hansgrohe 26426670 Vernis Blend Showerpipe Instruction Manual

hansgrohe 26426670 Vernis Blend Showerpipe

Product Information

• Product Name: Vernis Blend Showerpipe 200 1jet
• Product Model: 26276XXX / 26285000
• Product Name: Vernis Blend Showerpipe 200 1jet EcoSmart
• Product Model: 26089XXX –
• Product Name: Vernis Blend Showerpipe 200 1jet Green
• Product Model: 26318000
• Product Name: Vernis Blend Showerpipe 240 1jet
• Product Model: 26426670
• Product Name: Vernis Blend Showerpipe 240 1jet EcoSmart
• Product Model: 26428670
• Product Name: Vernis Shape Showerpipe 230 1jet
• Product Model: 2628 6XXX / 26287000
• Product Name: Vernis Shape Showerpipe 240 1jet
• Product Model: 26427670
• Product Name: Vernis Shape Showerpipe 230
• Product Model: Vernis Shape Showerpipe 240
• Product Model: 1jet EcoSmart
• Product Model: 1jet EcoSmart
• Product Model: 26097XXX
• Product Model: 26429670
• Product Name: Vernis Shape Showerpipe 230 1jet Green
• Product Model: 26319000

Product Usage Instructions

Safety Notes:

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The product may only be used for bathing, hygienic, and body cleaning purposes.
• The arm of the shower head is intended only to hold the shower head. Do not load it down with other objects!
• Children as well as adults with physical, mental, and/or sensoric impairments must not use this product without proper supervision.
• Persons under the influence  alcohol or drugs are prohibited from using this product. Please refer to the user manual for further instructions on:
  • Safety Function
  • Adjustment
  • Thermal Disinfection
  • Maintenance
  • Flow Diagram
  • Cleaning

Operation If you experience low water flow, please check the following:

• Insufficient water supply pressure
• Clogged filter screen of the control unit
• Thermostat not adjusted correctly
• Low hot water temperature

For installation instructions, please refer to the user manual.
Note : The user manual provides instructions in multiple languages. Please refer to the appropriate language section for detailed instructions.

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The product may only be used for bathing, hygienic and body cleaning purposes.
• The arm of the shower head is intended only to hold the shower head. Do not load it down with other objects!
• Children as well as adults with physical, mental and/or sensoric impairments must not use this product without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this product.
• Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
• The product may not be used as a holding handle. A separate handle must be installed.
• The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
• The plumbing codes applicable in the respective countries must be observed.
• The installation dimensions stated in these installation instructions are ideal for people of approximately 1800 mm in body height. The dimensions can be altered if required. In this case, pay attention to the fact that a change of installation height will also change the minimum height, and that the altered mounting dimensions must be taken into consideration.
• During installation of the product by qualified trained personnel, make sure that the entire fastening surface is even and smooth (no protruding seams or tile offset), that the finish of the wall is suitable to apply the product and has no weak points.
• The remounted dirt collection screen must be used to prevent dirt from entering through the pipes. Dirt entering can affect the function and/or lead to damage to the functional components of the fitting. Hansgrohe will not be held liable for any resulting damage.
• The product is not designed to be used with steam baths!
• If the continuous water heater causes any problems, or you have different water pressures you must install a water limiter to the cold supply, (ordered separately ,article number 97510000).

Special information for UK
If installing this product with a pump, please be aware that it has to have negative head switching. This product will not function with a positive head pump.

Technical Data

• Operating pressure: max. 1 MPa
• Recommended operating pressure: 0,1 – 0,5 MPa
• Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 60°C
• Centre distance: 150±12 mm
• Connections G 1/2: cold right – hot left
• Safety against backflow
• The product is exclusively designed for drinking water!

Symbol description

•   Do not use silicone containing acetic acid!

• Safety Function
  The desired maximum temperature for example max. 42°C can be pre-set thanks to the safety function.

