread of the tap and place it like this that the flat side of the stainless steel barrel has been turned away. (see picture below)
  • Then put a silicone ring over the thread of the tap.

Berkey 754665 Water View Sight Glass - fig 2

Step 2

  • Insert the thread through the hole in it bottom barrel of your Berkey System

  • Place the remaining silicone and metal washers over the thread of the tap, on the inside of the lower one barrel.
    Place the metal ring with the flat side away from the hole in the lower barrel (see first picture)

  • Secure the tap securely with the nut.Berkey 754665 Water View Sight Glass - fig 3

Step 3

  • Check that the rubber band at the bottom of your Berkey System is not constricted by the outer rings of the tap
  • When the tap is open, the handle is straight forward, close it points to the right. Make sure the tap is closed when you are not drawing water.
  •  Your stainless steel Berkey Water View Sight glass tap is now ready for use!Berkey 754665 Water View Sight Glass - fig 4

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals