XIAOMI DDHBC11NEB Mi Electric Scooter User Manual

XIAOMI DDHBC11NEB Mi Electric Scooter User Manual

Package Contents

• User Manual
• Important Information
• Specifications
• T-shape Allen Key

• Extension Nozzle

  ---

• **9crew

  ---

• Tire
  

• Combination Lock

  ---

• Power Adapter
  

Assembly and Set-Up

• Fold the handlebar shaft up, adjust it and lower the bracket.
  

• Tighten the screws on both sides of the shaft with the Allen Wrench in the form of T.
  
  

  Charge Your Scooter
The scooter is fully charged when the LED an the charger changes from red(charging) to green(trickle charge).

1. Lift up the rubber flap
   

2. Plug the power adapter into the charging port.
   

3. Unplug when charging is completed
   

4. Replace the rubber plug

Connect with Mi Home / Hiamomi Home App

1. The Scooter without being activated will keep beeping when turned on, and its speed is limited to 10 km/h.
   

2. Scan the QR code to download and install the app.

   • The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
     
     

3. Open Mi Home / Hiaomi Home app.

4. Tap “+” on the upper right, and then follow prompts to add your device.
   Note: The version of the app might have been updated, please follow the instructions based on the current app version.

5. Follow the on-screen instructions in the app to activate your scooter for the first use.
   

6. The beeping sound will not stop until the scooter is activated.
   

How To Ride

Warning Wear a helmet, eIbow pads and knee pads

1. Step on the deck with one foot, and slowly kicks of the other on the ground.
   

2. The accelerator initiates once the coasting speed exceeds 5 km/h.
   

3. Release the accelerator and squeeze the brake lever for a sudden brake.
   

4. Tilt your body to the steering direction as you turn, and slowly turn the handlebar.
   

5. Put down the kickstand when parking
   
   

Safety Reminder

Always steer clear of obstacles

Keep your speed be Meen 5-10 km/h when you ride through speed bumps, elevator door stills, bumpy roads or other  surfaces. Slightly bend your knee to better adjust mentioned surfaces.

Watch out for safety risks

Avoid hitting your head on door marries, elevators, and other overhead obstacles.

Do not press the accelerator when you’re
walking alongside the scooter.

Do not ride in traffic lanes or residential areas where
vehicles and pedestrians are both allowed.

Do not abruptly change the steering direction at high speed.

Do not try dangerous actions.

Do not hang bags or other heavy stuff on the handlebar.

Do not ride an one load

Do not accelerate when going downhill, and brake in time to slow down. When encountering a steep incline, you need to step off the scooter and push.

Do not use mobile phone or wear earphones when
operating the scooter.

Do not try dangerous actions.

Do not ride in the rain. Do not ride through puddles or any other(water) obstacles.

Do not ride with anyone else, including children
.

Do not keep your feet on the rear mudguard

Do not touch the disc brake

Do not try dangerous actions.

Do not let go of the handlebar while riding

Do not try riding up or down stairs, nor try jumping over obstacles.

Folding and Carrying

1. Hold the Handlebar Stem, Turn it counter clockwise to open the safety hook and open the quick release leaver.
   

2. Align the bell and the buckle and hook them

3. Hold the stem with one or both hands
   

4. Disengage the bell lever from the buckle on
   the mudguard.
   
   

Adjusting the Disc Brake

Before adjustment, make surethe scooteris powered off and not charging.

Unscrew the valve cap.
3chrauben 8ie den Ventildeckel ab.
Connect the extension nozzle to thetire EN Connect the pump toinflate the tire.

Before making any settings, make sure that the scooter is switched off and not loaded When the brake is applied / released, loosen the screw on the brake calliper with the 4 mm Allen key Slightly insert the brake line (decrease / increase the exposed length) and retighten the screw.

Tire Valve Stem

Unscrew the valve cap

Connect the extension nozzle to the tire

Connect the pump to inflate the tire.

Lock Your Scooter

Lock

Unlock

Set Password

Tap here>’More Settings’>”Set password”

Note: If no password is set, the scooter can be unlocked by the Mi Home/Xiaomi Home app from any of the phones. Make sure you set the password in the app as soon as possible once you get the scooter. In case you forget the password, please go to www.mi.com or contact the after-sales department for help.

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements

For further information. please go to www.mi.com
For detailed e-manual, please go to www.mi.com/global/service/userguide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>