• Adjustment
  After the installation, the output temperature of the thermostat must be checked. A correction is necessary if the temperature measured at the output differs from the temperature set on the thermostat.

• Thermal disinfection

• Maintenance

  • The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
  • To guarantee the smooth running of the thermostat, it is necessary from time to time to turn the thermostat from total hot to total cold.

• Dimensions

• Flow diagram

  • Overhead shower
  • Hand shower

• Spare parts

  • XXX = Colors
  • 000 = Chrome Plated
  • 670 = Matt Black

• Special accessories order as an extra

  • tile-matching-disk #93813XXX
  • extension 100 mm #94164XXX
  • pipe 945 mm #93770XXX
  • pipe 1145 mm #93907000

• Cleaning

• Operation

To empty the overhead shower after use, hold it in a slightly inclined position.

• Test certificate

Fault: Cause: Remedy

• Insufficient water
  • Supply pressure inadequate
  • Regulator filter dirty
  • Shower filter seal dirty
  • Check water pressure (If a pump has been installed check to see if the pump is working).
  • Clean filter in front of the mixer and on the MTC-thermo cartridge
  • Clean filter seal between shower and hose
• Crossflow, hot water being forced into cold water pipe, or vice versa, when mixer is closed
  • Backflow preventers dirty or leaking
  • Clean backflow preventers, exchange if necessary
• Spout temperature does not correspond with temperature set
  • Thermostat has not been adjusted
  • Hot water temperature too low
  • Adjust thermostat
  • Increase hot water temperature to 42 °C to 60 °C
• Temperature regulation not possible
  • thermo cartridge calcified
  • Exchange thermo cartridge
• Instantaneous heater didn’t work with thermostat
  • Filters are dirty
  • check valve hasn’t moved back
  • Flow limiter in handshower isn’t removed
  • Clean the filter / exchange filter
  • Exchange check valves
  • Remove flow limiter

Maintenance

Adjustment

Safety Function

Thermal disinfection

Operation

open
close

• hot
• cold

Vernis Blend 26270XXX
Vernis Blend EcoSmart 26340XXX
Vernis Blend Green 26090000

Dimension

Vernis Blend Showerpipe 200 1jet
26276XXX / 26285000

Vernis Blend Showerpipe 200 1jet EcoSmart
26089XXX

Vernis Blend Showerpipe 200 1jet Green
26318000

Vernis Shape Showerpipe 230 1jet
26286XXX / 26287000

Vernis Shape Showerpipe 230 1jet EcoSmart
26097XXX

Vernis Shape Showerpipe 230 1jet Green
26319000

Vernis Blend Showerpipe 240 1jet
26426670

Vernis Blend Showerpipe 240 1jet EcoSmart
26428670

Vernis Shape Showerpipe 240 1jet
26427670

Vernis Shape Showerpipe 240 1jet EcoSmart
26429670

• www.hansgrohe.com/cleaning-recommendation

Cleaning recommendation / Warranty / Contact

Just clean: simply rub over the spray nozzles to remove lime scale.

Cleaning

Vernis Blend Showerpipe 200 1jet
26276XXX / 26285000

Vernis Blend Showerpipe 200 1jet EcoSmart
26089XXX

Vernis Blend Showerpipe 200 1jet Green
26318000

Vernis Shape Showerpipe 230 1jet
26286XXX / 26287000

Vernis Shape Showerpipe 230 1jet EcoSmart
26097XXX

Vernis Shape Showerpipe 230 1jet Green
26319000

Vernis Blend Showerpipe 240 1jet
26426670

Vernis Blend Showerpipe 240 1jet EcoSmart
26428670

Vernis Shape Showerpipe 240 1jet
26427670

Vernis Shape Showerpipe 240 1jet EcoSmart
26429670

Test Certification

Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: [email protected]
Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens | hansgrohe INT
• Web Server's Default Page
• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>